Barry Lewis We offer the seat upholstery for the '04 Rams however we do not offer sewn door pieces. If you work with a local shop on installation we can send you raw materials that match our seat upholstery though. Feel free to call us at 1-866-639-7328 or email sales@leatherseats.com for more information.
David Dufresne Yes, once you re-connect the wiring and re-insert the locking indicator you will need to start by setting the panel into the door at the top and make sure that it is settled in all the way. Check the alignment of all the push clips along the sides and bottom and then pop them all back into place. Essentially, reverse the order of removing the panel at the beginning.
Kenneth Michael In this video we are using a Spotnail pneumatic upholstery stapler. There are a lot of other companies that produce good pneumatic upholstery stapler though. I'm not sure of the exact staple depth we used on this one but you should always check the size against how thick your plastic is so that you don't go all the way through. We generally start out with 1/8" and work up from there if we need more depth to bite into the plastic. If you have any further questions, please feel free to email us at sales@leatherseats.com.
Hi! Great video!! What size screws did you use for the door panel strip? Or do they come with the kit? Thanks
Superb 👌👌👌
Hello what is Phillips screw size thanks
It looks superb!! 👏👏👏👏 As always, top notch 👍👍😉😉
Delta Johnny Thanks!
Do a GMC Sierra 2014 up
excellent this tutorial !!! thank you !!
Tapizados Miguel You are welcome! Glad you like it!
I love to get my seats and door s ony Ram 2004 done
Barry Lewis We offer the seat upholstery for the '04 Rams however we do not offer sewn door pieces. If you work with a local shop on installation we can send you raw materials that match our seat upholstery though. Feel free to call us at 1-866-639-7328 or email sales@leatherseats.com for more information.
i have question en if you break the plastic tubs were you put the stinger screws how can you fix it or do you know if they sell replacement tubs
Do you have a shop near Savannah ga
Barry Lewis Please email our sales team at sales@leatherseats.com and they can see if we have a recommended installers in Savannah.
What type of grinder wheel did you use to remove the plastic welds? Nice upgrade!
GMOW Thanks! We just used a round stone grinder bit. Really any grinder bit should work to get the plastic welds/rivets.
Hello can you please tell me how did you reinstall the door panel ? By starting by the top and slide it ?
David Dufresne Yes, once you re-connect the wiring and re-insert the locking indicator you will need to start by setting the panel into the door at the top and make sure that it is settled in all the way. Check the alignment of all the push clips along the sides and bottom and then pop them all back into place. Essentially, reverse the order of removing the panel at the beginning.
LeatherSeats.com thank you very much !!!
LeatherSeats.com screw bolt size ??
What type of staple gun and staple size do you use?
Kenneth Michael In this video we are using a Spotnail pneumatic upholstery stapler. There are a lot of other companies that produce good pneumatic upholstery stapler though. I'm not sure of the exact staple depth we used on this one but you should always check the size against how thick your plastic is so that you don't go all the way through. We generally start out with 1/8" and work up from there if we need more depth to bite into the plastic. If you have any further questions, please feel free to email us at sales@leatherseats.com.
Sir I have 2019 tradesman
n 2500 truck. What do recommend to clean these door panels???to remove dust etc that gets on panels...
Steve Vail Please email sales@leatherseats.com or give us a call at 1-866-639-7328 and we can help you out.
احسنت جميل جيد جداً