The exhaust definitely makes the biggest difference. I installed a Borla muffler on mine leaving the resonator, and the low end to mid range response is so much better now!
@@kyleolin3566correct most people think intake and exhaust are enough, it’s not the ecu needs to be flashed/changed or your unlikely to see bigger gains due to the map on it. You gain horsepower and a slight increase in mpg when you do it that way. Did I take and new chip on a grand Cherokee got 12 horses and 7 lbft of torque. Was a little under a grand to have done.
I just got the blackheart exhaust on today with an s&b intake. I'm also running the pulsar performance module and together the jeep is really snappy and wakes up the 3.6 nicely. Highway driving is much improved and in general.
I have a 2012 JKU sahara on 35s as well. I just (last month ) put a Cold Air intake on mine and geared it with 4.56 yukons and a superships. Made a happy change and I am looking fwd to doing the exhaust nest summer.
The stock intake on the jeep wrangler is a thing of beauty, a rare engineering example of functionality over regulation. You don't need an aftermarket intake on a wrangler, it doesn't do anything, zip, zero. It also increases your chances of sucking water into the intake manifold when you replace it. The exhaust is something that I can get behind though, but you need to remove the catalytic converters and flash the ECU. If you're looking to stay legal, you'll need a custom exhaust to accommodate the lift you chose, if you're hard-core.
As @@IGOPU explained ecu correct the afr right away or you would melt the piston on the first start making it lean. Adding more airflow by itself won't do a thing to power, 7 HP difference can just be observed between two pulls back to back. If you want power you need to move timing and or compression.
Flash tune it so the vehicle knows there are larger tires/wheels. Will make it perform at the optimal levels and also get your Speedo back in line. Then consider performance parts. Just my two cents! Once I did that after 37” tires it made the jeep run as it should and had the familiar response I was used to
Loved it and making more power is always a good thing. The next step is to swap out your gear sets and install a ratio that will bring your engines operating range back into its torque sweet spot. Love the new diff cover by the way..
You are definitely right about a re-gear. I got the diff covers from B&M. They actually have dipsticks built into them to check gear oil levels or check for water intrusion in the diffs if you have been wheeling in creeks. Thanks for watching!
That’s pretty awesome gains across the power band. I think I’ll be installing a delta force air box as well, still debating on which specific exhaust to go with but the sound on yours is nice.
You can't never go wrong with those power add on's but☝️ if you want your Jeep to get back to how it felt with stock tires you might consider changing your Ring & pinion and a good high performance clutch. Nice Jeep btw.👍🏽🇺🇸
Perfect timing to stumble on your video, I'm just getting ready to install a flowmaster cat back exhaust and a volant cold air intake and snorkel combo. 👍👍
I have a 1992 renegade that came with a cold air intake and it’s a blast to drive especially in the summer when my Jeep permanently becomes topless until fall
My comments are mainly on your video. Very, very well done and clear explanations. I am impressed you were able to get the old exhaust off without having to lift the vehicle. I am waiting for a Pypes higher clearance exhaust purchased through Quadratec. Right now, I will likely do a K/N flat unit (no CAI). As one response stated, I will be regearing (through 4WP). Again, very good video. Mine is a 2020, Sport Altitude.
I did the same thing with my 2014 4 door wrangler except I used a K&N aircharger intake system and a magnaflow performance catback exhaust. It definitely increased acceleration and better high speed highway driving. not sure exactly how much horsepower increase though. And definitely sounds a lot more "manly" ; )
2013 sport with 35" + 3" lift : I upgraded with the cheapest air intake and exhaust system for 350 CAD$. Nice sound and little more power of course. But, the big difference is in the mileage... an average of 4.5 miles/gallon increased. Don't hesitate to do these upgradres !!!
I agree totally. I' m looking for efficiency (as in an increase in MPG) more than HP and/or FPT. So....I'm going with the Rock Crusher exhaust and the AMFIB Snorkel Low Mount intake system. I'll let you know how it works out after the install,
Thanks for this simple instructional video it's crazy that this showed up in my feed cuz I was just thinking I really need to figure out something for my JK the fact that it's a Rubicon and it is gutless really gets to me and there's no way it's going to be able to push 37s so thanks for this video I'm probably going to order that exhaust system and that intake right now
I’m hailing from Florida but originally from Greensboro and charlotte nc! Good to hear from another keeper from nc! I’m like you I always drive with the top down!!!
