This guys video FINALLY helped us to fix our Epson 4760. The black ink stopped working after we refilled it with a highly rated Amazon brand ink. It almost ruined our printer. Stick with the genuine Epson inks because the Epson eco tanks are finicky with the ink they will use. I was able siphon the bad ink out with a syringe. Thank you for making the video!
Thank you so much!!! I've been devastated because I needed to change my black ink in my ET4760. I didn't remove the cable but I was able to pull all of the ink from the printhead like you did!
I had a color clogged and no epson cleaning or flushing worked, epson customer service was unhelpful at best. I didn't know how the printer was build so I couldn't take it apart. This video literally saved my ass, I flushed the cartidge, refiled it and it's working perfectly now! The only different thing in my model was the annoying lever that doesnt let you open the printer more than 5cm and the plug on top of the cartiges, but I managed to pop off the side panel without breaking the plastic pin and got around that. Thank you for saving me money since I was about to buy a new printer lol.
Hi I have the same printer but in Australia it is the Epson ET-2810 and we are having trouble lifting the top of it up. We have undone all the screws like you did.
I did everything like you did on the video I drained it out but now my printer's not printing in color just some black & white. What can I do to fix this
ET-2810 eco printer ink is not flowing into the tank purchased last year .I have tried everything so far but the ink is just not flowing from the bottles to the tank. Help!
There is literally nothing coming out, like barely any ink and the tank is full. And when I pulled sone out and took the syringe out it also got ink all over the tube and probably in the printer, so idk if thats an issue.
Hello, can you give the link to these syringe nozzle adapters, I searched on amamazon UK and FR but couldn't find them! Thank you very much for your help...
I accidentally put magenta in the cyan tank, with the magenta tank already full of magenta as well. It was printinf normally for a little bit, considering I had some cyan left in the tank, but not a lot, hence why I was refilling it, but I accidentally put the magenta in. Now my prints are pinker. Idk if I should print multiple pages of magenta or cyan to get the magenta out of that tank. Does the printer recognize the color or does it just immediately take the color out of the specific color ink tank thinking it is that. So if I print cyan, would it take the ink out of the cyan tank, even though it is magenta ink in. There was some space for more ink in the cyan tank from where I've still been printing normally and I'm just filling it with some cyan to see if it helps. Edit:nope. Now I'm stuck with 2 full ink tanks of the wrong color and the printer isn't taking any ink from either one. It's acting like they are just empty. I was just gonna use up all the ink, but that didn't work and now my printer is also saying things in the printer are at the end of their service. I looked up that and only found things about the ink waste pad. Could you or do you have a video covering that? Edit: Okay, so yours is definitely different than the 2400, wven though they looked very similar. I only saw one screw on the left side, but nowhere else. I now don't know how to take off the cover and am stuck. I really wanna get this fixed. I print a lot and this is obviously beginning to be a problem for me. And about ink waste pad, I think I found where it is at. It's on the right side on the back. I haven't unscrewing it yet and looked, but it seems to look like thats where it is.
On the front of my printer, all inks are showing from ¼ to ¾ full. Black is lowest. Did a print out and the cyan is not coming out. It was working fine 2 weeks ago... what do I do?
you will have residual ink left in the tubes and in the tanks. There could also be sediment left in the tanks because they're made totally differently.
Hi. I have this printer and I took out the cartridges and cleaned the print heads. I also pulled some the ink from the tank to make sure i didnt have a clog there as well. My blue was clogged. I reassembled but now the ink from the tanks dont seem to reloading the cartridges. I am wondering if i stretched the tubes like you just talked about or if there is another issue. If i have stretched it. Is there enough play to remove the very end for tighter fit
Can you please tell me what type of ink Epson l3150 come with free ? I used sublimation ink with dark transfer paper and it doesn't give good results so I want to switch ink. Should I switch to the ink that Epson printer came with ? Or Idk it is dye or pegment based ink so I'm confused 🥲
On another issue, I have run the cleaning processes a number of times but the Magentas ink just would not print and the rest of the print is also very poor quality. All tanks are nearly full
I setup my ET-2400 Last night and I did a print not so long ago and I notice a flood of black ink on a section of the paper any help or suggestions on how to correct that?
