Yes I was just going to use my night timber but I’m glad I got the scout. awesome plane to learn on and you can bride. your skills with it down the road too.
@Bill K. Is this your first plane? Even with safe mode it’s a great Idea to get help with the first few flights. just until you can land and takeoff without thinking of it. Hope your back flying soon. a umx is also a great cheap way to get some flight under your belt. they can take a beating and are easy to fix.
@@FORDEVR no, this is not my first plane. I was flying a bit above my skill level and let the AeroScout get behind me and into the sun. Crashed it straight into the ground. Funny you should mention UMX... I have a UMX Turbo Timber that I fly many times more than my other three planes combined. I can step out of my house and and have Acres over which I can fly. I bring my larger planes to the club's flying field which is a short drive away.
@@BillKisel The sun is always a mean lady.😁. Yes The umx are great. I always thought they were not the best planes to fly because they were so small. Then I tried a umx pitts and I was sold on them. So much fun. I use the umx to teach ppl now because they are so fun and tough with a fast charge time and long fly time.
Thx I try. I really enjoy teaching others to fly and wish the Safe technology existed when I was learning. When I was learning “Safe” mode was hiding behind a tree.😜
I am not brand new at rc planes but fairly beginner like. I started in November 2022, i will get this in February. Looks easy. I love my pioneer 620mm. Aeroscout is next, since i go through props like crazy on tail draggers. Great flying.
Thank you. Make sure your tail draggers are trimmed with a bit of up when learning or even better if you can just use a bit of up stick until your up to speed on takeoff. then when you get to speed it should just pop into the air. When landing just let it drop and flair at the end. The up elevator you use to flair should help keep your tail on the ground so you don’t go through as many props. I trim my wife’s to climb with full throttle so no elevator is nessasary. just hit the throttle and she takes off. hope the tips help. enjoy your new plane. even though it’s a beginner plane I still enjoy it. flys great and when you move the control surfaces to the inside of the horn it is pretty responsive.👍
Thanks. Just got back in the sticks today after a long winter of no flying. Feels great. The new UMX Turbo Timber Evolution is a awesome plane. I crashed and busted 3/4 wings off the UMX pitts today and with a hot glue gun and 20 mins it was flying just like th day I took it out of the box. Awesome little planes.🤟🥳
@@FORDEVR oh yeah that's awesome your very good at I think landing I'm still alittle rusty Im sitting down trying to figure out couple of electric planes the evolution turbo timber was one I was looking at I love the top hatch. you had exciting day of flying glad you was able to repair your Pitts airplane we have a swap meat event at my airpark the 15th going to take my tower 60 sport few laps while I'm there that be my first flight of the year getting excited to fly 😁
@@davidking3918 What are you trying to figure out? I find that simply killing the power(especially in safe mode) and just letting the plane glide. Then slowly flair until it lands is a good way to learn. When we are learning our landings we tend to over think them. I have landed my viper 90, Draco and the f-16 all using this technique with good success.
The right time may not come but right now will.🥰 The trick is having someone trim the plane to fly level. This makes learning waaay easier. I trimmed it to fly level and to climb slightly at full throttle. Then if/when you get into trouble you just hit the throttle and usually this is enough to get you out of trouble. Happy flying.
Yes You can. I just prefer it on the button. then I just let go and fly. It it’s a switch and I get into a tight situation I could hit the wrong switch. With the button there is no mistaking it. Thanks for watching.
@@FORDEVR my radio has the new update and now once I hit the switch all I have to to do is touch the sticks to gain back control. It's pretty amazing setup
@@FORDEVR yes. You can program it through the radio. You got to the last of telemetry and it has directions on the menu. Brake type: Pick reverse Power 7. Channel 7 is default and then assign it to a switch. I think aux 2 is channel 7. You need to be bound to the plane. I'm using an NX8.
@@FORDEVR yep. Another guy with an older AeroScout couldn't do it. But these newer scouts have an avian ESC and it's pretty simple to program the ESC through your radio. This little plane floats forever, I need to put some flaps on here to get it down
@Rob Katus yes She has a dx6e and I have a nx10 If you get the rtf version it is harder to hook up a buddy box. I couldn’t figure it out with my buddies. Customer service is pretty good at Spektrum and if it’s possible they will be able to help you figure it out.👍
She is doing a fantastic job she has a good teacher
Now that is how it is done. Congrats on one fine flight.
Thx. Really enjoyed it.
Nice job 🔥 I love my AeroScout. Definitely a great choice for a first plane. 👍
Yes I was just going to use my night timber but I’m glad I got the scout. awesome plane to learn on and you can bride. your skills with it down the road too.
Nice to see it's a family hobby happening.... well done. 😀 dan h
More by force than by choice.😂
She did very good.
My AeroScout is waiting for HH to restock spare fuselages. Hopefully by the middle of October she'll be back in the air.
@Bill K. Is this your first plane? Even with safe mode it’s a great Idea to get help with the first few flights. just until you can land and takeoff without thinking of it. Hope your back flying soon. a umx is also a great cheap way to get some flight under your belt. they can take a beating and are easy to fix.