Ive owned a v6 in the past and i agree itll never sound like a v8 but i gotta say i really like the sound of this one. While not huge gains its still a gain without voiding a warranty. I did the same thing on my 2018 f-150. Did it make it fast, no. Did it make it sound 1,000x better, yes. 👍
JScan app and OBD2 is the cheapest way to update the ecu with new mod tyre size. It makes an amazing difference. Maps power and shifts brilliantly. Gets rid of her chatter. I was completely stunned when I did mine. Tip go 1 higher there size than what you fitted.
Gearing swap in the axles helps a ton too. Coworker of mine put 50” with lift on his after gearing swap it was like stock again with the mpg’s was getting before. Also good to checked the fluids down there too
I went with the K&N CAI and the American thunder cat back from Flowmaster....love the minor boost and especially the sound. I have no muffler in the old location. It now sits where the resonator used to mount
@@queensapphire7717 never put it on a dyno machine, but it does feel more pep at the peddle, enough the I do this combination on my other jeep and all the cars I have owned......and I hate to waste money....
My 02' GC 4.7ho Pushes 275-300HP with a 231amc transfer case with 2wd option, magnaflow performance exhaust. Even with a 6 in lift kit she rips down the road like a real jeep should.
One thing that gets me with these after market intake kits is the lack of accumulators. Those big blanked off tubes on the stock intake assembly are there to hold clean air. When you step on the throttle hard, this air is drawn into the motor to give a better instant torque numbers. They have no effect on average number though. So think of it this way, those are there for taking off from stop lights and sighs.
Thanks for doing the test so we can avoid doing the same mistakes. Basically no change in power. A 7hp difference can be due to tempe or atmospheric co ditions. You would better off playing with the timing and compression, if the head flow enough you might gain some hp.
The peak HP gains are cool and all... but when you look at the graphs you have those numbers faster down low were it counts, especially if you are going off road.
I would advise caution with a cold air intake and offroading. I've personally seen a few suck water in causing a junked hydrolocked engine. Very well made video. Thanks for the real life numbers based on the dyno!
Stock Rubi 4.10 does just fine on 35’s, could get away with 37’s on a manual. And yeah I’d be super cautious about water crossings with an intake like that.
Sure a little more power never hurts but in reality the issue you're suffering is simply a matter of gearing in my opinion. Of course if you have more rotational mass you are going to notice a loss in power, but in terms of putting 35s on with even 4.10 gearing, The issue shouldn't be power. I think the problem your experiencing most likely is not due to higher rotational mass. I believe you're going to notice a tremendous difference by regearing your Jeep. Maybe going to something like a 5.13 gear set. A lot of people(maybe not you) throw a cheap lift kit on a Jeep destroy the ride quality and put a lot of stress on the engine and transmission because they don't regear and fix geometry changes when they lift their Jeep. You put bigger tires on even just a couple of inches bigger chances are you've changed your gear ratio to a point where your vehicle is going to feel significantly more sluggish. When you put a lift on you change all the geometry of the Jeep and often times this causes wandering and sometimes it ends up resulting in death wobble and a whole slew of other issues related to driveline. Of course a couple of inches you're probably not going to notice that much of a difference if you've got adjustable trailing arms and have taken your Jeep to an alignment shop to have them adjusted properly, but on our Jeep Wrangler(4.5in lift) when we got it it was awful to drive, The shocks were terrible, All of the steering geometry was out of whack and it had bad ball joints on top of that. So after putting it nearly $5,000 in teraflex front end parts it drives like a dream. The only thing left to fix is the cheap shocks that came with the cheap lift kit. So take it from me If you'd like to lift your Jeep do it the right way, You're going to be so much more happy with the results and more comfortable driving it to far away places. No one likes a Jeep that wanders into other lanes or can't get out of its own way. I understand doing it the right way can oftentimes result in a lot more money spent and if that's the case well I can understand people trying to just get by with a cheap lift kit and upgraded as you go but just know what your getting into. Sometimes the best left kit is the one that you build on as you go. So when you go around town telling your friends and buddies not to get a Jeep and lift it because you've had a bad experience with it just know that when a lift is done right it rides like factory, or close.