I have just made the leap from cartridge to eco tank all-in-ones. When I replace the stock ink with CIE's do I have to wait until the particular ink tank is empty? Is it possible to accidentally overfill a tank?
I can buy a used epson et2750 for $100 bucks, but he says it needs to be cleaned. Is there something that should be ran thru to clean it? Is it worth buying and cleaning?
Hi, I’m wondering would it be the same process to drain ordinary ink out and refill with City Ink Sublimation ink would this be a complete flush out with head cleaner or drain/fill and prints number of items off first please
Hi I have the ET-2810 and I’ve emptied the ink as you’ve done and put my new ink in but the ink isn’t working at all niw Is there anything I can do for the cartridges to fill up Thanks Ruth
I bought this printer ua-cam.com/users/postUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 to replace an aging HP printer. It is just used for casual home printing so I don't need anything more. Installation went easily though the HP Smart Printing doesn't work well with our laptops - having to select the actual device. Will have to see how the HP Instant Ink program works out. Plus haven't been able to set up printing from smartphone yet - either direct or WiFi
Can you exchange the EcoTank ink for Hard Solvent Inks? I am aware this will corrode some parts of the printer and render the printer useless after six months, but I am happy to take this risk.
@@morganc.m1830 It would outweigh the benefits of being able to print on the vinyl material. The benefits are the large profits. However, since this was posted a year ago, I have got a manufacturer to develop a Vinyl that is printable with non-solvent inks. There are other inkjet printable types of vinyl but my vinyl has air channels (bubble-free) with removable adhesive. In fact, I now sell this vinyl as my own brand.
I mistakenly put the standard ink in, instead of sublimation ink. After removing the ink, will I need to flush the reservoirs before adding the sublimation ink?
is there a flush fluid we could use to clean the tank with? Great video btw, I wished I came across you first, as the people we bought our printer from are f****ing useless. We have the Epson L3111 which looks very similar to the one you are using.
Have you ever swapped out sublimation ink to echo solvent water-based ink in an Epson eco-tank 15000? I was told by a few people that it will tear up my printer. If you have any tips or tricks please let me know. I did watch the whole video and it gave me more hope then I had a little while ago. Thank you for your video!!
@@simmelprints No,I just bought another one because it will lock up your printer from what I understand. I’ve been told if any of the 2 inks come together it actually turns to gel and it ruins your printer.
I did the exact same thing. Why on earth would they sell a SUBLIMATION printer, without SUBLIMATION ink lol But have you gotten a chance to try it? Did it work for you?
Where he says you could pull the ink from but would take longer, I put the syringe there and sucked the ink just enough to get the ink flowing in there again and that worked for me.
@@aliciafowler4320 I done the same replaced it with sublimation ink and it’s not flowing into the rear cartridges and isn’t printing. I don’t know what to do next
@@chrissyhoyle5799 Did you ever find out how to re-charge the rear cartridges from the main tanks? (reservoirs) The Epson 2800 series only gives you a "one time only" option to charge your cartridges from the tanks when the unit is brand new.
You got to be kidding me. WHO designed this trash. I just threw mine in the dump. The black ink in the reservoir was dried and wouldn’t pump through. I’ll never use this brand again.
This guys video FINALLY helped us to fix our Epson 4760. The black ink stopped working after we refilled it with a highly rated Amazon brand ink. It almost ruined our printer. Stick with the genuine Epson inks because the Epson eco tanks are finicky with the ink they will use. I was able siphon the bad ink out with a syringe. Thank you for making the video!
