This anti drop sensor thing is absolutely ridiculous - it's made our vacuum almost totally unusable unusable at 4 months old. And we only have very short knap carpet in our home. When we receive the message there is NEVER ANYTHING ON THEM. I am definitely going to be trying the tape! Thank you for sharing!
So by putting the tape you solved issue of it saying clean antidrop sensors ? I cleaned mine many times but still says please clean and won’t work. Please let me know if this would fix it
Hmm, the white tape shputl reflect the ir ray. It works well on mine, but i don't know if there is a setting that can be changed.. please let me know it there is 😊 Good luck
@@plaxen8458 yeah I just bought the type and put it over every sensor I saw and it still says clean anti fall sensors unless I put it on the charger myself, then put start it says starting cleaning and after like five seconds it says clean sensors
@@bobgomez1404 I experienced this same exact issue with using white electrical tape on my T30s. After trying different tapes, I found that the blue painters tape worked the best for my robot vacuum. Clean the sensors first and then try blue painters tape to see if that helps.
it wont work on sensor needs cleaning fault, and dont use this tip if you have a robot hoover near stairs as it will most likely fall down the stairs and injure someone,
This anti drop sensor thing is absolutely ridiculous - it's made our vacuum almost totally unusable unusable at 4 months old. And we only have very short knap carpet in our home. When we receive the message there is NEVER ANYTHING ON THEM. I am definitely going to be trying the tape!
Thank you for sharing!
Your welcome, i hope it works for you also. Not had a problem since I did this 😊
Let me know!
So by putting the tape you solved issue of it saying clean antidrop sensors ? I cleaned mine many times but still says please clean and won’t work. Please let me know if this would fix it
Yes. I used white electric tape.. worked perfect on mine 🤗 hope this helps. Let me know 👍
This does not work on mine went and bought white electrical tape or can I change setting since I don’t have stairs only 1 floor home
Hmm, the white tape shputl reflect the ir ray. It works well on mine, but i don't know if there is a setting that can be changed.. please let me know it there is 😊 Good luck
@@plaxen8458 yeah I just bought the type and put it over every sensor I saw and it still says clean anti fall sensors unless I put it on the charger myself, then put start it says starting cleaning and after like five seconds it says clean sensors
@@bobgomez1404 I experienced this same exact issue with using white electrical tape on my T30s. After trying different tapes, I found that the blue painters tape worked the best for my robot vacuum. Clean the sensors first and then try blue painters tape to see if that helps.
@@darrylpolite8722 oh ok thanks for letting me know on the blue tape am try out it was about to throw away
سوف تسقط المكنسة في السلم لعدم وجود استشعار، عليك التأكد من ذلك.
Thank you for the tips. I might have forgotten to say this in the video. The trick is only for 1 floor living 🙂👍
it wont work on sensor needs cleaning fault, and dont use this tip if you have a robot hoover near stairs as it will most likely fall down the stairs and injure someone,
That's strange, it works perfectly on mine. I used white tape, I read somewhere that it reflected the IR better. Hope it works out on yours👍😊
I tried and It did not work
That's sad, works perfect on mine. So I can finally have it on the carpets without stopping..
If your bot is working on any floor other than the ground floor, be careful since it might dive off from the first floor if these sensors are blocked
Correct 💯