Had the same problem with my 2005 jeep wrangler unlimited. 4inch suspension lift with 33s. Put in cold air intake and exhaust nothing worked. Then I regeared it. Put in 4.56 gears and the power came back. Guys make sure you regear it once those big tires come on.
@@djdiheheidifhdhdje261 he’s talking about rear differential. 35’s need a 4.10 ratio or 4.56. Stock is 3.20. The gears spin the same with larger tires making it slower. Larger ratios are needed for bigger tires. Otherwise it’s a 25 second to 0-60.
new cool air & exhaust dyno 7 & 8 hp & torque bump cool across range no reprogramming from stock. God not worth it on good muffler but when replacing sure go bigger. The freeier cold air seems no brainer esp in hot climates
Hello all you crazy Jeep owners! 😜👍 I finally bought a Jeep!! Just thrilled - got a 2014 Wrangler with 33's and a lift, and caught the bug ! My head is on a swivel going down the road looking at every cool Jeep mod that goes by. I'm sure a couple folks must have had their fingers ready to call 911 as I inspect their beautiful beast! HA! Took my son to Memphis and then Little Rock over the weekend - was having a great trip, until I noticed I was struggling to keep up with traffic. She was okay at 75, maybe 80 when passing others, but when I had to slow for traffic, it took some effort to get back to speed. Definitely looking to add some upgrades for even a little more oomph. Any additional suggestions are very much appreciated! This one looked like a fairly quick way to grab a few HPs. Thank you!
I definitely like the sound and the horse power gain is nice as well. Not to happy with the air box. You hit water and you have water in your engine. The stock box is better at keeping water out of your engine.
I am serious considering buy a jeep but I am wondering about it’s reliability What year is this jeep and why did you choose manual transmission over automatic transmission
I have a 2016 with manual transmission and notice the low torque at lower rpm around 1500 to 2000. It looks like the bottom end where the 3.6 really needs it saw a healthy boost, but it’s hard to see the details in the video. How was the drive ability improved down low?
man, that is very nice, im looking to do that as well after bumping up to 33s. so thats a dry filter, not one you have to lube up right? is it cleanable?
Add e3 spark plugs i swear by them my buddy did nothing but change his plugs to e3 at the track and shaved a full second off his 1/4 mile time. I run them in my rides and bikes too.
Smart video, I haven't done the air box mod because of possible water intake when fording. This video should be a template for all wannabe Jeep videographers.
I know this is kind of an old video but I was wondering how you like the wheels on your Jeep I just got them on mine and then found out their cast and I was worried about cracking and potentially off-road have you had any issues?
what about the gear ratio, I have 37 tires and 5.13 gears and my jeep feels powerful, and the pick up is damn fast for a jeep, your exhaust does sound nice.
It does mean a huge difference when you know big tires and rims my brother his is stock and I have a big lift and tires and rims and I has a cold air intake and headers but still want more power I thought about seeing if a tuner or chip would make a difference but with the big heavy bumpers and roof rack add more weight but I'd love to just put a v8 in it but has to be ways to pull more power out the v6
My jeep seems lacking in power and I have brand new spark plugs and wires, cold air intake, catalytic converters, and no muffler and it still seems like nothing changes
Probably among the greatest UA-cam how to video. Not annoying like everyone else who showcases the damn box it came in for 10 min....
Thanks!
Amen. Box - not important! Nice explanation
Man I agree. Sounds like a professional tv show. I love it.
"I'll find any excuse to ride around with the top and doors off". I felt that in my soul!
The exhaust definitely makes the biggest difference. I installed a Borla muffler on mine leaving the resonator, and the low end to mid range response is so much better now!
The sound difference is amazing! I really thought you were going to get more like 10 to 15 hp out of doing that. Wow.
Ecu needs adjusted. Look at the power curve. It is rough
@@kyleolin3566correct most people think intake and exhaust are enough, it’s not the ecu needs to be flashed/changed or your unlikely to see bigger gains due to the map on it. You gain horsepower and a slight increase in mpg when you do it that way.
Did I take and new chip on a grand Cherokee got 12 horses and 7 lbft of torque. Was a little under a grand to have done.
I just got the blackheart exhaust on today with an s&b intake. I'm also running the pulsar performance module and together the jeep is really snappy and wakes up the 3.6 nicely. Highway driving is much improved and in general.
I have a 2012 JKU sahara on 35s as well. I just (last month ) put a Cold Air intake on mine and geared it with 4.56 yukons and a superships. Made a happy change and I am looking fwd to doing the exhaust nest summer.
