David, I have seen few people that can so concisely present/describe a repair. Done repair most of my life, and I doubt I have done as good a job as you did here. Thanks!
This video should be required viewing for anyone making how to videos as an example of getting to the point without wasting any time, like talking about the weather.
Thanks for the feedback about the video. I try to include only the needed items. Glad to see that others like it that way as well. Thanks for your time. Make sure to subscribe and check out my other no-nonsense videos haha.
Would also like to add for anyone reading that if you have heated mirrors be careful removing the mirror. There are two wires attached to the back of mirror that can not be removed. I just left the mirror dangling while I replaced the bulb and had no issues. Took abut 3 minutes.
I have tried out and my mirror cracks a bit so I have leave it as it is :( perhaps it's non OEM mirror fitted in and that's the reason why it won't unclips. But yeah video is cool, keep making stuff like this it's really helpful, direct to point step by step 👍😉 I haven't enough luck I suppose 🤔 all the best 😉
Don't try to pull that mirror off if it's cold outside, either it'll break or the mounting tabs will. Warm it up with a heat gun ( take your time) 1st! Otherwise, very straightforward vid! Thx for posting!
Bro!!! Top notch video. I do all my own work...I mean...with help from UA-cam. But seriously I just did exact same job on drivers side - super easy - thx for paving the way. Took 40mins start to finish and thats with an IPA in one hand🤪
Being informed is the first step. I always tell people to watch all the videos because one day......you will need one of them and hopefully you will remember how or where you saw it. Thanks for watching and make sure to share
Just curious to know if that was a motorized mirror that you unsnapped off? I just wanna make sure that I do it right and not damage any motorized parts. Thanks!
Tried to do this to replace the plastic housing. Broke the mirror 😅😅 I guess I was too rough? Your mirror just popped out so easily! I don't understand. Oh well, I bought a mirror, and I'll try to pop the mirror out with care this time
SoundandVideoRentals Your welcome. Thanks for checking the video out and for the comments. Glad to see that you found your answer. Thanks for having subscribed!
Thanks for the video. I got the mirror glass off hoping I'd be able to access the ambient air temp sensor which is bad. Does the lower mirror pop off the same way?
Old vid, but I'm sure this will help me a lot changing turn signal lense which I cracked. Is the mirror part pop out going to add easy on 2018 cargo van heated extended mirror? TIA
Do you have a link for the plastic cover. I have been looking for one . For 2021 pro master 3500. And no has it. Dodge wants to sell me the whole mirror assembly. For $800 . And all I need is the plastic cover you just removed.
I do have one. ua-cam.com/video/cdPF1l98lXU/v-deo.html . You can access the bulbs without removal but its too hard to explain and not enough room to film. Its more of a touchy feely thing. You have to do it blind and use yours hands as your eyes. The video link that I attached will show you how to take the entire assembly off and you will have more access. Make sure to subscribe and you can search thru the playlists on the channel and find everything I have on Promasters under the Promaster playlist. Dont forget to share the videos with others.
@@MotorCityMechanic yes of course, a video for the complete replacement of the rearview mirror would be useful, when you have time can you do it? thanks bye
Thanks for the kind words. Not sure whats avail in the aftermarket world.....the first place I would check is the dealer and then research (google) the part number to see who has it the cheapest. Thats if its avail separate or if it has to come with the entire mirror. Thanks for asking and for watching. Make sure to subscribe.
Be aware people, if you have non genuine/aftermarket mirrors, (like i do) when you grab the bottom of the mirror to un-click it ,in doing this you may well break your mirror motor mounting on the back of the mirror glass, thats what just happened to me, (another good reason never to by cheap non genuine/OEM rubbish)
One thing I have learned over the years when working on cars.....stick with OEM parts when ever possible. I havent had much luck with anything aftermarket so I avoid them when ever possible. Thanks for the warning and for watching. Make sure to subscribe
Actually its even easier. You pull the mirror/glass off just like on the larger Promaster and then you have access to the bulb. No lens assembly to pull off and no screws to remove. Thanks for the question and make sure to subscribe if you havent already.
The procedure is different. It's actually easier. I will try to film the bulb replacement soon and check on that button you mentioned. Make sure to subscribe so that you get notified when I upload videos such as that.
I have a 2016 ProMaster that I need the bottom mirror for the driver side and also the lens cover for the blinker light that's on the mirror. do you have any idea where I can purchase those besides the dealership, the dealership is trying to make me purchase the whole mirror assembly
Cody......email me the VIN number and I will see what is avail when I get back to work tommorrow. Email me at david@motorcitymechanic.com and I will check further.
Hi how are you, I have a ram promaster 2014 and I just purchased the whole assembly for the driver side on amazon, I really need help installing it though Anyway you can do a video on that?
🤬 F*** Chrysler. I bought the bulb the owners manual recommended and it doesn’t work. This video knows the part number better than the damn manufacturer
Just had an Amazon truck with this problem. A great tutorial, and saved me lots of time. Thank you
David, I have seen few people that can so concisely present/describe a repair. Done repair most of my life, and I doubt I have done as good a job as you did here. Thanks!
