My own encoder became really stiff after not using the mouse for a long time. I opened the mouse, cleaned it, even sprayed the encoder with silicone lubricant; didn't work. Is there a way to disassemble the encoder itself?
I dissasembled this mouse and tried to replace encoder, but when i inserted a new one it worked for a minute, then it stopped working. After trying to reinstall it some solder came off, the one that was on the holes where encoder used to be stuck in the circuit (The holes in the middle-bottom, right side on 5:44). Now i just can't solder the encoder to the board. Can you advice anything for such problem?
When you insert a new one, the printed line might broke. After remove it again, you totally broke the pad. You can use some quick adhesive to put it back, for permanent solution use uv curing solder mask.
@@progressivediy9677 The soldering that was on the circuit holes just melted into the other solder, can't put it back in now. How do i use that "UV curing solder mask"? Do i have to just put it on the circuit board and then weld encoder back in or is it some other way around?
@@Mad_Dog_of_the_Regime i mean, you just ripped of the pad on pcb, thats why you can't solder the encoder leg to the pcb, right? So you need to put back the ripped pad on its place, and jumper to the circuit using thin wire. Search for some video on yt about how to repair pcb pad.
@@progressivediy9677 I hate to bother you too much, but can i ask you to recommend any specific videos that show restorations of connections? I think i got the wells gone as well.
spill ukuran obeng nya bang
bro g102 scroll wheel up and down move fixed .. tell me ?
@@shanksshaki tell u what bro? u say "fixed"...so i think no more problem lol
My own encoder became really stiff after not using the mouse for a long time. I opened the mouse, cleaned it, even sprayed the encoder with silicone lubricant; didn't work.
Is there a way to disassemble the encoder itself?
yes you can, see this video on how to tear it ua-cam.com/video/Kmyn5kEZ0Ig/v-deo.html
untuk ganti kabel rubber ke paracord bisa ga ya untuk g102?
Bisa, tinggal diganti aj
Mouse nya beli dimana ya bang ?
bang, cara cek mouse encodernya rusak bagaimana?
simpelnya buka halaman yutub, coba scroll halamannya atas bawah, klo naik turunnya ngadat brarti encodernya udah rusak.
@@progressivediy9677kalo scroll up down ejleg jg berarti encodernya ya bang?
bang ,,,, tu cairan aapa ente olesin ??
Flux/Pasta solder
@@progressivediy9677 aku jg punya tp kental bnget bang sama atau beda?
size 10mm ya bang?
Iya encoder 10mm
@@progressivediy9677 itu TTC white gimana feelnya mas dibanding bawaannya ? mau ganti yg agak berat + tactile
@@nadzifaashiqa5273 klo nyari berat dan tactile cocok pake ttc white, biar umur lebih panjang pake yg gold
@@progressivediy9677 kalo yang ttc silver gimana mas?
@@nadzifaashiqa5273 ga ad ttc silver..white ama gold itu feelnya sama...gold lebih unggul di lifetimenya..begitu kira2 menurut klaim dari TTC nya.
I dissasembled this mouse and tried to replace encoder, but when i inserted a new one it worked for a minute, then it stopped working. After trying to reinstall it some solder came off, the one that was on the holes where encoder used to be stuck in the circuit (The holes in the middle-bottom, right side on 5:44). Now i just can't solder the encoder to the board. Can you advice anything for such problem?
When you insert a new one, the printed line might broke. After remove it again, you totally broke the pad. You can use some quick adhesive to put it back, for permanent solution use uv curing solder mask.
@@progressivediy9677 The soldering that was on the circuit holes just melted into the other solder, can't put it back in now.
How do i use that "UV curing solder mask"? Do i have to just put it on the circuit board and then weld encoder back in or is it some other way around?
@@Mad_Dog_of_the_Regime i mean, you just ripped of the pad on pcb, thats why you can't solder the encoder leg to the pcb, right? So you need to put back the ripped pad on its place, and jumper to the circuit using thin wire. Search for some video on yt about how to repair pcb pad.
@@progressivediy9677 I see, i have no idea how to do any of that, sadly. Anyway, thank you for helping.
@@progressivediy9677 I hate to bother you too much, but can i ask you to recommend any specific videos that show restorations of connections? I think i got the wells gone as well.
bang tanpa disolder apakah bisa bang, soale cuma ganti itu scroll encodernya
Ga bisa, semuanya solderan 🥱
obeng nya ukuran berpa bang?
Sy pakai 3mm tpi yg lancip, amannya pake yg 2mm pasti pas
What is it that you putting on the circuit on 6:08?
Soldering flux