The stock intake on the jeep wrangler is a thing of beauty, a rare engineering example of functionality over regulation. You don't need an aftermarket intake on a wrangler, it doesn't do anything, zip, zero. It also increases your chances of sucking water into the intake manifold when you replace it. The exhaust is something that I can get behind though, but you need to remove the catalytic converters and flash the ECU. If you're looking to stay legal, you'll need a custom exhaust to accommodate the lift you chose, if you're hard-core.
Interesting as K&N has a CAI snorkel kit that puts the air intake above the windshield. You must be driving totally submerged
@@twoallameyeah… actually… in Alaska we’re routinely finding water crossings that threaten a stock intake.
You are wrong and a sicopant
The power will be even better after ~500km.
ECU will change the settings.
ecu will change air fuel ratio pretty much instantly
The auto transmission will learn and change as well.
As @@IGOPU explained ecu correct the afr right away or you would melt the piston on the first start making it lean.
Adding more airflow by itself won't do a thing to power, 7 HP difference can just be observed between two pulls back to back.
If you want power you need to move timing and or compression.
Flash tune it so the vehicle knows there are larger tires/wheels. Will make it perform at the optimal levels and also get your Speedo back in line. Then consider performance parts. Just my two cents! Once I did that after 37” tires it made the jeep run as it should and had the familiar response I was used to
About time! Everyone should be testing these claims of power increase at the dyno.
The best way to get power back after adding larger tires is a gear swap.
That’s like 2k
And it’s still not enough. Here in the mountains my jk on 37’s with 5:13 gears is a total dog
@@francisdebelodang, I’m on 35s thinking of 4.56 or 4.88 what do you recommend
@@Danielxperez14JL two door manual on 35 with 5:13 . Was running 4:88 on my JK auto for 37 .
5:13 on the JL because planning to run 37 soon .
@@Joker-TMF so 488 is good for 35s? My jk feels super slow ever since I bought it
Loved it and making more power is always a good thing. The next step is to swap out your gear sets and install a ratio that will bring your engines operating range back into its torque sweet spot. Love the new diff cover by the way..
You are definitely right about a re-gear. I got the diff covers from B&M. They actually have dipsticks built into them to check gear oil levels or check for water intrusion in the diffs if you have been wheeling in creeks. Thanks for watching!
That’s pretty awesome gains across the power band. I think I’ll be installing a delta force air box as well, still debating on which specific exhaust to go with but the sound on yours is nice.
You can't never go wrong with those power add on's but☝️ if you want your Jeep to get back to how it felt with stock tires you might consider changing your Ring & pinion and a good high performance clutch. Nice Jeep btw.👍🏽🇺🇸
A re-gear would definitely help. Thanks for watching!
@@TheHorsepowerMonster Thank you for sharing.👍🏽🇺🇸
Perfect timing to stumble on your video, I'm just getting ready to install a flowmaster cat back exhaust and a volant cold air intake and snorkel combo. 👍👍
Way better factory numbers than I expected.
I have a 1992 renegade that came with a cold air intake and it’s a blast to drive especially in the summer when my Jeep permanently becomes topless until fall
You mean temporarily than.
Such a great video it’s nice to see actual dyno results awesome job thank you
My comments are mainly on your video. Very, very well done and clear explanations. I am impressed you were able to get the old exhaust off without having to lift the vehicle. I am waiting for a Pypes higher clearance exhaust purchased through Quadratec. Right now, I will likely do a K/N flat unit (no CAI). As one response stated, I will be regearing (through 4WP). Again, very good video. Mine is a 2020, Sport Altitude.
Cool, good luck!
I did the same thing with my 2014 4 door wrangler except I used a K&N aircharger intake system and a magnaflow performance catback exhaust. It definitely increased acceleration and better high speed highway driving. not sure exactly how much horsepower increase though. And definitely sounds a lot more "manly" ; )
2013 sport with 35" + 3" lift : I upgraded with the cheapest air intake and exhaust system for 350 CAD$. Nice sound and little more power of course. But, the big difference is in the mileage... an average of 4.5 miles/gallon increased. Don't hesitate to do these upgradres !!!
I agree totally. I' m looking for efficiency (as in an increase in MPG) more than HP and/or FPT. So....I'm going with the Rock Crusher exhaust and the AMFIB Snorkel Low Mount intake system.
