What can damage a bike? Bicycle rear derailleur repair

Поділитися
Вставка
  • Опубліковано 9 лют 2025
  • Hello my cyclist subscribers. This video is going to be unusual. Once again, a bike was brought to our bike shop that broke down for an unusual reason. As they say, there's always a first time for everything. I've never seen ordinary grass break a bike's shifter before. Because of the grass that was on the bike's shifter sprocket, the rear derailleur holder attachment was broken. I think it would be very useful for you to know which part will prevent a similar breakdown in the future. I'm going to show you how to fix the bike. This will be a short lesson on how to replace the bracket that secures the rear derailleur to the bike frame. Also, I will show you how to adjust the rear derailleur. I will perform the removal and installation of a bicycle's rear derailleur and fix a deformed derailleur frame.
    #derailleur #bikedamage #bikeshop
    🆗🎥🚲
    Write in the comments, what you would like me to do in the new video.
    ❓❔❓
    Ask your questions in the comments
    👇👇👇

КОМЕНТАРІ • 66

  • @NiceBikeService
    @NiceBikeService  9 місяців тому +1

    If you liked this video,
    share this video with your friends ❤
    it will help the development of the channel! 📈
    Thank you for your comment! 😍

  • @JEEROFUKU
    @JEEROFUKU Рік тому +5

    Same s..t happened with me on my commute to work. Rear derailleur’s hanger splits in half and I did walk for an hour till I get to my work place^^

  • @stevengagnon4777
    @stevengagnon4777 Рік тому +2

    Chain is one set of links to short ...it's going to happen again. Yeah I know that is a cross chain gear combination that shouldn't get use , but it's going to done anyway. I do rolling up to a stop sign occasionally and quickly shift out of it as soon as I get rolling again. And those new plastic ferrals ( I like those longer ones too they usually outlast the housing and don't corrode like the metal ones making the adjuster barrel difficult to useless) . Oh I was going to say tug hard(maby use a rag I don't but I've done for decades and skin got a bit tough)on the exposed cable and seat the new housing into the new plastic ferrals the derailleur will stay in adjustment much longer. God Bless You All 🙏

  • @robertgrell486
    @robertgrell486 4 місяці тому

    Fajna robota.Ostatnio też tak się męczyłem z zerwanym wózkiem tylnej przerzutki, Shimano Tourney.Wyrwany gwint ,uszkodzona sprężyna pantografu starty plastik z tym cholernym wpustem do ramy .Ale da się zrobić.

  • @glen3509
    @glen3509 Рік тому +1

    You should try and pick yourself up an XT 770 Shadow rear derailer 👍👍. I bought mine back in 2009 ($190.00🍁) and it still works Great. Altus is ok at best.

  • @NiceBikeService
    @NiceBikeService  Рік тому +1

    ❓❔❓
    *Ask your questions in the comments*
    👇👇👇

  • @spectranoart
    @spectranoart Рік тому +1

    Great job...

  • @TAJcrawn
    @TAJcrawn 5 місяців тому +1

    The same thing happened to me on my bike and it caused damage to the rear wheel.

  • @anonymously241
    @anonymously241 Рік тому +2

    Great job Mr. Nice Guy 🚴👍💯

  • @BostilCensurado
    @BostilCensurado 7 місяців тому +1

    the worst thing when this happens is that it kills your rear tire, even the derailleur might be savable, but the tire will be gone

  • @Spencer0090
    @Spencer0090 11 місяців тому +1

    wonder if you know what my bikes problem is, when i shift gears to smaller sprocket it makes this loud clicking sound but when i put it in the upper gear it goes away! not sure if its coming from the back or the middle and its just not nice to use anymore!! hope you can help me out Thanks!!

    • @NiceBikeService
      @NiceBikeService  11 місяців тому

      Without seeing the bike it's hard to answer. Most likely it's the rear derailleur settings. See if the derailleur rollers are in the same plane as the small sprocket when you shifted to it.

  • @코야나미-d3j
    @코야나미-d3j Рік тому +1

    수리 하는데 수고하셨습니다~!!!

    • @NiceBikeService
      @NiceBikeService  Рік тому +1

      의견 주셔서 감사합니다! ❤️❤️❤️
      이 동영상을 친구들과 공유하세요,
      채널 발전에 도움이 될 것입니다! 📈😘

  • @paulotertuliano1064
    @paulotertuliano1064 Рік тому +1

    Aprendi muito

  • @toannguyenquang1021
    @toannguyenquang1021 Рік тому +1

    Rất bổ ích

    • @NiceBikeService
      @NiceBikeService  Рік тому +1

      Cảm ơn bình luận của bạn! ❤️❤️❤️
      Chia sẻ video này với bạn bè của bạn,
      nó sẽ giúp ích cho sự phát triển của kênh! 📈😘

  • @makantahi3731
    @makantahi3731 11 місяців тому +1

    6:37 properly laced wheel-outer spokes are not power/torque spokes

  • @Dthangmi
    @Dthangmi Рік тому +1

    Hello sir im ur subr..... Need help n vid when i lock quick release of rear n front, wheel do not spin freely after 2/3 secound it slow down

    • @NiceBikeService
      @NiceBikeService  Рік тому +1

      You may need to service hubs, replace balls and cones.

