Looks like excellent soap!.. In the USA... pine allen cleans white surfaces extreemly well... Its toxic so I dont touch it. Apply with a 2 gallon pump up sprayer attached to Gardner pole hose, pole and nylex flocked 14" brush, ect, or I can apply with a 12v pump. Rinse with city water and or ro filtered city water on glass. On dirty windows I clean and scrub the same way with either glass gleam 3, lemmon ammonia or pine allen and on cleaner windows... I use Meguires Wash and Wax and rinse with RO filtered water below 5 PPM when cleaning outside. Wash and wax also great for cleaning cars, busses, trucks, vans , aeroplanes, moterhomes, ect. Pre filters include catalytic carbon and standard carbon. I run Hydronic and Dow Filmtec RO Filters. No DI and no spots. If I think I need 0 to 3 ppm water for something I can re-run my ro water through my Filmtec filters a second time. ...and yes I clean with two poles and 2 brushes and I can clean with a wagtail wave or modded highflyer.... and I can allways Trad 27 ways to Sunday inside/outside with Unger, Sorbo, Ettore, Wagtail, Morman, trad tools. I clean a lot of very dirty windows and that is why I use soap😊. My gardner backpack sprayer dosen't put out enough water for high production cleaning and I have several other 12v pumps that put out more water 💦 including running water through the filters strait from the faucet out to the brush.
I first clean down using heat at about 115 degrees 80 bar 25 degrees fan, then spray ionic contact, leave about 10 minutes, then rinse down with set up but no heat. The white work really pops after. The heat removes most things, ionic contact makes it pop.
I'm doing a job tomorrow morning I don't have that kind of set up but definitely would like to get something like that it's just cost. Maybe in the future. Bonkers...
Bonkers vid as always! 🤣🤣 Really helpful info, my backpack has just packed in and trying to scramble together a diy version for a fascia and gutter clean this week 😬 wish I had the cash for this kind of setup!
Great videos as usual and great kit Dave. I work from a car with back pack so limited for room but I spray neat Razr wash on a Gardiner Sill brush (no swivel) wet up with the jets then work in and scrub and then wash/rinse. Use the customers outside tap for water with a hozelock fitting, slightly more basic lol
Thanks for the great video as always Dave, I’ve been cleaning a few more facias etc lately and am finding it hard work scrubbing with the brush and then hosing the soap and dirt off with just a garden hose from the tap! Think I’ll use my jet wash next time and see how that goes, the lance idea looks great but as always it’s the pennies! 😃
Yes, it has happened. I just give them a quick knock either before or after and explain what is happening and give their windows that its sprayed on a wash off
Measure the length of what needs cleaning the multiply it by the amount that you charge per metre. this amount will change depending what area you are working in. ua-cam.com/video/3xl0nZ0nVXQ/v-deo.htmlsi=A6FedPUm8kE-myS5
I know what is the problem. Karcher lances have a straight up nozzle - straight with the pole, and yours have got an angle swivel adapter. So when you spray it, it sprays on the gutter faciae instead of underneath. Cheers Dave
Great informative video as ever. Im seriously thinking of buying a Kranzle next year for pressure washing jobs where my evo 21 isn't suitable. If you get chance Dave, I'd be interested to see how good it would be on say block paving or patios. Thanks. Mark
Ive converted :), used the lance, synergy pro clean, sooooo much easier on the arms / shoulders and a better finish in my opinion...Thanks Dave for your advice and help xxxxx (maybe a bit OTT with the kisses :) )
Bonkers Dave, awsome video as allways! I noticed streamline doesnt equip the the swivel that you have on the poles. It would be easy for using a surface cleaner on it. Do you have any idea if they sell those?
Bonkers 😂 Can you do a video on your big machine the evaluation. All the bits of kit surface cleaner turbo. Just all the tools 🔧 and the size of the quick Releases. 👌
Great video mate. I do mine this way but use a karcher and got there lance but it only reaches about 4 m do you know any others like yours which will fit the karcher
I might as well put BONKERS😂 but don't know why 😂. Anyway... Thank you for your fantastic videos, Dave... You have helped me so much over the years with your problem solving and tutorials. Fantastic stuff👍
Hi Dave , just come across your channel/video, we clean alot of pvc & always looking for faster&less strenuous ways! Do you advise the power pole method? Chemical spray/agitate with brush & then power pole it off wi jet wash
Yes. It's the only way I do it now. I don't know if its actually any quicker with the setup time but it's defiantly easier and has fantastic results especially around gutter brackets where you can't always get to with just a brush.