I'll let you know how it works out after the install,
what air intake and exhaust did you get?
Sounds nice for sure!
I went with flowmaster, outlaw series on mine and a banks ram air intake.
Thanks for this simple instructional video it's crazy that this showed up in my feed cuz I was just thinking I really need to figure out something for my JK the fact that it's a Rubicon and it is gutless really gets to me and there's no way it's going to be able to push 37s so thanks for this video I'm probably going to order that exhaust system and that intake right now
What gears are you running? And how much extra weight on the chassis?
I’m hailing from Florida but originally from Greensboro and charlotte nc! Good to hear from another keeper from nc! I’m like you I always drive with the top down!!!
Cool. Thanks for the comment, and thanks for watching!
Cat Back. Yes. Dont like thought of a "cold" air intake though, no more water fording... Gear it.
I also went with the Hooker Black Heart. I have used other brands on other Jeeps and Hooker is BY FAR the best!
Nothing beats a good sounding Hooker!!
This video deserves more respect
Thanks!
Have a 13 with 155,000 miles on it and starting to loose power. The engine still runs great, probably a CAT getting plugged. Great video
Ive owned a v6 in the past and i agree itll never sound like a v8 but i gotta say i really like the sound of this one. While not huge gains its still a gain without voiding a warranty. I did the same thing on my 2018 f-150. Did it make it fast, no. Did it make it sound 1,000x better, yes. 👍
JScan app and OBD2 is the cheapest way to update the ecu with new mod tyre size. It makes an amazing difference. Maps power and shifts brilliantly. Gets rid of her chatter. I was completely stunned when I did mine. Tip go 1 higher there size than what you fitted.
red line governor factor of 108mph good info so dyno in 3rd gear cool.
Gearing swap in the axles helps a ton too. Coworker of mine put 50” with lift on his after gearing swap it was like stock again with the mpg’s was getting before. Also good to checked the fluids down there too
I went with the K&N CAI and the American thunder cat back from Flowmaster....love the minor boost and especially the sound. I have no muffler in the old location. It now sits where the resonator used to mount
What about the 280 HP and 270 torque ? All BS ?
@@queensapphire7717 never put it on a dyno machine, but it does feel more pep at the peddle, enough the I do this combination on my other jeep and all the cars I have owned......and I hate to waste money....
My 02' GC 4.7ho Pushes 275-300HP with a 231amc transfer case with 2wd option, magnaflow performance exhaust. Even with a 6 in lift kit she rips down the road like a real jeep should.
Pick a horsepower number. There is no she does between this and that. Come on now.
@@dirtysouthtv2209 came stock with 275hp I already put in over 1K$ in HP mods, def pushing at least 300Hp fuck a dyno lol
@@dirtysouthtv2209 wheres your jeep🤔 lol
Waited 8 months to get this exhaust. Installing today.
The exhaust sounds really nice.
One thing that gets me with these after market intake kits is the lack of accumulators. Those big blanked off tubes on the stock intake assembly are there to hold clean air. When you step on the throttle hard, this air is drawn into the motor to give a better instant torque numbers. They have no effect on average number though. So think of it this way, those are there for taking off from stop lights and sighs.
Interesting. I thought those were to designed to reduce intake noise.
Looks like you should take a look at your rear axle vent tube probably the front as well. Seems pretty tight after the lift.
I have the Mopar intake system for my 2013 jk Rubicon works just fine.Also added throttle body spacer and also made slight difference
The exhaust sounds great. It seems like the air filter could get waterlogged pretty quick.
Did you tune it as well? Surely that would have gotten bigger gains than the intake and exhaust alone.
For future reference they make pliers to pull those exhaust hangers. You'll never fight them again
Thanks for doing the test so we can avoid doing the same mistakes.
Basically no change in power. A 7hp difference can be due to tempe or atmospheric co ditions.
You would better off playing with the timing and compression, if the head flow enough you might gain some hp.
I did the flowmaster outlaw exhaust and banks ram air intake for my rubicon and noticed gainz
Would be curious to know which upgrade made what horsepower gain.
Yes they should have done a dyno pull after each mod then with both installed.
The peak HP gains are cool and all... but when you look at the graphs you have those numbers faster down low were it counts, especially if you are going off road.