This video should be required viewing for anyone making how to videos as an example of getting to the point without wasting any time, like talking about the weather.
Wow…..those are some very kind words! Many many thanks
Well done! Quick and to the point! I love that there isnt filler video of you messing around, just the info I need. Keep it up!
Thanks for the feedback about the video. I try to include only the needed items. Glad to see that others like it that way as well. Thanks for your time. Make sure to subscribe and check out my other no-nonsense videos haha.
I agree one of the best I’ve seen.
Would also like to add for anyone reading that if you have heated mirrors be careful removing the mirror. There are two wires attached to the back of mirror that can not be removed. I just left the mirror dangling while I replaced the bulb and had no issues. Took abut 3 minutes.
Great tip!
Same mirror as a Peugeot Boxer, Citroën Relay and a Fiat Ducato. Excellent video, thank you
If you push the mirror glass inwards beside the flasher - you can access the screws without pulling the mirror glass off.
Appreciate the tip
Hummm, it takes 2 seconds to remove the glass to have an unobstructed access and view. I remove the glass like he did. JMO
I have tried out and my mirror cracks a bit so I have leave it as it is :( perhaps it's non OEM mirror fitted in and that's the reason why it won't unclips. But yeah video is cool, keep making stuff like this it's really helpful, direct to point step by step 👍😉 I haven't enough luck I suppose 🤔 all the best 😉
Sorry it turned out that way, Thanks for watching and for the kind words. Make sure to subscribe and Merry Christmas
Don't try to pull that mirror off if it's cold outside, either it'll break or the mounting tabs will. Warm it up with a heat gun ( take your time) 1st! Otherwise, very straightforward vid! Thx for posting!
Just saved me a lot of money on bulb replacement DIY…Thanks
Bro!!! Top notch video. I do all my own work...I mean...with help from UA-cam. But seriously I just did exact same job on drivers side - super easy - thx for paving the way. Took 40mins start to finish and thats with an IPA in one hand🤪
Thanks Bro! Does this same procedure work on my 2021 Ram ProMaster?
Good job Dave. Thanks for sharing your knowledge to make life a little easier for others.
Thanks Raymond. I try to help when ever I can. Thanks for the comment
Thank you! I’ll be doing this tomorrow! Now to find your video on the license plate light!
Thank you for that, are vans in UK are fiat ducato but same as damit good video well presented
Many thanks Geoffrey. They change a few items and give it a new name......same basic vehicle. Appreciate the comment and make sure to subscribe
Yes thanks again for a quick reply. Just viewed the video about the head lamps. As with the others, great demo.
Cool, thanks for the kind words. Keep watching!
Good video and straight to the point. Thanks
appreciate the feedback!
This was a great video. You did a great job 👍🏾
Thank you so much!
No problem bro thank you. Keep up the good work 👍🏾💪🏾
Excellent easy-to-do DIY videos. Thank you for sharing it with us! Is it the same process for the 2020 RAM PM?
great jog never thought it was held in by two screws.
Yes such an informative video i can do this myself
Thanks for this. About to do this today
Your welcome
Thanks much, very helpful indeed. Always wondered how I would get this done when the time came around!
Tim
Being informed is the first step. I always tell people to watch all the videos because one day......you will need one of them and hopefully you will remember how or where you saw it. Thanks for watching and make sure to share
Thank You David.
Your welcome Gary!
BRILLIANT!
Just curious to know if that was a motorized mirror that you unsnapped off? I just wanna make sure that I do it right and not damage any motorized parts. Thanks!
Same mirror for Peugeot Boxer, Thanks from Spain
Thanks for the info and for watching. Make sure to subscribe
Tried to do this to replace the plastic housing. Broke the mirror 😅😅
I guess I was too rough? Your mirror just popped out so easily! I don't understand.
Oh well, I bought a mirror, and I'll try to pop the mirror out with care this time
A+++ you make it look EZ
Saw the answer below. Thanks much!
SoundandVideoRentals Your welcome. Thanks for checking the video out and for the comments. Glad to see that you found your answer. Thanks for having subscribed!
Thanks for the video. I got the mirror glass off hoping I'd be able to access the ambient air temp sensor which is bad. Does the lower mirror pop off the same way?
Old vid, but I'm sure this will help me a lot changing turn signal lense which I cracked. Is the mirror part pop out going to add easy on 2018 cargo van heated extended mirror? TIA
What's the bulb part number?
Part #921.
Super. Dzięki kolego.
Thank you so much Im a need for that
Thank you very much 🙏
What's the part number for the female socket associated with the bulb?
Thanks a lot
2017 and up has a full clear lens that takes an amber 921 style bulb. Dodge part number: 68384917AA
Thanks a bunch
Excellent, thanks !!
Thank you - helped me out :-)
Your welcome and thanks for watching. Make sure to subscribe.
What is the bulb size number? Need to do a few of these fleet mechanic here for Amazon vans
Do you have a link for the plastic cover. I have been looking for one . For 2021 pro master 3500. And no has it. Dodge wants to sell me the whole mirror assembly. For $800 . And all I need is the plastic cover you just removed.
