Thanks. I’m using this machine for a long long time, it’s still running very good. I only have problem when I thread. Today I find it out on my phone, thank you so much. 👍😅
i want to thank you very very much for this,,,,i have had this machine for about 5 years, and i fight with it on the threading of it,,,,but with your help i have been able to thread it. it takes me hours upon hours of trying to thread this machine. thank you again.
@@user-nz3sg5kb9d к сожалению его сняли с производства!!!! Машина классная, разобраться легко! Всё написано на табло, все регулировки, на 6 видов тканей.Простая, надёжная, меня ни разу не подвела! Я очень, очень, очень много шью! Километры- это реальность, а не приувеличение! Незаслуженно сняли с производства!
Just watched the coverstitch conversion section. After 5 hours of trying to get my machine to sew correctly I found out the lower looper threading in the video is wrong!
This video has been terrific, up until I tried to sew the cover stitch wide. I threaded it according to the video. Each time I started to stitch the first 2 or 3 stitches the video says to stop and clip the threads behind the needles. I have done this, then rethreaded cut just the needle threads, still not successful. Then cut the right needle a thread always broke. The comment above stated the lower looper was threaded wrong in the video. What is the correct way to thread the lower looper? I have tried to study the diagram in the owners manual, very hard to read. Any suggestions would be appreciated.
@@anitat6393 at 43:55 it says to follow the purple dots thru this area. Do not place the thread over the second dot (the one on the left) only place in the first purple dot that also has a pink dot from here go up to the loopers as the purple dots show. Hope this is clear.
Thank you for answering my question. I rethreaded the lower looper, but it was correct from your description. The upper looper threaded through the needle keeps breaking. Thank you for your suggestion.
I use this machine every time I sew. I have an old Brother my mom left me and a Singer. I like to have a dark and a light threaded machine. The brother is great, but I really don’t care for the Singer. Now that’s the one that I can’t figure out, just to do a regular overlock. My Huskylock 936 must of had a power serge, because my sewing advisor just has lines going across it. 😩. It’s still does the overlock. Just have to touch the “A” auto button, to make it work. It has such a great looking stitch. I wish I could find a replacement for that Sewing Advisor. If anyone knows where I could get one plz let me know. It’s my favorite.
Мне машина очень понравилась, я поменяла перед этой несколько других моделей. Слабые нити машина действительно рвёт. Я взяла Poliester, шьёт чудесно! При необходимости могу взять верхние нити из хлопка, но нижняя - всегда Poliester. Кроме этого, натяжение нижней нити делаю слабее, чем предлагает программа.
still having a problem with left needle threading and being caught and used. It just doesn't catch or stitch. Just flows through without doing anything. What am I doing wrong? ALSO, which place should the left needle be in, A ? The tiny screw fell out and I had to borrow from E....GAH!
I purchased this machine used about a month ago. It is like brand new. Is there any way that I can get the accessory compartment and the accessories? This was not with my serger. Also, how do I go about getting the necessary pieces to add the 5th spool and thread? Thank you.
Has anyone successfully cover stitched fleece, I can not get this machine to do fleece cover stitch it dropping the stitches in the back side, I can do it on flannel but not fleece, any help out there?????
I'm grasping at straws here. I purchased a Designer Diamond. The thread broke constantly. It was in for service 4 times in 8 months and they couldn't find any reason for the thread to break. Of course, it must have been my fault. Long story short, I traded that machine in and paid the difference for a Designer Diamond Deluxe (both machines were refurbished; also, I purchased them at Husqvarna dealers in Joann Fabrics). I've had the "new" machine for one week and the thread breaks EVERY time I embroider. Multiple times. I talked to the Manager who has been great, and she told me to bring it in with everything I use with it, i.e., stabilizer, thread, interfacing, fabric, needles, designs, etc. She and her assistant sat with me for 2 hours and the thread broke and shredded continuously. So they recommended that I use different stabilizer, interfacing and Insigna titanium embroidery needles, all of which I purchased. I took the machine home and it broke and shredded the thread the same as before. Do you have any suggestions? I'm tearing my hair out and am beginning to wonder if Husqvarna Viking is top of the line after all.
