I'm building my first cage and have some very complex joins in tight spaces. I purchased the Center Line Marking Tool , Laser pointer, Laser Alignment Tool, and 1 1/2 " Tube Tracer. Centurial was excellent with communication on the order and shipment tracking. I'm very pleased with the construction and operation of the tools. As for previous comments on locking the pins when tracing, it doesn't seem like an issue, but I cut a section of bicycle tubing to make a wide rubber band and that works great. These are awesome tools especially for the price.
Thank you very much for the kind and very detailed comment. The pins are tuff we did our best to get the friction just right. We like the rubber band idea we might add that to the kit. Thanks for sharing that little tip. Please keep us up to date with the longevity of the tools. And don't forget we have a 1 yr warranty if you start have issues let us know.
Just found out about you from red beard garage video on your diy tubing notcher kit with the drill press. Very excited about your product I will be doing a motorcycle frame and side car build in the winter if all goes according to plan. I believe it will work out nicely for that and keep it straight. Please make more videos
Thank you and we sure will. We are in the middle of some other projects that are cnc machine related but we hope to be back on fabrication soon and that means more content related to that. Let us know if you need anything. There tube notcher dose have a size limitation at the moment. It can't use any hole saws below 1-1/4. So if your going to use 1 inch or 3/4 just know an adapter will need to be custom made.
Thank you for watching and the comment. Those techniques work best in complex situations like a full race car chassis. More videos on that coming soon.
Good question. We have not tested other brands to see if they are compatible. But we have a 2 year no questions asked warranty. You can try it out and let us know if it works or not. If not we will warranty the tools and do a full refund.
Mother pipe was 217 mm and branch pipes are 160 mm and 150 mm diameter and also 4 pieces are joining into one location please explain to how cut back the 4 pipe pieces and how develop the cut back . And also 4 branches are18 degree and 22 degree
Thank you. We will take that as a compliment. We follow lean practices and it's easy for us build these at low cost. More videos on that in the future. Best Matt
You have the right concept.. but wrong application. Thought on this before.. same concept.... you take a rough dimension of a part... height of the pins... and location give a rough stock boundary to generate a simple one tool roughing op... . you link that at the automatic saw.... and use it as a training lead in for potential applicants looking for a future in skilled occupations
Thanks for watching and the comment. We see best results from beginners who need that extra guidance to speed up the imagination portion of fabrication. Very good process you recommended right there. Beginners often times just stare and have no direction at first cause it's so new and foreign. The tracer helps them see directly what they will in time imagine. Same for the string line tools. Thanks again for the comment.
Так ми робимо. З DHL має зайняти близько 5 днів. Надішліть нам електронний лист на веб-сайті, і ми допоможемо отримати інструменти. Я очікую, що будуть певні проблеми, як зараз.
Не стоят эти приспособы 310 долларов . Тоже самое сделаю чуть медленнее но дешевле в 20 раз . Тот кто хорошо соображает в геометрии тому такие приспособы не нужны .
Медленнее не дешевле. Вы должны учитывать время вашего магазина и заработную плату. Кроме того, у нас открытый исходный код, поэтому, если у вас есть 3D-принтер, вы можете сделать его самостоятельно. Не нужно покупать их у нас.
Just got mine. They were super helpful in getting me lined out with what I needed
Awesome to hear that! What are you building?
Well you just sold me on your products. Looks like its going to help me out tremendously on building my cage. Thanks for making it affordable too.
We love the these tools. Most customers buy just what they need for their build. The magnet tools are the most useful
.
I'm building my first cage and have some very complex joins in tight spaces. I purchased the Center Line Marking Tool
, Laser pointer, Laser Alignment Tool, and 1 1/2 " Tube Tracer. Centurial was excellent with communication on the order and shipment tracking. I'm very pleased with the construction and operation of the tools. As for previous comments on locking the pins when tracing, it doesn't seem like an issue, but I cut a section of bicycle tubing to make a wide rubber band and that works great. These are awesome tools especially for the price.
Thank you very much for the kind and very detailed comment. The pins are tuff we did our best to get the friction just right. We like the rubber band idea we might add that to the kit. Thanks for sharing that little tip. Please keep us up to date with the longevity of the tools. And don't forget we have a 1 yr warranty if you start have issues let us know.
When you have been doing S/S pipe work for years then you slap your forehead when you find this tool!!
Nice piece of kit!!!!
lol, I know that feeling. We did roll cages and race car chassis for years with out them and hated it. Thanks for the comment and watching.