Could you please post the link for the the syringe nozzle adapter? Please and thank you!😊
Thank you so much!!! I've been devastated because I needed to change my black ink in my ET4760. I didn't remove the cable but I was able to pull all of the ink from the printhead like you did!
Thank you so much for sharing this video. With your help I was able to successfully remove the ink from my Epson 2800! Truly appreciate you! ☺️ 🙏🏽
Where do you get the syringe with the attachment
I had a color clogged and no epson cleaning or flushing worked, epson customer service was unhelpful at best. I didn't know how the printer was build so I couldn't take it apart. This video literally saved my ass, I flushed the cartidge, refiled it and it's working perfectly now! The only different thing in my model was the annoying lever that doesnt let you open the printer more than 5cm and the plug on top of the cartiges, but I managed to pop off the side panel without breaking the plastic pin and got around that. Thank you for saving me money since I was about to buy a new printer lol.
How do you flush the catridge
Hi I have the same printer but in Australia it is the Epson ET-2810 and we are having trouble lifting the top of it up. We have undone all the screws like you did.
Did you sort this? i am having the same problem
I just physically broke the piece off. Too restricting and unnecessary.
I did everything like you did on the video I drained it out but now my printer's not printing in color just some black & white. What can I do to fix this
Hi mine is a 1810 and only has 1 screw left side but can not connect the lifter on the left to fully open
ET-2810 eco printer ink is not flowing into the tank purchased last year .I have tried everything so far but the ink is just not flowing from the bottles to the tank. Help!
Do you have a video on how to remove ink from an ET-2851 please.
There is literally nothing coming out, like barely any ink and the tank is full. And when I pulled sone out and took the syringe out it also got ink all over the tube and probably in the printer, so idk if thats an issue.
My lid won’t open all the way. There is a lever on the left side front . How do I get it to let go? It’s exactly like this printer
Can you remove fresh sublimation ink et-7750 to put in a new replacement printer?
I completed all of the steps, however the new black ink is not printing yet. What do I do?
I have a 2720 but I can’t get my ink to charge back into the lines or cartridges. Any suggestions? TY
Hello, can you give the link to these syringe nozzle adapters, I searched on amamazon UK and FR but couldn't find them! Thank you very much for your help...
where do you get the syringe nozzle adapters.
I accidentally put magenta in the cyan tank, with the magenta tank already full of magenta as well. It was printinf normally for a little bit, considering I had some cyan left in the tank, but not a lot, hence why I was refilling it, but I accidentally put the magenta in.
Now my prints are pinker. Idk if I should print multiple pages of magenta or cyan to get the magenta out of that tank. Does the printer recognize the color or does it just immediately take the color out of the specific color ink tank thinking it is that. So if I print cyan, would it take the ink out of the cyan tank, even though it is magenta ink in.
There was some space for more ink in the cyan tank from where I've still been printing normally and I'm just filling it with some cyan to see if it helps.
Edit:nope. Now I'm stuck with 2 full ink tanks of the wrong color and the printer isn't taking any ink from either one. It's acting like they are just empty. I was just gonna use up all the ink, but that didn't work and now my printer is also saying things in the printer are at the end of their service. I looked up that and only found things about the ink waste pad. Could you or do you have a video covering that?
Edit: Okay, so yours is definitely different than the 2400, wven though they looked very similar. I only saw one screw on the left side, but nowhere else. I now don't know how to take off the cover and am stuck. I really wanna get this fixed. I print a lot and this is obviously beginning to be a problem for me.
And about ink waste pad, I think I found where it is at. It's on the right side on the back. I haven't unscrewing it yet and looked, but it seems to look like thats where it is.
how many millimetres the green syringe green nozzle adaptor should be? 1 or 2.2mm? trying to order one online but not sure which one to select?
Thank you so much for the video. I was so proud of myself for putting the ink in my new printer until I realized I put the wrong colors in
On the front of my printer, all inks are showing from ¼ to ¾ full. Black is lowest. Did a print out and the cyan is not coming out. It was working fine 2 weeks ago... what do I do?