***** What kind of thread are you using? Are you using the thread holder and what size of spool? I have found that if on the bigger spools I place them in the front make the thread go over the extra spool holder under the 1st spool holder and then thread the machine. What size and kind of needle are you using? And always set the machine on the slowest speed setting that helps too. Just a few things to try. I love mine D-1. Carol N TX
Thank you Carol. I sat with the department manager at the store where I bought my embroidery machine today. I'll have to experiment more, but with a combination of things and a jeans needle, my machine worked beautifully. Thanks for your response.
Thanks. I’m using this machine for a long long time, it’s still running very good. I only have problem when I thread. Today I find it out on my phone, thank you so much. 👍😅
i want to thank you very very much for this,,,,i have had this machine for about 5 years, and i fight with it on the threading of it,,,,but with your help i have been able to thread it. it takes me hours upon hours of trying to thread this machine. thank you again.
Timestamps:
1:23 Setup and overview
8:11 4-thread overlock (includes threading)
18:54 Securing seams
20:10 stitch length and differential feed
21:27 gathering
23:04 3 thread overlock (needle config change)
25:50 Decorative & specialty threads
27:17 Flat-lock stitch
30:20 Rolled edge (+ threading conversion)
33:08 Pintucks
34:07 5-thread overlock (+ rethreading)
39:44 Coverstitch
48:46 tri-coverstitch
50:53 2 thread chain stitch
54:09 blanket stitch
OMG x 2 I have had this machine in the closet for about 5 yrs. Was stressed thinking about threading it. Found this, it saved me. Thank You, Thank you
Me too
I've worked all afternoon trying to retread mine.
OMG!!! I learn a lot about my serger. It has be sitting in the trolley for over two years. I made a outfit and planning to make more.
Thank you
You save my life. I have a headache trying to thread this machine and with your video it was so easy. Thanks again
Praise God!! Just recently purchased this very model from a sweet little lady and would've NEVER gotten it threaded ... Thank Yah!!
Excellent video for threading the 936. Much better than the one included with the machine. Thank you for taking the time to do this.
Thank you so much. I bought this machine a year ago and struggled so much to thread it until I watched this video.
This is everything - I haven’t been using my serger to it’s fullest. Thank you for uploading this!
just got a Huskylock 936 from a thrift store, looks new and this will help me a lot...
This video is excellent. So glad I found it. Thank you.
Thank you, now have it retreaded! Only have to do it after several years and always forget how. Much appreciated.
Million thanks for this video! Very helpful. Please make a video about oiling the machine
Thank you so much! I finally was able to thread this thing! Can't wait to finish my clothing off with beautiful overlock seams!
Great video of the capability of this machine.
So much better than the book.thank you
Thank you for this guide it is really helpful!
Excellent....thanks so much!!!
Thanks a million! Great video 👍
Классная машина! Я много километров на ней прошила! Очень рада, что купила её!
Стоит покупать, а разобраться легко?
@@user-nz3sg5kb9d к сожалению его сняли с производства!!!!
Машина классная, разобраться легко! Всё написано на табло, все регулировки, на 6 видов тканей.Простая, надёжная, меня ни разу не подвела! Я очень, очень, очень много шью! Километры- это реальность, а не приувеличение! Незаслуженно сняли с производства!
I’ve had mine since first came out. It’s a great machine.
Thanks soooo much
excellent
Just watched the coverstitch conversion section. After 5 hours of trying to get my machine to sew correctly I found out the lower looper threading in the video is wrong!
This video has been terrific, up until I tried to sew the cover stitch wide. I threaded it according to the video. Each time I started to stitch the first 2 or 3 stitches the video says to stop and clip the threads behind the needles. I have done this, then rethreaded cut just the needle threads, still not successful. Then cut the right needle a thread always broke. The comment above stated the lower looper was threaded wrong in the video. What is the correct way to thread the lower looper? I have tried to study the diagram in the owners manual, very hard to read. Any suggestions would be appreciated.
@@anitat6393 at 43:55 it says to follow the purple dots thru this area. Do not place the thread over the second dot (the one on the left) only place in the first purple dot that also has a pink dot from here go up to the loopers as the purple dots show. Hope this is clear.