Just found out about you from red beard garage video on your diy tubing notcher kit with the drill press. Very excited about your product I will be doing a motorcycle frame and side car build in the winter if all goes according to plan. I believe it will work out nicely for that and keep it straight. Please make more videos
Thank you and we sure will. We are in the middle of some other projects that are cnc machine related but we hope to be back on fabrication soon and that means more content related to that. Let us know if you need anything. There tube notcher dose have a size limitation at the moment. It can't use any hole saws below 1-1/4. So if your going to use 1 inch or 3/4 just know an adapter will need to be custom made.
@@centurialinc Thanks for the heads up.
awesome, technique Thanks Century Inc.
Thank you for watching and the comment. Those techniques work best in complex situations like a full race car chassis. More videos on that coming soon.
Thank you for the information
My pleasure
잘 보고 갑니다~^^Gooooood
감사합니다
will the newest laser adpaters fit my "other brand" tube coping trace tool ?
Good question. We have not tested other brands to see if they are compatible. But we have a 2 year no questions asked warranty. You can try it out and let us know if it works or not. If not we will warranty the tools and do a full refund.
I can't wait until mine come here in a couple of day
Awesome! what are you building?
@@centurialinc I am rebuilding my racing simulator. And planning make a few more
Sweet! do you post your work on social media?
Nice tool
Thanks, we appreciate you watching and the comment. Best Matt
Exelente material está maravilla en dónde la puedo conseguir y asta que diámetro de tuberías manejan y el costo saludos desde San Luis Potosí México
Thank You.
Hello Sirs. I'd like to know more about your products for chassis and roll cage fabrication. Your website is not available right now. Thanks.
Hi, thank you for letting us know. Yes the website is down. We are trying to fix it right now. I will inform you when it is working again.
Website is working again. If you have questions you can email us we would be happy to help.
Guys, you are complicating it.
Painters tape and scrap material.
very underrated.🍻🇨🇦👨🏭
facts!
Not sure what you mean got a video?
Mother pipe was 217 mm and branch pipes are 160 mm and 150 mm diameter and also 4 pieces are joining into one location please explain to how cut back the 4 pipe pieces and how develop the cut back . And also 4 branches are18 degree and 22 degree
Thank you. We do not work with those sizes. That is Pipe work. We only work with tube for race car fabrication.
Were can i get a tool like that ?
from here. www.centurialinc.com/
좋아요 !👍👍👍
감사합니다! Thank you!
I want this
website is here. www.centurialinc.com/
do you have a 3d printer? You can make these with one at home.
This pipe copying tool.name pls and ,, which site this tool.availabile plz help.
www.centurialinc.com/tube-coping-tools
Thanks for the comment.
What tool is that
Tube tracer. You can get the here. www.centurialinc.com/tube-coping-tools
Angle grander miter saw and some creativity works too
Yes it does, we did that for years. But now that we have the tools we love them. Thanks for watching and the comment. Best Matt.
😲😲😲😲😲😲😲😨😨😨😨😨😨😨🤯thks¡¡¡
Thank you.
There needs to be a way to lock the pins in place .
That is a very good idea! We will try to make that happen. Thanks for watching and the comment.
trace locking mechanism..is reqiured
Good idea. We will work on it.
Prices are way to low.
Thank you. We will take that as a compliment. We follow lean practices and it's easy for us build these at low cost. More videos on that in the future.
Best Matt
You have the right concept.. but wrong application. Thought on this before.. same concept.... you take a rough dimension of a part... height of the pins... and location give a rough stock boundary to generate a simple one tool roughing op... . you link that at the automatic saw.... and use it as a training lead in for potential applicants looking for a future in skilled occupations
Thanks for watching and the comment. We see best results from beginners who need that extra guidance to speed up the imagination portion of fabrication. Very good process you recommended right there. Beginners often times just stare and have no direction at first cause it's so new and foreign. The tracer helps them see directly what they will in time imagine. Same for the string line tools. Thanks again for the comment.
Slick as shit
Thank you all open source too. 3D print friendly.
Доброго дня відправляєте в Україну?
Так ми робимо. З DHL має зайняти близько 5 днів. Надішліть нам електронний лист на веб-сайті, і ми допоможемо отримати інструменти. Я очікую, що будуть певні проблеми, як зараз.
Не стоят эти приспособы 310 долларов . Тоже самое сделаю чуть медленнее но дешевле в 20 раз . Тот кто хорошо соображает в геометрии тому такие приспособы не нужны .
Медленнее не дешевле. Вы должны учитывать время вашего магазина и заработную плату. Кроме того, у нас открытый исходный код, поэтому, если у вас есть 3D-принтер, вы можете сделать его самостоятельно. Не нужно покупать их у нас.