Epson EcoTank 1500 put yellow ink in the Cyan (brand new printer which has never printed) can I get the yellow out? I want to cry...
What size gauge and length did you use for the adapter? I accidentally put cyan where black is supposed to be. So mad at myself.
I am looking to switch back and forth between regular ink and sublimation ink as needed. Can you advise an attachment to do this.
you will have residual ink left in the tubes and in the tanks. There could also be sediment left in the tanks because they're made totally differently.
Terrible idea
Hi. I have this printer and I took out the cartridges and cleaned the print heads. I also pulled some the ink from the tank to make sure i didnt have a clog there as well. My blue was clogged. I reassembled but now the ink from the tanks dont seem to reloading the cartridges. I am wondering if i stretched the tubes like you just talked about or if there is another issue. If i have stretched it. Is there enough play to remove the very end for tighter fit
I am having this same issue. What was your solution?
Can you please tell me what type of ink Epson l3150 come with free ?
I used sublimation ink with dark transfer paper and it doesn't give good results so I want to switch ink.
Should I switch to the ink that Epson printer came with ? Or
Idk it is dye or pegment based ink so I'm confused 🥲
the ink that comes with them is not sublimation ink its normal everyday ink
@@cityinkexpress-online which ink would you recommend for l3150
On another issue, I have run the cleaning processes a number of times but the Magentas ink just would not print and the rest of the print is also very poor quality. All tanks are nearly full
I setup my ET-2400 Last night and I did a print not so long ago and I notice a flood of black ink on a section of the paper any help or suggestions on how to correct that?
When i pull the ink through syringe into the damper, it's coming, but when I take out syringe, it goes back into the ink tank. What's the problem?
Is there a tutorial on how to replace/remove the ink from the refilling tank itself?
Where can I get the adapters and syringe?
That is what I looking for
What model is this
I have just made the leap from cartridge to eco tank all-in-ones. When I replace the stock ink with CIE's do I have to wait until the particular ink tank is empty? Is it possible to accidentally overfill a tank?
Hi I did the steps you showed in the video and on my 4th head clean it's still showing up as a warning sign on the app help please 🙏
I can buy a used epson et2750 for $100 bucks, but he says it needs to be cleaned. Is there something that should be ran thru to clean it? Is it worth buying and cleaning?
Hi great video. Can I covert from dye base ink to pigment ink using this method?
Question: what to do if the translucent cover on the ink tubes was cut? 😭
Hi, I’m wondering would it be the same process to drain ordinary ink out and refill with City Ink Sublimation ink would this be a complete flush out with head cleaner or drain/fill and prints number of items off first please
Yes its the same process and just run a few prints off no need to flush
@@cityinkexpress-online thanks for the mega fast reply, I’m doing it in the morning now thankyou
Hi I have the ET-2810 and I’ve emptied the ink as you’ve done and put my new ink in but the ink isn’t working at all niw
Is there anything I can do for the cartridges to fill up
Thanks Ruth
I am having the exact same issue - Does anyone have any advice ?
I bought this printer ua-cam.com/users/postUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 to replace an aging HP printer. It is just used for casual home printing so I don't need anything more. Installation went easily though the HP Smart Printing doesn't work well with our laptops - having to select the actual device. Will have to see how the HP Instant Ink program works out. Plus haven't been able to set up printing from smartphone yet - either direct or WiFi
my problem is the ink is new and every time I print it doesn't show color, Im so unsure how to fix.
Have the same problem 😢 did you manage to fix it?
Pls can u assist my inks are not charging in my new l3210 what can i do
Having the same problem 😢 did you manage to fix it?
I did this and now it won’t print anything, what do I do?
Hello, can you please tell me where to get the syringe nozzle adapter? Thank you!
Just google syringe nozzle adaptor
Can you exchange the EcoTank ink for Hard Solvent Inks? I am aware this will corrode some parts of the printer and render the printer useless after six months, but I am happy to take this risk.