Thank you for answering my question. I rethreaded the lower looper, but it was correct from your description. The upper looper threaded through the needle keeps breaking. Thank you for your suggestion.
I use this machine every time I sew. I have an old Brother my mom left me and a Singer. I like to have a dark and a light threaded machine. The brother is great, but I really don’t care for the Singer. Now that’s the one that I can’t figure out, just to do a regular overlock. My Huskylock 936 must of had a power serge, because my sewing advisor just has lines going across it. 😩. It’s still does the overlock. Just have to touch the “A” auto button, to make it work. It has such a great looking stitch. I wish I could find a replacement for that Sewing Advisor. If anyone knows where I could get one plz let me know. It’s my favorite.
Мне машина очень понравилась, я поменяла перед этой несколько других моделей. Слабые нити машина действительно рвёт. Я взяла Poliester, шьёт чудесно! При необходимости могу взять верхние нити из хлопка, но нижняя - всегда Poliester. Кроме этого, натяжение нижней нити делаю слабее, чем предлагает программа.
Thanks for this video. I moved and can't locate my manual.... was able to download the .pdf file online, but my video is VHS!
I'm having trouble replacing 1st needle. Left hand one.
How do I change the needle? Thank you for helping
Was hoping to find the threading for 2 and 3 thread rolled hem... Not well covered
Is there a special tool to change needles C & D?
I need to learn how to change needles in the Huskyvera serger 930
still having a problem with left needle threading and being caught and used. It just doesn't catch or stitch. Just flows through without doing anything. What am I doing wrong? ALSO, which place should the left needle be in, A ? The tiny screw fell out and I had to borrow from E....GAH!
I purchased this machine used about a month ago. It is like brand new. Is there any way that I can get the accessory compartment and the accessories? This was not with my serger. Also, how do I go about getting the necessary pieces to add the 5th spool and thread? Thank you.
Has anyone successfully cover stitched fleece, I can not get this machine to do fleece cover stitch it dropping the stitches in the back side, I can do it on flannel but not fleece, any help out there?????
My needle bar moves how can tell me how to fix it thinks
Is this video/ manual also in German language ??????
I just purchased a used Husqvarna Viking Huskylock 910 ... do you have a You Tube video on this model as the one you are doing for the 936 machine?
I saw a video for the 905 & 910 by Vintage Embroidery
savez vous ou puis-je trouver cette démonstration en français? merci
Wide coverstitch
Let me know and I watch it was so great ha ha so
I'm grasping at straws here. I purchased a Designer Diamond. The thread broke constantly. It was in for service 4 times in 8 months and they couldn't find any reason for the thread to break. Of course, it must have been my fault. Long story short, I traded that machine in and paid the difference for a Designer Diamond Deluxe (both machines were refurbished; also, I purchased them at Husqvarna dealers in Joann Fabrics). I've had the "new" machine for one week and the thread breaks EVERY time I embroider. Multiple times. I talked to the Manager who has been great, and she told me to bring it in with everything I use with it, i.e., stabilizer, thread, interfacing, fabric, needles, designs, etc. She and her assistant sat with me for 2 hours and the thread broke and shredded continuously. So they recommended that I use different stabilizer, interfacing and Insigna titanium embroidery needles, all of which I purchased. I took the machine home and it broke and shredded the thread the same as before. Do you have any suggestions? I'm tearing my hair out and am beginning to wonder if Husqvarna Viking is top of the line after all.
***** What kind of thread are you using? Are you using the thread holder and what size of spool? I have found that if on the bigger spools I place them in the front make the thread go over the extra spool holder under the 1st spool holder and then thread the machine. What size and kind of needle are you using? And always set the machine on the slowest speed setting that helps too. Just a few things to try. I love mine D-1.
Carol N TX
Thank you Carol. I sat with the department manager at the store where I bought my embroidery machine today. I'll have to experiment more, but with a combination of things and a jeans needle, my machine worked beautifully. Thanks for your response.
Sally Williams my local dealer no longer sells husqvarna because she said "they're not made like they once were"
4
No sale la leyenda en la pantalla solo se ven Rayas
If anyone has a foot control pedal they are willing to sell please let me know