I’m from NC! I have a Jeep jk 2014. 2.5 with 35s
Excellent video, Awesome to see dyno results I can't wait to do mine
Sounds good! Film work is always good. Thanks
Hey thanks! And thanks for watching!
I would advise caution with a cold air intake and offroading. I've personally seen a few suck water in causing a junked hydrolocked engine.
Very well made video. Thanks for the real life numbers based on the dyno!
You think this is going off road? First step after tires would be a re-gear if it is going off road.
@@ShainAndrews lots of people offroad with bad gearing I would say most people
Stock Rubi 4.10 does just fine on 35’s, could get away with 37’s on a manual.
And yeah I’d be super cautious about water crossings with an intake like that.
Sure a little more power never hurts but in reality the issue you're suffering is simply a matter of gearing in my opinion. Of course if you have more rotational mass you are going to notice a loss in power, but in terms of putting 35s on with even 4.10 gearing, The issue shouldn't be power. I think the problem your experiencing most likely is not due to higher rotational mass. I believe you're going to notice a tremendous difference by regearing your Jeep. Maybe going to something like a 5.13 gear set. A lot of people(maybe not you) throw a cheap lift kit on a Jeep destroy the ride quality and put a lot of stress on the engine and transmission because they don't regear and fix geometry changes when they lift their Jeep. You put bigger tires on even just a couple of inches bigger chances are you've changed your gear ratio to a point where your vehicle is going to feel significantly more sluggish. When you put a lift on you change all the geometry of the Jeep and often times this causes wandering and sometimes it ends up resulting in death wobble and a whole slew of other issues related to driveline. Of course a couple of inches you're probably not going to notice that much of a difference if you've got adjustable trailing arms and have taken your Jeep to an alignment shop to have them adjusted properly, but on our Jeep Wrangler(4.5in lift) when we got it it was awful to drive, The shocks were terrible, All of the steering geometry was out of whack and it had bad ball joints on top of that. So after putting it nearly $5,000 in teraflex front end parts it drives like a dream. The only thing left to fix is the cheap shocks that came with the cheap lift kit. So take it from me If you'd like to lift your Jeep do it the right way, You're going to be so much more happy with the results and more comfortable driving it to far away places. No one likes a Jeep that wanders into other lanes or can't get out of its own way. I understand doing it the right way can oftentimes result in a lot more money spent and if that's the case well I can understand people trying to just get by with a cheap lift kit and upgraded as you go but just know what your getting into. Sometimes the best left kit is the one that you build on as you go. So when you go around town telling your friends and buddies not to get a Jeep and lift it because you've had a bad experience with it just know that when a lift is done right it rides like factory, or close.
Had the same problem with my 2005 jeep wrangler unlimited. 4inch suspension lift with 33s. Put in cold air intake and exhaust nothing worked. Then I regeared it. Put in 4.56 gears and the power came back. Guys make sure you regear it once those big tires come on.
A lot of $$$ for little gain you will never notice. Got a good sound out of it.
Sounds amazing
If you change the exhaust headers, exhaust pipe and add a air airintake. Which is the best option to do any order works
I think more gains could have been done by re-gearing, I’d be curious what the numbers of that would be. Love your content!
Dyno tuning is done in your 1:1 gear ratio
@@djdiheheidifhdhdje261 4gear, correct. But there is the final drive ratio in your differential that has a big effect.
@@djdiheheidifhdhdje261 he’s talking about rear differential. 35’s need a 4.10 ratio or 4.56. Stock is 3.20. The gears spin the same with larger tires making it slower. Larger ratios are needed for bigger tires. Otherwise it’s a 25 second to 0-60.
new cool air & exhaust dyno 7 & 8 hp & torque bump cool across range no reprogramming from stock. God not worth it on good muffler but when replacing sure go bigger. The freeier cold air seems no brainer esp in hot climates
wouldn't regearing to 4.56 gears alleviate the acceleration reduction?
4.88 a little better 😁
Lesneski is the man.
Hello all you crazy Jeep owners! 😜👍 I finally bought a Jeep!! Just thrilled - got a 2014 Wrangler with 33's and a lift, and caught the bug ! My head is on a swivel going down the road looking at every cool Jeep mod that goes by. I'm sure a couple folks must have had their fingers ready to call 911 as I inspect their beautiful beast! HA! Took my son to Memphis and then Little Rock over the weekend - was having a great trip, until I noticed I was struggling to keep up with traffic. She was okay at 75, maybe 80 when passing others, but when I had to slow for traffic, it took some effort to get back to speed. Definitely looking to add some upgrades for even a little more oomph. Any additional suggestions are very much appreciated! This one looked like a fairly quick way to grab a few HPs. Thank you!