Thank you very much. I have a Promaster and bulbs seem to be burning out.
Could you do a video on replacement of the head lamps?
I do have one. ua-cam.com/video/cdPF1l98lXU/v-deo.html . You can access the bulbs without removal but its too hard to explain and not enough room to film. Its more of a touchy feely thing. You have to do it blind and use yours hands as your eyes. The video link that I attached will show you how to take the entire assembly off and you will have more access. Make sure to subscribe and you can search thru the playlists on the channel and find everything I have on Promasters under the Promaster playlist. Dont forget to share the videos with others.
Thanks man!
It helps a lot because now we know where those fingers are.
Very true.....something about pulling in a mirror that worries me if you dont know how it will come off lol.
Ottimo video Grazie 👍
Prego. Grazie per la visione e assicurati di iscriverti.
@@MotorCityMechanic yes of course, a video for the complete replacement of the rearview mirror would be useful, when you have time can you do it?
thanks bye
Thank You bro!!!!
Thank you good sir!
Your welcome and thank you. Make sure to subscribe!
Thank you
Hey David, Great Video... was wondering where I can get a replacement mirror from? This is the one you just popped off in this video
Thanks for the kind words. Not sure whats avail in the aftermarket world.....the first place I would check is the dealer and then research (google) the part number to see who has it the cheapest. Thats if its avail separate or if it has to come with the entire mirror. Thanks for asking and for watching. Make sure to subscribe.
Good video bro
can you swap in a heated mirror into a standard side mirror and run wires and a switch for a converted standard mirror into a heated mirror?
Good Video thanks helps a lot
Thanks for this video!
Your welcome. Appreciate you watching. Subscribe and check out my other videos.
A few of your videos have helped me out. Saved me from having to go to the dealership and get ripped off. I'm subscribed!
Much appreciated and glad I could help out!
That worked great thank you
Nice
I need a turn signal light replacement on the headlight housing.
Be aware people, if you have non genuine/aftermarket mirrors, (like i do) when you grab the bottom of the mirror to un-click it ,in doing this you may well break your mirror motor mounting on the back of the mirror glass, thats what just happened to me, (another good reason never to by cheap non genuine/OEM
rubbish)
One thing I have learned over the years when working on cars.....stick with OEM parts when ever possible. I havent had much luck with anything aftermarket so I avoid them when ever possible. Thanks for the warning and for watching. Make sure to subscribe
Is the procedure the same if you have power mirrors?
The mirror in the video was power so it should be exactly the same. Thanks for watching and dont forget to subscribe!
Gracias .......
will this work for 2018?
David, Thanks for a very informative video, I have a Promaster City, the mirrors look very similar, will the repair be the same?
Thanks again.
Actually its even easier. You pull the mirror/glass off just like on the larger Promaster and then you have access to the bulb. No lens assembly to pull off and no screws to remove. Thanks for the question and make sure to subscribe if you havent already.
I have a 2017 heated power mirrors looks the same, will it be the same?
From what I can see it should be. Thanks for watching and for the question.
BTW just replaced mi side mirror bulb and the bulb is amber color!
Is it the same procedure for the pro master city? Also what's the little button on the bottom of the mirror? Thanks
The procedure is different. It's actually easier. I will try to film the bulb replacement soon and check on that button you mentioned. Make sure to subscribe so that you get notified when I upload videos such as that.
This is super helpful, do you have a venmo??
Whats the bulb size?
By any chance do you know where the ambient air temperature sensor is on 2017 promaster thanks
Should be in the LF (drivers) mirror assembly. Its that "bump" underneath
MotorCity Mechanic thanks
@@jsdabjdbrd Your welcome Jose!
I have a 2016 ProMaster that I need the bottom mirror for the driver side and also the lens cover for the blinker light that's on the mirror. do you have any idea where I can purchase those besides the dealership, the dealership is trying to make me purchase the whole mirror assembly
Cody......email me the VIN number and I will see what is avail when I get back to work tommorrow. Email me at david@motorcitymechanic.com and I will check further.
how to replace the ambien sensor on my 2014 promaster
Hi how are you, I have a ram promaster 2014 and I just purchased the whole assembly for the driver side on amazon, I really need help installing it though Anyway you can do a video on that?
1500 model
I will try to keep it in mind....I need to have one come into the shop for me to video the repair. I cant promise how soon however.
Marker lights on 2015 pro master not working on top of van and the rear
Too bad. Without that Amber hood a nice LED would probably fit. There are complete LED replacement assemblies though.
hah broke my mirror in half doing this.
ggod man
Many thanks!
You do not have to take the card to this ...
🤬 F*** Chrysler. I bought the bulb the owners manual recommended and it doesn’t work. This video knows the part number better than the damn manufacturer
No warning whatsoever that the mirror could crack when grabbing it at the bottom. No word how to pull it so that it doesn't crack.
These vans are total junk
Depends on how they are maintained. I have customers that have 400,000-500,000 miles on theirs
Thank you
Thank you!
Thank you
You're welcome, thanks for the feedback
Thank you