Dave would use this detergent on solar panels, I cleaned some solar panels the other day and they were an absolute nightmare, I really struggled to get the lichen off,didn’t get all of it off so reduced the price for the customer.
Lichen on solar panels is the worst. Any chemical on solars can void the warranty because of the coatings. I offer a biocide wash which is extra. This doesn't remove it straight away but will over time
I gave the glass a quick misting but I would be very careful about using any actual pressure on it as I've pushed water in through the top just using WFP in the past
Hi dave just a quick one im soon to start up my own business and not sure about what insurance i need and worth having any advice from anyone would be great thanks
Ring Aplan at Carerton and ask to speak to Jack Bowley. He sorts out the public liability. tell him what services you will offer and he will make sure you are covered. You can get cheaper but there is a lot that they don't cover. I was once accused of scratching a window and the insurance didn't cover the glass I was working on. If you do go there tell him I sent you and I get a £50mreward for sending a new customer.
Thanks Dave. As always very detailed, comprehensive and helpful 👍
Bonkers, cool video! Very helpful info! Thanks Dave!
Great video Dave I’m going to give this a go in the future
Looks like excellent soap!..
In the USA... pine allen cleans white surfaces extreemly well... Its toxic so I dont touch it. Apply with a 2 gallon pump up sprayer attached to Gardner pole hose, pole and nylex flocked 14" brush, ect, or I can apply with a 12v pump. Rinse with city water and or ro filtered city water on glass.
On dirty windows I clean and scrub the same way with either glass gleam 3, lemmon ammonia or pine allen and on cleaner windows...
I use Meguires Wash and Wax and rinse with RO filtered water below 5 PPM when cleaning outside. Wash and wax also great for cleaning cars, busses, trucks, vans , aeroplanes, moterhomes, ect.
Pre filters include catalytic carbon and standard carbon. I run Hydronic and Dow Filmtec RO Filters. No DI and no spots. If I think I need 0 to 3 ppm water for something I can re-run my ro water through my Filmtec filters a second time.
...and yes I clean with two poles and 2 brushes and I can clean with a wagtail wave or modded highflyer.... and I can allways Trad 27 ways to Sunday inside/outside with Unger, Sorbo, Ettore, Wagtail, Morman, trad tools.
I clean a lot of very dirty windows and that is why I use soap😊.
My gardner backpack sprayer dosen't put out enough water for high production cleaning and I have several other 12v pumps that put out more water 💦 including running water through the filters strait from the faucet out to the brush.
Bonkers, thanks for the info. Just finished our convention today was tiring but great. Keep up the good work 👍
Thanks for watching all the way 👍
Thanks for watching all the way👍
I first clean down using heat at about 115 degrees 80 bar 25 degrees fan, then spray ionic contact, leave about 10 minutes, then rinse down with set up but no heat. The white work really pops after. The heat removes most things, ionic contact makes it pop.
I really like the pressure washing nozzle idea - smarter not harder 🧠
Definitely 👍
Bonkers Dave. I have a lance made up form a 30 foot fully carbon facelift pole , works great. Equipment is everything in this game .😊
Totally agree with you there. Thanks for watching all the way. 👍
Good video Dave. Interesting to see how others do it. Looks a efficient way of getting the job done. Thanks for sharing 👍
Thanks, Paudie 👍
This could save me poads of time on gutter fascias and soffit cleans .
I'm doing a job tomorrow morning I don't have that kind of set up but definitely would like to get something like that it's just cost. Maybe in the future. Bonkers...
Having QR fittings is such a time and thread saver
So true 👍
Great informative video as per usual Dave
Bonkers vid as always! 🤣🤣 Really helpful info, my backpack has just packed in and trying to scramble together a diy version for a fascia and gutter clean this week 😬 wish I had the cash for this kind of setup!
Great videos as usual and great kit Dave.
I work from a car with back pack so limited for room but I spray neat Razr wash on a Gardiner Sill brush (no swivel) wet up with the jets then work in and scrub and then wash/rinse. Use the customers outside tap for water with a hozelock fitting, slightly more basic lol
It’s definitely help being able to pug into the mains
Thanks for the great video as always Dave, I’ve been cleaning a few more facias etc lately and am finding it hard work scrubbing with the brush and then hosing the soap and dirt off with just a garden hose from the tap! Think I’ll use my jet wash next time and see how that goes, the lance idea looks great but as always it’s the pennies! 😃
They do cost a bit. Have a look at the 18’ alli one in the link. It’s what I started with
BONKERS OCH AYE THE NOOO. Lol
Great video bro! Interesting to see the setup, very professional 😊🤜🏻🤛🏻
Thanks bro 👍
Great video! Quick question though - do you ever get any spray on neighbour’s windows?
