CERAMICS AT HOME l How to make plates, two different ways I (bisque and glaze)
Вставка
- Опубліковано 22 тра 2021
- Materials:
-White low fire clay (1040°)
-White low fire glaze (1040°)
-Alkaline Flux
-Black pigment
-Slip
-Water
-Sponge
-Cardboard
-Sandpaper
-Masking paper tape
-Safety mask and glasses
-Wooden rolling pin
-6mm thick rods
-Rib
-Needle tool
-Cutter
-Rule
-Brushes
-Spatula
____
Music:
Floating by Smith The Mister smiththemister.bandcamp.com
Smith The Mister bit.ly/Smith-The-Mister-YT
Free Download / Stream: bit.ly/floating-smith-the-mister
Music promoted by Audio Library • Floating - Smith The M...
Underground Stars by Loxbeats spoti.fi/34tPBBO
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/underground-stars
Music promoted by Audio Library • Underground Stars - Lo...
Flowers by a[way] / awaylofi
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/Flowers-away
Music promoted by Audio Library • Flowers - a[way] (No C...
![굽이 높은 도자기 접시 만들기 : How make a ceramic Plates [ONDO STUDIO]](/img/n.gif)
Could you linked the clay website
Hi, I make my own clay. I'll be uploading videos of clay recipes soon ♥
@@UmiCeramics ceramic ki puri jankari den
@@UmiCeramics please we are waitinggggg. i also want to know.
@@UmiCeramics 🙄
@@UmiCeramics where is The link of your clay recipe ?
I purchased NerdEcrafter's kit & was having major buyer's remorse; as I'm strictly a watercolor girl. This is the perfect instructional video for my 1st steps into clay as I intend to make, a watercolor pallet. Thank you!
I love the 2nd bowl technique best but they were both great.Thank you for sharing your skills
Absolutely love this!
Such a beautiful, relaxing video, I would love to see you make that stoneware pot. Thank you.
Beautiful video. Love that ball tool used on the joint of the small plate. I do just want to point out for your safety, it is a health hazard to dry sand clay. Please look into “silica dust ceramics” or “pottery clay dust” and use your own discretion. You can alternatively sand the pieces in a bowl of water so that the silica (aka clay dust) is not airborne, and thus, not harmful. I hope this information lands with love. Take care.
Thank you! ♥ the ball tool is magical when it comes to making the joints!
I find your comment VERY important and it is always good to repeat it and emphasize it: breathing silica is highly dangerous, it can do a lot of damage to the eyes too. I personally prefer to wear a mask and safety glasses. It's also a good habit to always ventilate the space, keep the workshop clean, especially when you spend a lot of time there, and clean the aprons regularly as well.
Thank you for that tip. Was wondering how I could do just that without too much dust in my home. And clay dust in my lungs is not something I think is very healthy for you...:)
Wow, thank you! I was wondering about that. I just started in a beginner ceramics class and this wasn't mentioned at all.
🤍🤍
i received a starter pottery kit as a gift but i haven't used it yet because i wasnt sure how to create a smooth or clean finish without a wheel, and that's the look i'd like to achieve. thank you for sharing your techniques, i'll definitely be refering to this and the rest of your videos!
If you want a smooth surface, you should be careful about using a sponge on greenware (unfired clay) like she did w the first plate. Not saying it can't be done but you run the risk of creating a rough surface bc you can sponge away the smaller particles of clay, exposing grog (its like sand). She used sandpaper on bisque (once fired clay) thats probably the way to go IMO if smoothness is a concern. Opaque glazes can hide surface irregularities too if it happens
Beautiful...loved seeing the whole process
Thank you!!! ♥♥♥!
I love your videos! Thank you for them. Good work! Keep up!
I got a Amazon voucher for Christmas and ordered some air dry clay and tools! Today your channel was in my recommended and I can’t wait to watch more of your videos, it seems like such a nice process to make something with your hands.
Best Christmas present ever!
It's a beautiful process, full of rewards and learnings that go beyond ceramics itself! Enjoy creating beautiful pieces ♥
Will try this tomorrow Thanks for sharing ..
Great video !!! So relaxing to watch ☺
I admire the cleanliness of your work and workshop. I congratulate you for that.
Thank you! I think it's key to keep the space clean and tidy! things usually go wrong when it's messy
Great video Umi! And helpful too. Thanks
I have a water jug's design which I want to make using ceramics but it does not have regular crossection. Would it be a possible choice for making?
Thank you in anticipation.
Such a beautiful process. I hope to become this skilled one day. Thanks for this video! I learned a lot 💛
Thank you!! I am very flattered! ♥♥♥
Breathe air in. (God created all things. His son, Jesus, died to forgive us of all wrong doing via his unbreakable red blood. He rose to life 3 days later.)
Beautiful process u have made mam🤗. I love it
This helped me so much!!! Thank you, Love from Brazil 💚💚💚
I'm very happy that it was helpful!!
Video bellissimo. Complimenti, sei bravissima non solo per la tua tecnica ma anche per il tuo estro creativo. Complimenti anche al tuo staff. Bravi
This is very true!We are going to do a ceramic plate which we have done already also you can add a little little bit of water at the the start also dont throw that ceramic line away! you can make decorations with it our ceramic plate is in the oven.Also our art teacher explained that you need to put that plate in the oven for atleast 2 days i think so.
