Watch Door Armor CEO Alan Young perform installation in under 5 mins.
Вставка
- Опубліковано 14 чер 2017
- When we say installation is quick and easy that is really what we mean. Take 5 mins to check out the video and learn how easy it is to install Door Armor.
- Навчання та стиль
Pretty sweet video that shows you how to only do half the job
IK, R! 🤣
I install doors everyday, contract with Lowe’s. Just a pro tip, pre drill all your holes, the reason is if you don’t you risk cracking or splitting your jamb. This is a great kit btw and it really works. Other than that everything’s perfect.
To bad the install vid sucks
I will try that I was unable to screw in door shields. They still haven’t updated their instructions which needs improvement!
@@More_Than_Conquerors agreed, really sucks it’s not a clear cut clean install, they don’t mention the armour makes everything too thick and will cause scrubbing, it takes some work and every install is different based on reveal and door jamb. It’s kinda one of those figure it out kinda deals lol.
@paidinfull5950 so the 2 quarter rule doesn't work ?
What about the other side, the long strike plate ?
He skipped that part
what happened to the part where you install the jamb shield?
Why is the door jamb part is not installed and still on the floor?
Exactly....
While your video demonstrates installation you have the neccessary clearance but you don't cover what to do if you don't have the clearance. What is the best way to create the neccessary clearance?
Trim the door
I guess the door wouldn't close with the strike plates on the door frame so you left them off. Could you explain?
What about the long part that you put on where the steike plates go? Didnt even show that ...
Great product. Simple and effective. It’s changed since I bought and installed about 11 or 12 years ago at my last home. Install was easier and its just as secure. Kicking myself for waiting 3 years to install at my current home. The door side lock re-enforcement didn’t quite fit but I have metal doors so that doesn’t concern me. The jamb and hinges are the weaker points at my home. With the post-pandemic global economy what it is, crime will definitely go up. Thinking about it? Get it.
I just purchased and install my door armour I FEEL 120% better I'm not rich but the little values I have I want them to stay in my apartment
Hello I know this was 3 years ago but I wanted to know how was you able to pull that off because I want one for my apt but I know the manager will say no
What is a good drill?
Can we how the long strike plate side goes on?
Can u slow down instead of blowing through it so fast and just jump cutting to stuff thats pre finished? I want to see a proper step by step process that shows everything without steps being left out
It only takes about another minute to pre drill the holes so you don’t split the door frame or drive the screws in crooked.
What is suggested way to increase the space available to the two quarter width?
The only weak point is the back of the door where the hinge is, with the tiny screws that holds it together. I bought one big long stainless plate that goes down the whole door.
Awesome Product! Thank You 🙏
I have an out swing double door in back. Is there any protection for that? Also one door has masonry jams do you have mason screws???
Great product!
I just ordered 2 sets and did not look to see if two quarters fit so what do I do now? How do I widen the gap between door and jam. I cannot plane the door btw its a resin door. Thank you in advance.
How good are mini door shields? They don't apply any force to holding the door together and seeing as the screws are in the front any force applied is to the sides I would think they would bend if enough force is used I don't understand the physics of how that works
Thanks for the video, just installed it and will definitely sleep better at night.
Took me maybe 10 minutes and the front door now feels like the door of a bank vault!
GENIUS PRODUCT!!!
It doesn't look like the door jamb reinforcement is installed. At the end when he closes the door it looks really tight as is so I'm wondering if the door jamb part can be installed and the door still close?
That is because the individual that filmed this somehow lost the clip of me installing the Jamb Shield. It is definitely installed on this door and the door closes. The caveat is that you must have enough clearance to fit 2 quarters between the Jamb and the door. Otherwise, you should use our PRO Door Armor, which has a different door shield.
@@alanyoung1478 Thanks for the reply. I have 2 quarters gap so I ordered your kit through Amazon.
Where can I buy this?
Can't even fit one quarter in my door. So I'm left with zero options?
We recommend our Max Pro kits, they eliminate clearance issues. Here's a helpful article: armorconcepts.reamaze.com/articles/my-door-is-too-tight-door-armor-wont-fit
I don’t think they realize how hard it is to see exactly what they’re doing in some instances. Need a better shot or close up, clearer details for us novices. I really need a it broken down. (I got 3 max kits unable to install)
Hmm two quarters total of
Just on each side?
2 quarters of clearance between your door and the door frame. However, the only area where the 2 quarters is important is the area where the lock goes into the door frame. 1 quarter of clearance everywhere else is fine.
I suggest just buying long screws to replace the short ones, once installing all this bracket, door will be hard to closed or open
Don't use the hex screws that come with it. They strip out quick. Go buy the phillips screws at lows and save yourselves a headache. Other than that, great product! 😊
it sure would be nice if you guys make a decent video for installing it for double doors from start to finish, instead of these pieces of video, i order this kit several months ago and it still sitting in my kitchen. PLEASE DO IT RIGHT.
Did it not come with instructions? There are a lot of videos on YT with better installation instructions. It isn’t that difficult to install. What door reinforcer did you purchase?
@@smileywarrior1870
alot of dyi install vids on youtube are piss poor imo..they always blow through stuff at light speed, leave steps out, and dint use close ups so u can see what is going on
The instructions are not the greatest and missing important information. I watched several videos. They should warn people to not only check for clearance, but if your door trim can be removed. obviously my new drill isn’t good enough which is why I couldn’t screw in the door shields I’ll try pre-drilling which they need to suggest. I just heard him say to use a tap drill but I’m not paying $400 for a drill.
You just unscrewed your entire door from frame! Can't it go out of alignment?
Can't they just go through a window?
MY GOD. You are BRILLIANT! They can also cut a hole in the wall or roof (Tom Cruise). They could come down the chimney (Santa). However, the first thing that every thief tries is the door, which is why 85% of break-ins are through a door. Windows, believe it or not, are more difficult and they make noise. Glass breaking is much different than someone kicking in a door, which sounds like a car door closing. Anyway, just leave your door unlocked and see if they go through your window. If you don't reinforce your doors (with this or something else) you might as well just leave them open. It takes less than 10 seconds to kick in most doors. You could die if you fasten your seatbelt but it's still a pretty good idea. Even with an airbag.
@@alanyoung1478 That’s actually quite funny. Good response. Wish your customer service would respond. All I want to do is to be able to install the three door armor max kits I purchased, but I’m waiting for your customer service to return my phone call or my email! Incidentally, I also bought security film for my windows in my new home.
Completely skipped a piece.
your a big dude , you look like door armor lol
Well executed product. Poorly executed video. No ViDeO for CEO! 🤣
He will hear😂
Can't see, amateur video and sitting here with 2 sets. Thanks for nothing
All these door products are a joke! What good is a reinforced door with a glass window right beside it? Get a pit or Rottweiler and a sawed off shotgun!
Exactly. Leave the door unlocked genius! Don't bother fastening that seatbelt either Einstein. And good luck to your dog if the intruder has A gun. Been doing this since 2004 Rambo.
@@armorconceptsdoorarmor263 idiot! You must be a liberal!
Great comeback! I'm a black entrepreneur. Both parties suck for me. Just saying.
@ Cory Boyd it takes just a split second to kick in most doors, I’d like more time to get my gun. That’s if I’m home, but when I’m not home, my dog is not my first line of defense. Personally, I think it’s worth it to reinforce your entry points. the standard screws and hardware in common doors are lacking. Make somebody work for it to break in maybe they’ll move on that’s why I bought security film from my windows. Do you know how many people come home to find their front doors been kicked open? Don’t you think that they’re gonna do something a little different when they fix it?