Yes, it has happened. I just give them a quick knock either before or after and explain what is happening and give their windows that its sprayed on a wash off
Bonkers
Great advice Dave thanks
Gonna give it a go with my Karcher 👍
Thanks for watching 👍
Hi Dave for someone starting out how would they price a facia and soffit clean
Measure the length of what needs cleaning the multiply it by the amount that you charge per metre. this amount will change depending what area you are working in.
ua-cam.com/video/3xl0nZ0nVXQ/v-deo.htmlsi=A6FedPUm8kE-myS5
I know what is the problem. Karcher lances have a straight up nozzle - straight with the pole, and yours have got an angle swivel adapter. So when you spray it, it sprays on the gutter faciae instead of underneath. Cheers Dave
Great video as per usual dave
Bonkers, hi Dave another great video, how can you connect the pressure washer to a chemical to hydro wash or to use chemical for guttering etc.
I normally apply the chemical with a backpack or the constant flow. That way I know exactly how much I’m using
Great informative video as ever. Im seriously thinking of buying a Kranzle next year for pressure washing jobs where my evo 21 isn't suitable. If you get chance Dave, I'd be interested to see how good it would be on say block paving or patios. Thanks. Mark
Its ok for that but it won't shift the stubborn stains I will put it on the list of videos to do. 👍
@@squeakycleandave1 Much appreciated Dave.
Great video again Dave, keep up the good work... bonkers 😉
Thanks for watching all the way through 👍
Ive converted :), used the lance, synergy pro clean, sooooo much easier on the arms / shoulders and a better finish in my opinion...Thanks Dave for your advice and help xxxxx (maybe a bit OTT with the kisses :) )
🤣🤣🤣
Bonkers mate. Well done.
Thanks for watching all the way through 👍
Very informative and I’ve been at it 27 years keep up the good work 👏👍
Glad it was useful 👍
Bonkers mate! I’m gonna take the plunge and get a lance for my karcher 👍🏻👍🏻
Nice one. Thanks for watching 👍
I'm taking this as an Omen.. I've had my finger on the trigger for buying a K7 this last week 😌
Have you seen the detailing pressure washer by Equip2Clean
thecleaningguide.co.uk/go/pg7r
ua-cam.com/video/5gJR5BIes4Y/v-deo.htmlsi=kL9dAPzWUfScfvJi
Bonkers Dave, awsome video as allways! I noticed streamline doesnt equip the the swivel that you have on the poles. It would be easy for using a surface cleaner on it. Do you have any idea if they sell those?
thanks for watching all the way. Best to ring streamline and ask. If they don't there are plenty of others that do.
Sb window cleaning service, here I was going to Build the same set up👍
Bonkers dave. Great video.
Thanks for watching all the way 👍
Bonkers 😂
Can you do a video on your big machine the evaluation. All the bits of kit surface cleaner turbo. Just all the tools 🔧 and the size of the quick Releases.
👌
Thanks for watching to the end. The pressures washer is on the list 👍
I know Gutter Vacuum Systems do the power poles now as well. That video was bonkers.
Thanks for watching to the end👍
Bonkers😂 another great video Dave 👍
Thanks for watching all the way 👍
great video again Dave - i am bonkers
Thanks for watching all the way Michael
Bonkers hi dave did you use the kranzle for.roof cleaning aswell
Great video mate. I do mine this way but use a karcher and got there lance but it only reaches about 4 m do you know any others like yours which will fit the karcher
amzn.to/3QjC9fv
After you spray the and clean the soffits do you then clean the windows as it’s sprayed all over of the glass
Yes
Can you clean the gutters alone with the pressure washer without using the chemical? Bonkers. Thanks Dave
Hi Dave I would like to know how does this washing system work around cable wire overhead
You have to be very careful
I might as well put BONKERS😂 but don't know why 😂.
Anyway... Thank you for your fantastic videos, Dave...
You have helped me so much over the years with your problem solving and tutorials. Fantastic stuff👍
If you watch the end of the video you will know what bonkers is about 👍
Great Advice thank you
Any recommendations for a budget water purifier
Depends on your water quality and how much water you are going to use
Hi dave
Do you use a generator? If so which one?
Or do you just use the customer's power?