  • @Przemyslaw-H
    @Przemyslaw-H Рік тому +1

    Ptaszki sobie gniazdko uwiły za kasetą 😂 Świetna robota,jak zawsze 👍

  • @romankubasta3499
    @romankubasta3499 Рік тому +1

    Tenkrat se mi stalo neco podobneho. Jel jsem v zime a pri prehazovani se mi dostala prehazovacka nebo raminko prehazovacky do dratu. Jel jsem smikem po naledi a prehazovacka mi urvala dva draty z vypletu. Nevim do dnes z jakeho duvodu se to mohlo stat. Ale o prehazovacku jsem se nejak nestaral.

  • @f.b.6343
    @f.b.6343 Рік тому +1

    Bitte Kettenverschleiß (Längung) messen, nicht vergessen.

  • @makantahi3731
    @makantahi3731 11 місяців тому +1

    it's not the grass's fault, it is the bike of a typical owner who does not take care of the bike or know how to use it properly.

  • @Emtbtoday
    @Emtbtoday Рік тому +1

    That dork disc will be the first thing snapped back off lol

  • @НеизвестныйЧеловек-ъ7л

    Добра робота) 🤌

  • @xcel...1214
    @xcel...1214 Рік тому +1

    Mantap 👍

  • @JuanReverino
    @JuanReverino Рік тому +1

    Buen video

  • @berattaner7370
    @berattaner7370 Рік тому +1

    Tam göstermedin ama keşke zinciride sökmüşken temizleseydin. Birde Shimano zincir kerpeteniyle söküldükyen sonra tekrar aynı zincir baklakarının kullanılmasını önermiyor. Kopma olabilir diyor. Tabii tercih meselesi. Çektiğin video için teşekkür ederim. Her zaman öğrenilecek şeyler vardır.

    • @NiceBikeService
      @NiceBikeService  Рік тому +1

      Rica ederim! Yardımcı olabildiysek ne mutlu!)))

    • @stevengagnon4777
      @stevengagnon4777 Рік тому +1

      That was a KMC chain they uuse a different link than Shimano. The KMC quick connect link is good for a few reconnects . When it doesn't reconnect with a good solid snap into the seat replace it for sure. Shimano's low end connects are certainly single use . I don't use those anyway. I usually use the "break off pin" as much as possible . Those are also single use . But if it's properly installed they rarely fail. I also prefer not to remove a chain until it's being replaced if at all possible. Clean it on the bike and lube often. That chain was overdue and the quick link looked like it snapped in place a little sloppy.

    • @NiceBikeService
      @NiceBikeService  Рік тому

      KMC chains come with a lock that completely eliminates problems with pins

    • @stevengagnon4777
      @stevengagnon4777 Рік тому +1

      @@NiceBikeService still prefer the pins they never fail if properly installed.

    • @NiceBikeService
      @NiceBikeService  Рік тому

      👍

  • @bobwilliamson5574
    @bobwilliamson5574 Рік тому +1

    Mine did the same and snapped my carbon frame at the seat stay.

  • @b.adkonis6802
    @b.adkonis6802 10 місяців тому +1

    Nie ma kawałka smaru na filmie. Słabo jak na serwis.

  • @paulotertuliano1064
    @paulotertuliano1064 Рік тому +1

    AMARÁS AO SENHOR DEUS, DE TODO O TEU CORAÇÃO, DE TODO O TEU ENTENDIMENTO, DE TODAS AS TUAS FORÇAS, E AO TEU PRÓXIMO COMO A TI MESMO, E SIGA A JESUS CRISTO FILHO DO DEUS VIVO E O CONFESSE COMO O SEU ÚNICO SALVADOR.(MANDAMENTOS DO SENHOR.) ENVIEI PARA FAMILIARES E AMIGOS.

  • @paweaaron9058
    @paweaaron9058 Рік тому +1

    Łatwo się naprawia pełni uposażonym serwisie rowerowym niż we własnym zakresie
    Naprawiałem se sam rower
    A miałem uszkodzony hak
    Uszkodzoną kasetę nawet nie dała normalnie odkręcić uszkodziła mi narzędzia koło miało uszkodzone szprychy
    By odkręcić kasetę trzeba było obciąć nakrętkę mocująca kasetę
    Czego nie zrobiłem to ustawienie haka

  • @vitociancia8284
    @vitociancia8284 Рік тому +1

    Video di un'ora per un lavoro di 15 minuti adios 👎👎👎