Clay throwing is definitely not for me, but this I can try. Thanks a lot for sharing.
Complimentoni, molto brava 👏👏
Amazing ❤
An explanation of what you’re doing and why as you go along would be very helpful
Excellent
Thank you❤
thank you!
Really well done😍
Thank you!! ♥!
Thanks for this Amazing Video:). Pls show us how to make base for plant pots:).
Hi! Love your videos! I would recommend purchasing wax resistant and brushing it on the bottom of your pieces as it will save you some time. Tape is a great idea if you don't have access to wax resistant but if you do or can get it, its fairly affordable and a time saver.
Hi there! Thanks!! ♥
Yes! Definitely wax resistant is a great option!
I try to make the videos using things that everyone can find at home, such as cardboard, paper tape, scissors, and make the process as simple as possible. I remember when I was just starting to make pottery and how difficult it was for me to get all the materials and tools!
@@UmiCeramics Definitely! Pottery is an expensive hobby so I totally understand. Thanks for sharing that tip!
Que hermoso! Lastima que no tengo el horno. Se podrá hacer de la arcilla que seca sola o con arcilla polimerica? amo las uñas en composé
Hi I'm from India... I'm so excited to see ur videos for making ceramics things.. Im so impressed and l would like to do like this at home can u share the bisque firing details like machine cost and all.. Im waiting to. Start as soon as possible.. Thanks a lot...
I love your pottery videos just want to know if these need firing? Or I can use sir dry clay?
Hola Mariiiiiiiii, super prolija como siempre ❤️
Me encantó el video. Una pregunta, aprox qué diámetro tienen los círculos de cartón? Asi intento hacer unos jiji
Besitossss
Hi, just wondering if you are using fabric on your work surface? If so what type do you recommend?
hu umi ceramics ☺️
today you inspired me for a new hobby thank you!
btw: what is that liquid you’re using at the end (9:45 minutes) is this glaze if yes are you doing it homemade or is it store bought? do you have a recipe?
What kiln do you use? Do you have any tips for first time Kiln buyers? Thank you! And I love the shape of your dishes! (:
Lovely! What type of clay are you using? What is the brand if you do not mind sharing. Thanks!
it's amazing ❤️
What type of clay is used???
Great video as always. The music is on the annoying side, but the video is very informative. Thank you!!
It's so beautiful but it also seems like a long and meticulous process...how much it takes for you to complete a batch of dinnerware? Is there a faster way to create small plates/trinket dishes? I would love to start making my own ceramics 😍
Yes, be highly skilled and throw them on a wheel: ua-cam.com/video/QSRQUwCuj-w/v-deo.html
Or have a team of people, some expensive equipment and some rather handy-dandy moulds: ua-cam.com/video/H1QYeuy3buE/v-deo.html
Ceramics are an _art_ - they're not something you 'churn out'. The video here isn't even a particularly meticulous process - it's quite basic, really - hence the 'at home' tag. If it's just some plates for you, what's the rush, anyway?! Why not take your time and actually _enjoy_ the process...
If you just want to make 'quick' trinket dishes for a quick profit, then I suggest you take a look at Jesmonite, which you can pour into moulds - a bit like resin, except it's opaque like plaster or clay.
Would it be possible to share where did you by the tools? I couldnt find stores that sell 2 long wooden stick that you used on this video
Wooooow
merci pour cette belle démonstration .et surtout merci pour l'absence de pub..
Hi! How do you make glaze? Or do you just buy glaze?
What if i do not have the bisque firing? Is there any alternative?
Hi, the bisque firing is neccesary. There is a type of clay called "polymer clay" that can be "fired" in a regular kitchen oven, but the plates won't be food safe!
@@UmiCeramics I was thought at a ceramic class that you could skip bisque and do the single firing for a specific type of clay only tho
@@laurannamaresca7369
Hi, yes, there is a technique called "single firing", you can fire bisque and glaze at the same time, It is possible, although it can be quite tricky! In my personal opinion it is an interesting option when it comes to making small decorations on some pieces
Lindo ❤
do you sand before or after bisque firing it
qué tipo de tela usas de base para realizar las ceramicas?
Lindo! Qual e o nome dessa tinta em pó?
Me encanta la simplicidad de estos platos, gracias. Quisiera saber cómo se llama la cinta adhesive que le pusiste para que no se pegue el plato en la base del kiln.
Hola! es cinta de papel, es para evitar que el esmalte se adhiera a las bases de los platos durante la inmersión y hay que sacarla antes de hornearlos
Instead of alkaline flux, can u use underglaze?
Hello, I am trying to learn about pottery and I wanted wanted to ask about the pigment and alkaline flux you used. Can you link where you bought it? I was also wondering if you can use acrylic paint and how to use it in ceramics. Thank you!
Hi! I bought them at "Crecer Poles & Cia". You can use acrylics to paint the ceramic bisque, but you can't glaze it after that, and will not be food safe, for decorative purposes only!
