4 months later and I have now to cut some pipe to be welded. This 'notcher' came t mind, so I came back here to remind me how to build one. Thanks again Diamleon.
Would love more ‘how to make’ (dimensions, instructions, etc.) less ‘watch me make,’ but anyone interested could probably reverse engineer it, or any off the shelf notcher. Better than HF for sure.
@@8SecSleeper The evidence is that I still have my two eyes and all 10 fingers. I've been around power tools and machinery for the last 30 years. These things don't take prisoners. I've witnessed people loosing eyes and fingers because of stupidity and by ignoring basic safety rules. A safety guard on an angle grinder is there for a reason. Show-offs and cocky lads are not welcome in my crew and are dismissed on the spot without any discussions. BECAUSE, I've to explain to relatives and authorities what, why and when. Does this now answers your question?
Good work, but there are 2 things I see that could be improved. Distance between bearings should be increased a bit to make it more stable and distance from the pivot reduced to minimum required. Other than that it's cool. The crown saw was a total wreck after 2 cuts, less speed and pressure recommended on cutting or switch it for an abrasive one. Cheers!
Два прохода- коронку приконьчил.. И только под один диаметр трубы..? Которых я в жизни не видел.. мне иногда за день приходится и с поручнями нержавейка 38мм и 50мм и велосипедную раму фэтбайка надо подсобрать..14мм и 18 и 25 бывает.. нужны в этой направляющей регулировки высоты центров под разные толщины труб..
First off how did you determine the hole saw was centered on your tube holder and #2 what are you going to do with the notched tube if you don't have a welder, glue or bolt it together?
Not so simple build! Can’t get lathe machine, hand tap and dies set, lack instructions for centering pipe clamps and centering drill! I will just stick to notching template and band saw
4 months later and I have now to cut some pipe to be welded. This 'notcher' came t mind, so I came back here to remind me how to build one.
Thanks again Diamleon.
Thank you very much dear
@@DiamleonDiyBuilds 😀
Good job 💥💥💥💥👍
Thank you man
Ох как бы этот станочек мне сегодня был бы сегодня нужен. Делаю перила из трубы.😊👍👍👍
Excellent bricolage ingénieux.Bravo.
PERFECT I LOVE THAT NOTCHER THE ONLYBTHING IS THAT IT WOULD BE NICE IF WE COULD SEE WHAT THE DIMENSIONS ARE.
Lovely work! Topnotch! 🙌
Thank you man
Ide kreatif sekali... mantap
الله ينور
Excelente trabajo, muy práctico.
Thanks dear
Would love more ‘how to make’ (dimensions, instructions, etc.) less ‘watch me make,’ but anyone interested could probably reverse engineer it, or any off the shelf notcher. Better than HF for sure.
Mesmerizing!.. A metal working artist!...
Thank you very much dear
Absolutely brilliant well done be got take one heersbuddy
Thank you very much dear
Mastered the job Boss!! Great 👍
Thanks dude
Excellent project 👍
Thank you very much dear
👍✅
Thanks man
Muito prático, engenhoso, não pratico, mas adoro ver executar ferramentas.
Z*‰p
Приветствую! 👍
Wow, amazing idea bro !!! 1 like for you!
Thank you very much bro
Good job
Thanks dear
com esta ferramenta dá para fazer esfetas de madeira 👍👍🇧🇷
Hello mister good idea good job
Thank you very much dear. And thanks for supporting me.
عالی
Salute.
nice build. it works well!
Thanks dear
Okay, you officially have a new subscriber. Your work is impeccable. Such quality and precision. Enjoying all your projects so far
Thank you very much dear
WoW Very Very Excellent ❤️👊👊
Thank you very much dear
one thing Im sure of is that the bolts are beyond tight enough. Just begging to strip the threads 😅
جميل❤
Put that guard on the angle grinder mate!!! That face shield wont save you if the disk shatters. Don't ask how I know...
