Hey Louis. I have a 2014 polaris ranger 570 with 3/8 studs. I had a set of wheels from a 2016 rzr 900 trail given to me but they have 12mm studs. In order to run them I require a spacer for the rear so I figure I may as well buy them for all four corners. But I'm still left qitgthe problem of jumping from a 3/8 stud up to a 12mm. Can I remedy this issue safely or should I just stick with my stock wheels?
Kyle Clayton I know there are spacer out there that do change studs sizes and bolt patterns or what ever you need I've seen them at HighLifter so I'm sure they can get them here too. I also know that they aren't cheap some depending on what you need them to do are as much as wheels
I wanna put a set on my brute force 750 man it’s so unstable do you think 2 inch spacers on the brute with factory wheels will cause axle or bearing damage ??
So I have a 2017 Honda TRX250X and I’m looking to buy a set of these. As a normal trail riding person(some narrow, some wide trails) who simply wants a wider and more stable machine, is it worth the extra stress on the rear axle? Also, how much does this shorten the life of the rear axle?
Ive got some 4/115 with 4/110 for my rear and they do handle lot better and I love changing my wheels over for any riding conditions on dirt,sand,grass,rocks,lake crossings
Can I get away with running 2 spacers together? I have a set on some wheels I bought and I need to get a 1" wheel adapter to fit my application to get the proper width clearance.
I run spacers on everything weather I need them or not for a wider foot print. It might put a tad more stress on wear parts but if your in the off road world ya pay to play.
Added 1 inch spacers on my XMR. I was surprised at how much better it felt in off camber situations by just adding 2 inches to the width.
"you can always get things done boys" 😂 lots of good.. And bad stories have started with phrases like that. 😏
Hey Louis. I have a 2014 polaris ranger 570 with 3/8 studs. I had a set of wheels from a 2016 rzr 900 trail given to me but they have 12mm studs. In order to run them I require a spacer for the rear so I figure I may as well buy them for all four corners. But I'm still left qitgthe problem of jumping from a 3/8 stud up to a 12mm. Can I remedy this issue safely or should I just stick with my stock wheels?
Kyle Clayton I know there are spacer out there that do change studs sizes and bolt patterns or what ever you need I've seen them at HighLifter so I'm sure they can get them here too. I also know that they aren't cheap some depending on what you need them to do are as much as wheels
How big of a spacer would i need for a 2019 king quad 500 on a 2 inch lift with 27's?
I wanna put a set on my brute force 750 man it’s so unstable do you think 2 inch spacers on the brute with factory wheels will cause axle or bearing damage ??
So I have a 2017 Honda TRX250X and I’m looking to buy a set of these. As a normal trail riding person(some narrow, some wide trails) who simply wants a wider and more stable machine, is it worth the extra stress on the rear axle? Also, how much does this shorten the life of the rear axle?
Check out this video about an attachment that's makes it so you can drive an ATV on water. ua-cam.com/video/oxkDGuU0tTc/v-deo.html
Ive got some 4/115 with 4/110 for my rear and they do handle lot better and I love changing my wheels over for any riding conditions on dirt,sand,grass,rocks,lake crossings
So what do they need to be torqued at. Haha. You never said anything about it 🤣🤷🏻♂️
Ya I never do - too many different torque values
Can I get away with running 2 spacers together? I have a set on some wheels I bought and I need to get a 1" wheel adapter to fit my application to get the proper width clearance.
check and tighten the nuts often.
Can you do a video of a rad relocate on a renegade XMR. I’m curious on how you would run the rad hoses
Khai skebo🤮
I run spacers on everything weather I need them or not for a wider foot print. It might put a tad more stress on wear parts but if your in the off road world ya pay to play.
The smaller the spacer the less stress it will put on?
Tim Ellis yea forsure, inch spacers would be less stress then say a 2-1/2-3” for sure
Tim Ellis I run inch on all my builds
@@catjackoff-road855 that's what I was thinking I own a raptor 700 and it is top heavy was thinking about get 1 inch spacers
Do these make the back end slide more ?
Do you sell flanged spacers Louis?
Carter must b a 5 yearold.
First