Hi. Nice work.. but what was the liquid u used
Would you please support with audio explanation in English.Jus lov the way of making so nice plates
What kind of underlaying do you use ?
11:35 do you put it on the oven afterwards ?? For the color to impregnate and you can eat or drink in it?
Is the black paint food safe?
❤️❤️❤️
Do you fire your pottery???
Amazing 😍
Can you please tell me the brand of pottery kiln?
Thank you!! I use a "Simcic" brand kiln
one week for let them dry? nice!
It is better to put clay to dry itself for one week or to set it on temperature of 150°C? Great video btw🥰
Hi, in my experience the slower the drying, the better. You can speed up the drying process when there is very little moisture left
Podrías decirme que arcilla usas por favor?
😮❤
Que clase de masa es, ingredientes para hacerla y el baño cubrieron como se hace ? Gracias
Is it necessary to dry it in a machine . Or it will dry by its own like . Without any drying machine can it be dry?
What’s in the bucket? TY
Do I need to have the fire thing or I can bake it
Hola Mari❤ me podrías decir cuanto tiempo de cocción y a que temperatura cocinar estas piezas ? Se puede cocer en el horno de casa ?
Hola! Este tipo de arcilla en particular solo puede cocerse en un horno para cerámica, debe alcanzar los 1040° de temperatura y la duración de la horneada ronda las 7 horas. Hay muchos talleres y personas que ofrecen servicio de horneada, vos llevas las piezas y ellos se ocupan de cocerlas.
También existen otros tipos de arcillas que se secan al aire o en un horno de casa. Pero sus usos son diferentes y en general no son recomendadas para utilitarios. Espero que mi respuesta te sea de ayuda!
Hola!! Las varillas de que medidas son y que tela usas para apoyar?
Great 👍🏻 I have questions what’s the liquid in 3:39 ?
Hi! it's called slip, and it's clay+water
How to make it: ua-cam.com/video/jroJIOv7kuU/v-deo.html
Hi how do you back off it?
Can I get the water percentage to make the plastic form of clay.
Holaaa! me gustaría saber como se llama la tela que está sobre la mesa. Porfavor y muchas gracias. Buen video!
Hola, es lienzo, cuanto mas fino mejor, para que no deje mucha textura en la arcilla
Can this be done using air dry clay? I'm thinking that it can. Hmmm....
😍👌
Hey! Which clay should I use , so that it can be food safe ?
I think polymer clay is not safe and all clays are good for food storage
I just try it and its works😅
We don't need dryer?
Which clay is it?
Bu kütleye ne denir? Fırına mı girmesi gerekiyor? teşekkürler
Beautiful videos - my 2 cents, music is really good but we could appreciate the ASMR kind of ceramic videos, hearing the pots taken out, kept in etc. Like the last part, when the plate is ready, tbh i cant tell the difference on camera if its a ceramic or not. And why dont we try to speak alittle to camera, it really builds a community around this. I love your videos, these are a few something that i found missing in your video compared to others here on youtube.
Hola quiero saber si no se quiebra fácil ? Si es duradero el material ?.....perdón no se de este arte .
Can i use pottery clay without firing?just let them air dry.make some craft
how can i find out the type of color that you must be used and suitable for eating
and what is best type
Did you paint it with white or what is this?
do we need to fire this thing
Did you use the pigment over the white glaze. Is it just one coat of the pigment ? Where can one get the pigments and alkaline flux? I am new to pottery. I have tried underglazes but not very happy with it. I like the painting over the glaze method.
Hi! exactly! I applied a very thin layer of pigment+alkaline flux on the white glaze. You can also paint on the "base glaze" using another glaze of a different colour. And there is a third option: a technique called "third fire", it consists in painting on the glaze (already fired) using a product called "overglaze", it requires a third firing but the result is beautiful as it allows painting with great detail.
I think you can get these materials in any ceramics store. Always make sure that the flux is "alkaline", since it doesn't give off toxicity!
I hope my answer can help you! Don't hesitate to ask me any questions
Hi! Did you use pigment? Gracias!!!
Hola! Usé pigmento negro puro mezclado con fundente alcalino, 50% de cada uno!
@@UmiCeramics muchas gracias! saludos
Hi,I’m new to your page and I’m very interested but can you dry it without the oven.
Hi! for this type of clay you need a high temperature kiln
Hola! Que es lo que utiliza en el minuto 9:30 y para que es?
Why do we not glaze the top rim and base generally?? What happens if we do.
Hi, it's important not to glaze the base because otherwise the pieces would stick to the kiln shelves during the firing. With respect to the top rim... I think it's just an aesthetic choice not to do it
Hola el liquido que le hechas a cada pieza ( cuando lo remojas por ejemplo) como se llama y para que sirve
Gracias
Hola, es esmalte, durante el horneado se funde por la alta temperatura y el resultado es esa capa vidriada impermeabilizante
What is the liquid glaze?
Which is the raw material for those dishes?
Is that a pottery or ceramic?
Can we also use acrylic paint
Hi! You can use acrylic paint but they will no longer be food safe
What is the name of the liquid after firing them
WhAt is the “glazing”??❤
Wax ?