@@8SecSleeper The evidence is that I still have my two eyes and all 10 fingers. I've been around power tools and machinery for the last 30 years. These things don't take prisoners. I've witnessed people loosing eyes and fingers because of stupidity and by ignoring basic safety rules. A safety guard on an angle grinder is there for a reason. Show-offs and cocky lads are not welcome in my crew and are dismissed on the spot without any discussions. BECAUSE, I've to explain to relatives and authorities what, why and when. Does this now answers your question?
Nice sharing
Thanks bro
Nice job, especially if you do not have a welder.
Yes. Thank you bro
Heavy duty job boss
Thanks bro
Superbbbb
Thank you bro
Top 🎉🎉❤
Thanks man
Super 👍 🤝
Thanku
bom trabalho.
om ideal, é mostrar as medidas.
Nice work, but move the two pillow blocks closer to the pipe
Ok thanks for your suggestion
and reduce the separation between pillows to reduce bending
Nice Jig /Craftsmanship,my only negative comment is how watch my. Videos with Headphones on and the Music track gave me a massive head ache
Thanks for your feedback bro
No welder required, a lathe on the other hand.... 😉
Good work, but there are 2 things I see that could be improved. Distance between bearings should be increased a bit to make it more stable and distance from the pivot reduced to minimum required. Other than that it's cool. The crown saw was a total wreck after 2 cuts, less speed and pressure recommended on cutting or switch it for an abrasive one. Cheers!
Thanks for your suggestions bro
Pon medidas tio!!!🤔
Good idea. Can be much improved. Needs more efficient cooling and rigid clamping. Speed way too fast.
Thanku
Panç köreldi. Elmas panç kullanmalısın
Very nice build. Too bad the hole saw teeth got destroyed after two cuts. The Jig will last a lifetime though.
Thank you very much bro
Мало степеней свободы шпинделя,да и обороты великоваты!но
Два прохода- коронку приконьчил..
И только под один диаметр трубы..? Которых я в жизни не видел.. мне иногда за день приходится и с поручнями нержавейка 38мм и 50мм и велосипедную раму фэтбайка надо подсобрать..14мм и 18 и 25 бывает..
нужны в этой направляющей регулировки высоты центров под разные толщины труб..
Техничное исполнение.. один вопрос назрел ..- что это за чудоюдо-диск на болгарке..?! Е.бошит всё подряд и не уменьшается.. где купил?
Size of materials sir thank you
Sorry I'm not having design plan for this
First off how did you determine the hole saw was centered on your tube holder and #2 what are you going to do with the notched tube if you don't have a welder, glue or bolt it together?
Cool build I like it! But that music is terrible
Ok thank you bro
Functional. The speed is too high and you burn the cutter. An emulsion cooling system would be ideal. That cutter is burnt after 2 cuts...
How much ? Are selling that? ship to Toronto
Sorry I'm not selling it
The construction seems to use a lot of unnecessary drilling and tapping. 90 percent of those screws could be eliminated by tacking parts together.
Yes, however you obviously don't pay attention, like most. Video title DYI tube notched WITHOUT! welding. Imagine that!
Not so simple build! Can’t get lathe machine, hand tap and dies set, lack instructions for centering pipe clamps and centering drill! I will just stick to notching template and band saw
put a guard on that grinder, safety first
Thanks for your feedback bro
So... something that can be done with a drill press? Making a "DIY" drill press would get the same result and plus some more features...
So close! ALMOST a full build without a lathe. So close!
30 likes 180 visualicaciones 1 comentario a 30/4/2023
نحن لانريد فنيات نحن نريد قياسات
Nope.....Too much left / right drift the cut is cockeyed.....
2 tubes and the crown is dead, it seems bad work.
Poor blade lost its teeth and doesn't know where to go.
Really 10s of thousands of pounds of kit to make something I can buy for 100 pounds?
Идея хорошая... но дрель дерьмо, да и коронка тоже 🤢