Antec CX200M RGB Elite System Build Thoughts - Review
Вставка
- Опубліковано 22 сер 2024
- In this video im doing a system build using an Antec CX200M RGB Elite Case and my findings of this car are extremely disappointing if you are wanting to use a mid to high range graphics card in this case
================================================
================================================
Tools that i use frequently that are Ali-express Affiliate linked
Sunshine S-918E Heatpad: s.click.aliexp...
Previously i had a CPB Heatpad, but that died late 2022, so i am now using
The Sunshine S-918E
B7000 Frame Adhesvie: s.click.aliexp...
my go to glue for almost everything now days!
Thin Metal Pry Tool: s.click.aliexp...
Used to open ipad and remove glued back covers on phones
Heat Resistant Tape: s.click.aliexpr...
When using the heat gun near sensitive parts, its best to cover them
With this to protect them
Double Sided Black Tape: s.click.aliexpr...
The usual tape i use on most repairs, on screens
Red Clear Tape: s.click.aliexpr...
For things that need more Stick!,usually on tablet digitizers
Phone Repair Tool Kit: s.click.aliexpr...
A Similar tool kit to mine, that i use for those random screws that you dont normally see
Hakko FX 951 Clone Station: s.click.aliexp...
My Soldering Station i use, so far it has been good
Quick 861DW Hot Air Station: s.click.aliexp...
This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase
Power Z USB Amp Tester: s.click.aliexp...
Advanced readouts of power draw on devices
Basic USB Amp Tester: s.click.aliexp...
A Simple Amp tester to see if your charger is actually putting out power
Black Tweezers Set: s.click.aliexp...
The Black Tweezers i use in my videos
Large Metal Pry Tool: s.click.aliexpr...
This is the same as the metal pry tool i use, different brand printed on it
Pry Tool: s.click.aliexpr...
A New Version of the pry tools
Basic Digital Microscope: s.click.aliexp...
This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed
Orico 120w 10 Port Charging Station: s.click.aliexpr...
The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job
One page i go to when I'm curious what new repair tools are out is:
Wozniak Store: s.click.aliexpr...
Thanks for this detailed review of the case. You saved me.
Cheers
Thanks for the video! Might be able to fit a 2.5 slot card provided the PCIe x16 slot are in the first slot. Yours are in slot 2 so graphics card choice would be much more limited.
cheers
as I said make sure you do plenty of research if you are wanting to use this case
The ventilated bottom area is a great idea for getting bottom airflow in. I hope more case makers start doing it.
Indeed I do like that
Thanks heaps for your review, mate! I was planning to buy this case, but now really concerned...
I would be double / triple checking what graphics card you want to buy
if it's a 2 1/2 slot card, like a 3060/7700xt/4070 mid to high end Cards I would probably pass
If you get a MB with a gpu slot in line with those middle screws (for the top card slot), you should be able to fit larger graphics cards
indeed
Great review. An older card, but FYI my Aorus 2070 Super fit perfectly.
cheers. good to read you haven't had a drama
Hi rick!! Do you think if we change the stock coolers for ones that has less height(like 12mm) the gpu would probably fit??
possibly, but not worth the cost of putting an aftermarket cooler on a GPU
Hello friend! Thanks for the video.
What gpu are using in this video? My doubt Is if my MSI 3060 could Fit in this case
The size of my gpu Is 276x131x51 mm
This is one of those small cases where you really have to think which components you’d want to put in
Indeed
Haven't seen a case for years like that
Are the fans supplied with the case PWM fans or DC fans?
DC Fans, connect up via Molex 1:36
just finished a build in this case, had to relocate one of the bottom fans onto my cpu cooler because i needed to put in a wifi card, but i am using a 2.5 slot gpu (MB has x16 in 1st slot), so the wifi card has to go in the bottommost slot. overall im quite okay with how it turned out
also had to remove the drive cages entirely because my psu is a normal size one with fully modular cables, putting the cage back in would make it so uncomfortable to work on
sorry I'm not really an expert on case fans, will the ones in this case connect to the motherboard and ramp up and down accordingly or will they get power from the PSU and constantly run at full speed?
constantly at full speed from what i can tell. cheap molex fans suck :(
You can buy a fan controller to control soeeds
fixed speed unfortunately and a little loud :( but the upside is my pc stays cool all the time in this case
@@minbcraft you can buy a fan controller to control the speeds
They control speed by increasing or decreasing voltage
What pin did you connect to turn the RGB on and off?
Do you reckon a 2 slot GPU would fit alright?
along as it is only a 2 slot
the cooler doesn't over hang in to the 3rd
Thank you for replying
Hey there, I'm building a PC with the same case and motherboard. We've set it up but our fans don't spin. Any advice? Cheers,
Are the fans connected to a PSU power cable? It's usually a Molex connector. If they don't spin even after that either the PSU is bad or the fans are bad.
Thanks for the video: was going to get one, but it's trash. So many compromises. Conventional mATX cases all day long.
cheers, I find it's too limiting for most
Wtf yesterday i built a PC for my brother with this same case, motherboard and I think processor (7600) thankfully I had none of these issues. I used a MSI 4060 ventus, fit super well thing is tiny. Easily the best cleanest build I've done. Sucks that the fans can't change colour tho.
that model is a dual slot card
if it took up a little of the 3rd slot it would hit the fan like mine did
if you got a 4070 instead I don't think it would have fit
@@rickstechrepairs yea bruva even with such a tiny card it's still a tight fit. Thought it was funny how similar the builds were and that you uploaded it the same day I built it tho
I cant manage to find a place to put my hdd in this case. Itll have to be shoved into the box like thing beside the psu 😭 maybe im missing a mount of sorts
It should go in the bottom of the case infront of the power supply
Will rx 6600 fit in this case?
yes most should
So, an rtx 3060 dual (2 ports) would fit?
along as it only takes 2 slots exactly
hi an atx wouldnt fit into these right or can it?
correct mATX only
Will the 7900 GRE fit in this?
doubtful
How is the cpu cooling of this case?
depends what cpu cooler you use
@@rickstechrepairs would you get a water cooler top mount in there?
an rtx 3080 3.0 slots will fit??
certainly not
it will require the bottom 2x Fans to be removed and even then it might not fit
It's quite noisy, right?
not too bad
It's mini atx
matx
name motherboard?
Gigabyte B650M Gaming Wifi
AM5 Socket Motherboard
@@rickstechrepairs msi?