Gonna buy one and try it myself lmk how it goes for you
Why would you buy one of these expensive printers just to only have it for 6 months?
@@morganc.m1830 It would outweigh the benefits of being able to print on the vinyl material. The benefits are the large profits. However, since this was posted a year ago, I have got a manufacturer to develop a Vinyl that is printable with non-solvent inks. There are other inkjet printable types of vinyl but my vinyl has air channels (bubble-free) with removable adhesive. In fact, I now sell this vinyl as my own brand.
I mistakenly put the standard ink in, instead of sublimation ink. After removing the ink, will I need to flush the reservoirs before adding the sublimation ink?
I didn’t, but I did do allot of prints before adding the sublimation ink to get as much of the other ink out as possible.
How do you flush the system? None of my colors work
Or better i will used it all the time to make it empty so i can carry it and travel. U think is that ok idea?
SOS., people my ink do not going to inner ink what can i do?> inner ink is empty
Where are you from can you do mine?
is there a flush fluid we could use to clean the tank with? Great video btw, I wished I came across you first, as the people we bought our printer from are f****ing useless. We have the Epson L3111 which looks very similar to the one you are using.
You wont need to flush using this method
Thank you, I had a look at your website........ do you sell the syringes and ink because I think we will go with you
@@crmusicproduction drop us an email and we will send you them for free
@@cityinkexpress-online what size are the srygines and where can I get them
Thanks for the tutorial, I was sold the wrong ink in a custom bottle by a ink shop ugh
Have you ever swapped out sublimation ink to echo solvent water-based ink in an Epson eco-tank 15000? I was told by a few people that it will tear up my printer. If you have any tips or tricks please let me know. I did watch the whole video and it gave me more hope then I had a little while ago. Thank you for your video!!
Did you swap out the inks yet? I'm looking to go from Eco Solvent to Sublimation but too scared it will damage the printer
@@simmelprints No,I just bought another one because it will lock up your printer from what I understand. I’ve been told if any of the 2 inks come together it actually turns to gel and it ruins your printer.
I am wondering the same thing. I want to run cleaning solution through it a few times and see
@RVincents did that work for you? I'm needing to swop inks now
I changed it, and the printer is not printing anymore. Just blank sheets
CNt you just swith the hoses.
Would this same process work to remove the ink the printer comes with to switch to sublimation ink ? Or will there be problems
I did the exact same thing. Why on earth would they sell a SUBLIMATION printer, without SUBLIMATION ink lol
But have you gotten a chance to try it? Did it work for you?
I want to use my ET-2400 printer with Sublimation Ink. So I can empty the tanks like this and then refill with the new ink.
That’s what I want to do as well
Swapping?
My ink has stopped flowing I'm.to one of my cartridges how do I sort that problem out.and my.in is full in the tanks
Where he says you could pull the ink from but would take longer, I put the syringe there and sucked the ink just enough to get the ink flowing in there again and that worked for me.
@@aliciafowler4320 I done the same replaced it with sublimation ink and it’s not flowing into the rear cartridges and isn’t printing. I don’t know what to do next
@@chrissyhoyle5799 i just did the same thing myself and am having this same issue. Have you had any luck since this post?
@@yajairafigueroa982 no and now it’s showing a scanner error and apparently nobody I know works on them. I’m beyond frustrated!!
@@chrissyhoyle5799 Did you ever find out how to re-charge the rear cartridges from the main tanks? (reservoirs) The Epson 2800 series only gives you a "one time only" option to charge your cartridges from the tanks when the unit is brand new.
Thank you pooo ❤❤❤
Thank you!
y
*swapping :)
Swopping.
god this is awful..but thank you for the help!
You got to be kidding me. WHO designed this trash. I just threw mine in the dump. The black ink in the reservoir was dried and wouldn’t pump through. I’ll never use this brand again.