I like this video get Straight to the point
I definitely like the sound and the horse power gain is nice as well. Not to happy with the air box. You hit water and you have water in your engine. The stock box is better at keeping water out of your engine.
I am serious considering buy a jeep but I am wondering about it’s reliability What year is this jeep and why did you choose manual transmission over automatic transmission
Love the sound .. 👍Is there any difference in mileage after installation?
I have a 19’ 2 door sport and it’s surprisingly powerful ... anyone else experiencing a rather fast Jeep in the newer models?
which year do you have? thx
@@obsessivegarage921 2019 sport
thanks for the video, nicely explained and filmed! wondering if there are any insights into MPG change and emissions pre/post install?
How is the dreaded droning on the highway with these 2 modifications?
Thanks for the video. Good stuff. What was the cost per horsepower break down?
I have a 2016 with manual transmission and notice the low torque at lower rpm around 1500 to 2000. It looks like the bottom end where the 3.6 really needs it saw a healthy boost, but it’s hard to see the details in the video. How was the drive ability improved down low?
Absolutely needs a regear 4.88s minimum
Damn, you could climb a wall with the gearing
Its a 3.6 not 3.8
Thanks for the video. Maybe I'll give this a try.
Thanks for watching!
man, that is very nice, im looking to do that as well after bumping up to 33s. so thats a dry filter, not one you have to lube up right? is it cleanable?
Greetings from a fellow NC Jeeper... That exhaust sound though!! 🤘🤘 They make those for the TJ models?
Add e3 spark plugs i swear by them my buddy did nothing but change his plugs to e3 at the track and shaved a full second off his 1/4 mile time. I run them in my rides and bikes too.
Snorkel +10hp
12Gw light bar +15hp
Hood mounted high lift jack +5hp
Rooftop tent year round +8hp
Angry Eyes +infinity
IMPRESSED! NICE GROWL BUBBA, GOOD WORK & VIDEO!
Are you thinking about changing the intake manifold?
Smart video, I haven't done the air box mod because of possible water intake when fording. This video should be a template for all wannabe Jeep videographers.
What was the total cost of this upgrade?
I was surprised the battery was not disconnected before adding cold air intake.
Do it Tay!
Shorty headers would have helped even more....Thanks man...!
Probably not on these, they only have one exhaust port/head. The header/manifold is cast into the head. A lot of manufacturers do this now.
Love to see more JK videos!
Thanks!
What size lift do you have and brand, also what brand of tires, your stance and look is perfect.
I dunno his but mine looks similar-ish
3.5 in lift
bfg ko2s 35s
planning on getting km3s 35s
Thank you man, good to know about this parts
How about adding a throttle body spacer too?
I know this is kind of an old video but I was wondering how you like the wheels on your Jeep I just got them on mine and then found out their cast and I was worried about cracking and potentially off-road have you had any issues?
what about the gear ratio, I have 37 tires and 5.13 gears and my jeep feels powerful, and the pick up is damn fast for a jeep, your exhaust does sound nice.
Always gear first.
It does mean a huge difference when you know big tires and rims my brother his is stock and I have a big lift and tires and rims and I has a cold air intake and headers but still want more power I thought about seeing if a tuner or chip would make a difference but with the big heavy bumpers and roof rack add more weight but I'd love to just put a v8 in it but has to be ways to pull more power out the v6
2:09 ahh the clutch sound
Did it also improve your mpg and how much of a difference did you feel taking off did it not feel as sluggish as before
Dude great video
Thanks! And thanks for watching!
Talk about departure angles lol check that brake line stretch! Haha
Now it sounds like Nissan 350Z!
Different gears in the back would have helped more. Plus u need to tell the ECU about ur wheels upgrade
Snorkel is true cold air
I noticed your dif plate was different in the upgrade video of your exhaust. Did you re-gear as well?
My jeep seems lacking in power and I have brand new spark plugs and wires, cold air intake, catalytic converters, and no muffler and it still seems like nothing changes
0:18 I can relate...😂