@@FORDEVR no, this is not my first plane. I was flying a bit above my skill level and let the AeroScout get behind me and into the sun. Crashed it straight into the ground.
Funny you should mention UMX... I have a UMX Turbo Timber that I fly many times more than my other three planes combined. I can step out of my house and and have Acres over which I can fly. I bring my larger planes to the club's flying field which is a short drive away.
@@BillKisel The sun is always a mean lady.😁. Yes The umx are great. I always thought they were not the best planes to fly because they were so small. Then I tried a umx pitts and I was sold on them. So much fun. I use the umx to teach ppl now because they are so fun and tough with a fast charge time and long fly time.
@@FORDEVR It looks like a fun UMX plane. If I was into 3D or even heavy acrobatics I go for the newer UMX Timber X.
@@BillKisel bipe umx is fun for scale or acrobatics
You are a very good flight instructor.😊
Thx I try. I really enjoy teaching others to fly and wish the Safe technology existed when I was learning. When I was learning “Safe” mode was hiding behind a tree.😜
I am not brand new at rc planes but fairly beginner like. I started in November 2022, i will get this in February. Looks easy. I love my pioneer 620mm. Aeroscout is next, since i go through props like crazy on tail draggers. Great flying.
Thank you. Make sure your tail draggers are trimmed with a bit of up when learning or even better if you can just use a bit of up stick until your up to speed on takeoff. then when you get to speed it should just pop into the air.
When landing just let it drop and flair at the end. The up elevator you use to flair should help keep your tail on the ground so you don’t go through as many props.
I trim my wife’s to climb with full throttle so no elevator is nessasary. just hit the throttle and she takes off.
hope the tips help.
enjoy your new plane. even though it’s a beginner plane I still enjoy it. flys great and when you move the control surfaces to the inside of the horn it is pretty responsive.👍
Good job😮
Great flying looks like fun
Thanks. Just got back in the sticks today after a long winter of no flying. Feels great. The new UMX Turbo Timber Evolution is a awesome plane. I crashed and busted 3/4 wings off the UMX pitts today and with a hot glue gun and 20 mins it was flying just like th day I took it out of the box. Awesome little planes.🤟🥳
@@FORDEVR oh yeah that's awesome your very good at I think landing I'm still alittle rusty Im sitting down trying to figure out couple of electric planes the evolution turbo timber was one I was looking at I love the top hatch. you had exciting day of flying glad you was able to repair your Pitts airplane we have a swap meat event at my airpark the 15th going to take my tower 60 sport few laps while I'm there that be my first flight of the year getting excited to fly 😁
@@davidking3918 What are you trying to figure out?
I find that simply killing the power(especially in safe mode) and just letting the plane glide. Then slowly flair until it lands is a good way to learn. When we are learning our landings we tend to over think them. I have landed my viper 90, Draco and the f-16 all using this technique with good success.
@@FORDEVR Trying to figure out what plane he should get lol.
I have me one I had it for a couple of years I never flew it yet do.to my health issues hopefully this summer I will.get a chance to take it up
The right time may not come but right now will.🥰 The trick is having someone trim the plane to fly level. This makes learning waaay easier. I trimmed it to fly level and to climb slightly at full throttle. Then if/when you get into trouble you just hit the throttle and usually this is enough to get you out of trouble. Happy flying.
Beautiful land
Thank you.
Great
Thank you.
U can setup the NX10 buddy box on a switch sonu don't have to hold the button in
Yes You can. I just prefer it on the button. then I just let go and fly. It it’s a switch and I get into a tight situation I could hit the wrong switch. With the button there is no mistaking it. Thanks for watching.
@@FORDEVR my radio has the new update and now once I hit the switch all I have to to do is touch the sticks to gain back control. It's pretty amazing setup
@@josephpuzzo1 Which radio is that?
Great job
Thank you. I was very proud of her.
Awesome
Thank you
Good for you and beautiful flay
Very nice flay
Hey I just bought another AeroScout and programmed Reverse thrust in!
I think we can program that into any avian smart ESC
Cool! Is it all stock?
@@FORDEVR yes. You can program it through the radio. You got to the last of telemetry and it has directions on the menu. Brake type: Pick reverse
Power 7. Channel 7 is default and then assign it to a switch. I think aux 2 is channel 7. You need to be bound to the plane. I'm using an NX8.
@@FORDEVR yep. Another guy with an older AeroScout couldn't do it. But these newer scouts have an avian ESC and it's pretty simple to program the ESC through your radio. This little plane floats forever, I need to put some flaps on here to get it down
@@HciContractor I’ll have to check. I think hers is the older version. Thanks for the tips.
Aeroscout don’t have avian esc
Are you using a remote to take over if she gets in trouble if so how? I just bought this and want to teach my son to fly
@Rob Katus
yes She has a dx6e and I have a nx10
If you get the rtf version it is harder to hook up a buddy box. I couldn’t figure it out with my buddies. Customer service is pretty good at Spektrum and if it’s possible they will be able to help you figure it out.👍
U can use a the dxs to buddy box yes. What radio do u have?