Cheers
I normally use the customers power
Bonkers.
Lol..
Thanks Dave this is awsome
Hi Dave , just come across your channel/video, we clean alot of pvc & always looking for faster&less strenuous ways! Do you advise the power pole method? Chemical spray/agitate with brush & then power pole it off wi jet wash
Yes. It's the only way I do it now. I don't know if its actually any quicker with the setup time but it's defiantly easier and has fantastic results especially around gutter brackets where you can't always get to with just a brush.
Superb! I’m going to get a power pole & run it on low on my 15litre loncin machine
Would a petrol pressure washer be overkill ?
As long as you didn't have it at full power. I use my 30lpm pressure washer with hot box now
Dave where did you get the swivel head for your pole thanks great video
Q services. The link is in the description.
Q services. The link is in the description.
Dave would use this detergent on solar panels, I cleaned some solar panels the other day and they were an absolute nightmare, I really struggled to get the lichen off,didn’t get all of it off so reduced the price for the customer.
Lichen on solar panels is the worst. Any chemical on solars can void the warranty because of the coatings. I offer a biocide wash which is extra. This doesn't remove it straight away but will over time
hi Dave can i ask -did you use the pressure washer on the conservatory roof too - i have few perspects roof to do - will the turbo wash down - fine
I gave the glass a quick misting but I would be very careful about using any actual pressure on it as I've pushed water in through the top just using WFP in the past
Dave your Bonkers lol great video thanks for sharing 😊
Thanks for watching
Bonkers bro 😂 very effective method.. trade secrets 😂😂
thanks bro and thanks for watching all the way 👍
Bonkers, I’m coming up to retirement and wanted to do soft wash and jet washing ,for a bit of extra money any tips thanks
I would definitely recommend going on a course
How do you go on with cleaning the windows after? I started getting complaints so got a pure water set up. I use a hand pump to spray and then a wfp.
I always wash down with pure after
What a Bonkers video 🙂
Thanks for watching all the way 👍
How do you do soffits, always dodgy as they can move and continually drip dirty water from vent holes
Very carefully. Once they have finished dripping go over them with a dry brush or hang a micro fibre cloth over a brush and wipe off the drips.
Bonkers 😂 nice vid cheers 👍
Hi dave just a quick one im soon to start up my own business and not sure about what insurance i need and worth having any advice from anyone would be great thanks
Ring Aplan at Carerton and ask to speak to Jack Bowley. He sorts out the public liability. tell him what services you will offer and he will make sure you are covered.
You can get cheaper but there is a lot that they don't cover. I was once accused of scratching a window and the insurance didn't cover the glass I was working on.
If you do go there tell him I sent you and I get a £50mreward for sending a new customer.
@@squeakycleandave1 cheers bud will tske a look when im home later 🤙
What’s the best hose and reel to use with the jetwash
You are probably best contacting one of the pressure washer suppliers to find that out 👍
Ok thanks great video
What p.s.I are you using on you pressure washer?
Your
The kranzle is 120bar but i normally turn the pressure down
Could you not downstream sh with a jrod then rinse it off
You could do yes
bonkers dave
Thanks Buddy 👍
Bonkers from Australia
Thanks for watching. 👍
Bonkers 🍻
Bonkers ❤
Thanks for watching all the way 👍
Bonkers
Thanks for watching all the way 👍
What’s wrong with your big washer just turner down mate
Nothing wrong with it if i have it on the van but its not kept there so its easier to load up the Kranzle
Bonkers 😂
Thanks for watching all the way 👍
😅
Never seen so much advertising in one video before,
It’s what I use and people have asked to see it. I don’t make anything from it at all
Are you still a witness Dave?
Yes bro
@@squeakycleandave1 thought so bro. Hopefully meet you at some point soon. Thanks for all the videos, you’ve been a great help.
@@bimmernath Glad, you like the videos. Where are you based?
I’m in north Lincolnshire buddy.
@@bimmernath my farther in law used to live in Nocton south Lincs
We have our convention this weekend
Do you not use the lance from equip 2 clean anymore? I was thinking trying 1 with my karcher...
The kartcher works well with the equi2clean lance and I will use it on smaller jobs but I wanted a carbon fibre for higher jobs with a lighter pole
@@squeakycleandave1 I see! Would it work with a K2 karcher?
Bonkers
Bonkers 😂
Thanks for watching 👍
Bonkers
Thanks for watching all the way 👍
Bonkers
Thanks for watching 👍
@@squeakycleandave1 did you enjoy your whisky at the show last year? ...