Router Bits I use for Guitar Building | As requested by You
Вставка
- Опубліковано 16 жов 2020
- Well, you guys wanted more info on my router bits. This is for you. I gathered up my most used router bits for building guitars and we'll take a look at them. Then I'll use a few and make a duplicate of the template I made in last weeks video.
Making a custom router template video - • How to make custom siz...
Building an Acoustic Guitar Playlist - • I've been challenged t...
-- Affiliate Links to Products Used --
Infinity Flush Trim Bit 2" - amzn.to/2WeECxC
Amana Tools 3/8" Plunge Tip Bit - amzn.to/2IJQP6O
Amana 1/4" x 3/8" x 1/8" Bit - amzn.to/3k6fsbE
Freud 1/4" Downcut Bit - amzn.to/351zONa
-- Non Affiliate Links --
Infinity Mega Flush Trim Bits - www.infinitytools.com/mega-fl...
Radian 4 Flute Straight Bit - radiantools.com/collections/r...
Radian 3 Flute 1/4" Bit - radiantools.com/collections/r...
-- Visit My Website--
www.homebuiltworkshop.com/
-- Check Out My Handmade Guitars --
www.hayleyguitars.com/
-- Save 10% and get some awesome CA Glue from Starbond --
bit.ly/2WJmxbL
-- Ways To Support HBW --
www.homebuiltworkshop.com/sup...
-- My TeeSpring Store --
teespring.com/stores/home-bui...
-- My Amazon Affiliate Store for recommended products--
www.amazon.com/shop/homebuilt...
-- Join the HBW Built not Bought Facebook Group --
groups/homebuiltworkshop/
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
----- My Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
-- Join in on My Weekly Live Stream (events calendar) --
www.homebuiltworkshop.com/eve...
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#routerbits #guitarbuilding #homebuiltworkshop - Навчання та стиль
Thank you so much for showing that you dont have to have fancy tools to make a really nice and good qulity guitar.
Perfect timing Jeff, thanks! Just ordered a bit from Infinity.
Awesome. I like them. 👍
Thanks for the info Jeff! 😃👍🏻👊🏻
You betcha Fred. Thank you! 👍
I was gifted a router today so carving out the neck pocket and pickup cavities will be my next mission. Thanks for the tips. Outtakes at the end 😆
I also like Cheap chinese bits from temu for mdf templates - these are really cheap and you dont foul up your expensive bits with mdf gunk .... Plus you can keep using them even if they dull as mdf cuts quite easily and will never tear out like real wood
thanks Jeff!!! this is great!
Right on, I'm happy it was helpful.
Bravo as always 👍👍👍❤️
Thank you Giovanni! 🍦🍧🍨
Just what i needed. Thank you a lot
Awesome. I'm glad it was helpful. Thank you.
great info. my new self is building a project guitar!!
Sweet, Its going to be awesome.
I have a few of the Radians, I love 'em to bits.
Lol, I see what you did there.
Hi,
This is the 3rd video I watch from your channel, and I must say -> kudos to you, man ! ;)
Nice energy in the communication, and clarity.
And the subjects are pretty pertinent.
Simple, to the point, and not overly fancy.
I'm a total noob but I had been putting off getting hands-on-tools and DIY wood working for too long.
I wanna start with modding a couple of my guitars.
I was thinking of starting with a Dremmel as my main go-to tool, in order to :
. rout out pickup and pot cavities,
. cut new pickguards from whole sheets.
. polish the frets
I'm thinking I might be able to do that with the Dremmel and :
. multipurpose holder & drill press
. plunge router attachment
. flex shaft
What do you reckon ?
Thanks for the video(s)
Cheers from Portugal
Thank you for this video! It was very informative 👍
Glad it was helpful!
I just use a spiral carbide die cutter I got from work. It works beautifully for routing the pickup cavities, I have yet to try it for truss rod channels, because I usually do them by hand with a chisel and a dremel. I also got an MR0101 Miniature 5/16 Dia Rabbet with 3/16 Dia Ball Bearing x 1/2 x 1/4" that works in my trim router, I use it for routing my binding cavities. As for routing around templates, I prefer to do it by hand via a saw rasp, card scrapers, and an orbit sander. There's too much risk for tear out with a router.
Good vid, I have one of the Infinity bits, but rarely use it. I use the Mlcs shear angle and triple wing bits a lot. They last quite a long time,. Aldo Whiteside, Amana, and CMT
I really like these Infinitys. If I had a bigger router, I'd try their 1.5" flush trim bit. I dont know if mine has enough guts to do it. I was looking at some MLCS bits just a few days ago. May add them to the list to try.
@@homebuiltshop I have 10 routers😲. Truly the toll I am addicted to. I have 2 Ryobi 690's both over 20 years old, almost all plunge routers, Bosch, Triton, Trend, PC, .... lmfao I like the Infinity, but for the price I can buy 7 Mlcs shear angle, and I get 2 yrs out of those without rehoning the carbide,. But everything is about budget vs. use time.....once a poor kid always a poor kid🤣😂🤣
After just experiencing major tear out on a head stock I was making, I'm really wondering if a 3 or 4 flute template bit would have prevented it. Thanks for the video, keep them coming!
very likely that will help, or increase speed and lower feed
Nice. I also use a 9.5mm router bit for the backplate recess. This gives a nice rounded corner for the plate to fir into flush, but not too rounded to look silly . What size bit do you use for backplate recess ?
Damn Will Smith!!! First Chris and now you??? (Sorry for the awful joke, your a genius and i really admire you, you made me better at my job!!!)
I got the infinity mega flush. i already had the cmt 3/4 round over and a cmt 3/4 pattern bit two inches long..So I have 3 bits and spent all my money. Something tells me I better buy a cheap set and figure this mess out because 2 of these bits look like they do the same thing. I obviously have to find out what the bare essentials of having the bits needed for solid body guitar building are? I suppose the 3/4 amanna tripple blade is a must for pick ups and that 1/4 inch truss rod bit you use will be useful. Hopefully all i need for pick ups and Floyd rose. But after that I'm going cheap, until I learn more
What speed to you run the 2 inch infinity bit? Thanks awesome work!
I quit using routers making guitar bodies I still use them on pickup cavities I use a band saw to cut body shapes than a template on a 5 hp Delta Shaper with 1 inch pattern bit
Yes! I've wanted to use a shaper for a while I just don't have the space right now.
Thanks Jeff. I found this very informative. I NEED to find a router table to use along with a small trim router. I jumped the gun and bought a larger plunge router. ... can I use the plunge router in a router table ??
You might be able to. My larger router has a plunge and fixed base. The fixed base is what I keep mounted to my table. I'm happy it was helpful. 👍
@@homebuiltshop Ya I dont have a fixed base for it. I might throw it up for sale and get what I really need... and a router table that I can put on the bench. Thanks again. Talk to you next "youtube Wednesday".
Jeff is that infinity bit a 3/4' diameter and do you find it works well on body an necks , how bout flush trimming a fret board after glued to neck ??
It is the infinity 3/4". I feel it works awesome for any flush routing job on a guitar. Even flushing a fretboard to the neck. I just try to trim off as much excess as I can first.
Could I have those links
.
What do you use for bits --when you don't have a router?
I'd probably use a drill and a chisel.
can't find good 8mm shank router bits.... :(
Anyone got a TL;DR? Like a list of them? I don't have 20 minutes, please and thank you!
Rockler guarantees their bits and they will replace them if they are dull.
Is Woody Woodpecker a family member of you? 😉😇
"not sponsered" (please sponser me guys...(
No such thing as a hand made guitar anymore. 80% is done by a machine