If you're dismantling the engine I'd have gone for the big bore 310cc conversion kit, replacement head and piston, just bolts straight on in place of the original.
The internal workings of still a fairly simple engine always amazes me and the engineers who designed it. Every little washer, gear, fitting, spacer, contour, bearing, spring, etc.
Counter shaft seal has to be fitted with the cases apart - yours isn’t ( and it’s vital to gearbox oiling , it’s not just an oil seal like most are ) . Also the main shaft locating dowel isn’t fitted - that’s also not just a dowel , it’s also an oil feed . Good luck if you want the gearbox to last .
How certain are you that fitting the counter shaft seal with the cases together is a no go? Reason I ask is because I'm doing the top end only on an '83 xl250r now and was thinking to change that along with every other accessible seal. I won't do it if it won't seal. I have the seal and it had a lip that would lock it into the case halves, but it seems like it would grab if inserted after the fact too. Thanks.
@@mmtunphilly if it’s the RFVC engine then it’s okay . If it’s the early one ( same as in the 250s ) then not really . The seal has a locating lip that has to be ground off to stand any chance of going in , but even then it usually buggers the seal trying to get it in and the final position is critical ( that’s why they have the lip in the first place )
All that slop at the end of the camshaft is not good. SOHC Hondas are susceptible to this if run without regular oil changes. Otherwise good work on renovating a faithful engine!
This would be a great video if he EXPLAINED tf he was doing 🤦🏽♂️. Some of use take an interest and want to learn. There’s no videos out there for this 😢
Познавательное видео-инструкция по разборке и сборке двигателя.Классная компрессия!Ногой в тапочке с пол-тыка заводит!Главное -цилиндр покрасить, расточка и хон цилиндра-дела второстепенные.
muito boa !!mas ele erro na hora de fecha as cabeças do meio nu eixo secundário tem uma bucha q se encaixa em um pino guia !!ele n emcaicho u pino na bucha
I know, after we’ve spent all of that time and effort rebuilding the engine, let’s rev the bollocks off it when we first start it up!
If you're dismantling the engine I'd have gone for the big bore 310cc conversion kit, replacement head and piston, just bolts straight on in place of the original.
Buen trabajo amigo tambien quiero arreglar la mia asi
very helpful, once again very useful, thank you friend
Para cuando una restauracion de una Honda nighthawk 250? ; un Saludo desde mexico.
Really great. Thank you for sharing !!!!!!!
super
Success 👍
Great Job :) what paint You used to paint engine ?
All your engine teardowns look the same. I didn't watch and I don't care! It just looks like edited BS. I like the total builds, before and after.
The internal workings of still a fairly simple engine always amazes me and the engineers who designed it. Every little washer, gear, fitting, spacer, contour, bearing, spring, etc.
It's just single pot but look how complicated this engine is from honda! 😒
Well done. You've done a great job especially remembering how it all goes back together!
awesome job guys looks and sounds fantastic you guys are the best great video thanks for sharing all the best
I’m also restoring my 1983 XL250r this will be great when I get the engine back together 👍🏻 thanks
Please suport kuya Bert Tv official the PWD vlogger from Manila keep safe always God bless you and your family 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Can't wait to see the bike.
Iioppp0
Counter shaft seal has to be fitted with the cases apart - yours isn’t ( and it’s vital to gearbox oiling , it’s not just an oil seal like most are ) . Also the main shaft locating dowel isn’t fitted - that’s also not just a dowel , it’s also an oil feed . Good luck if you want the gearbox to last .
How certain are you that fitting the counter shaft seal with the cases together is a no go? Reason I ask is because I'm doing the top end only on an '83 xl250r now and was thinking to change that along with every other accessible seal. I won't do it if it won't seal. I have the seal and it had a lip that would lock it into the case halves, but it seems like it would grab if inserted after the fact too. Thanks.
@@mmtunphilly if it’s the RFVC engine then it’s okay . If it’s the early one ( same as in the 250s ) then not really . The seal has a locating lip that has to be ground off to stand any chance of going in , but even then it usually buggers the seal trying to get it in and the final position is critical ( that’s why they have the lip in the first place )
All that slop at the end of the camshaft is not good. SOHC Hondas are susceptible to this if run without regular oil changes.
Otherwise good work on renovating a faithful engine!
hey guys! 1st of all, great work. and 2nd, where did u bought the new parts?
This would be a great video if he EXPLAINED tf he was doing 🤦🏽♂️. Some of use take an interest and want to learn. There’s no videos out there for this 😢
buenas, muy buen trabajo, tengo una igual y quiero repararla, si me puedes compartir la tabla de los torque que utiliza, gracias
Hola conseguiste la tabla de torques?
super super super i have 250r paris dakar bike
Hey i got a question, I have a 1983 Honda XL 250R, have they the Same Kickstarter Wave ?
Mucho silicon por todo lado, no es necesario con los empaques nuevos, Trabajo bien echo pero no se ve fino ese trabajo!!!
Tenho uma XL 250r ano 1983 azul, gostaria de restaurar a minha, alguem sabe onde restaurar?
Bueno dias soy de Colombia donde puedo comprar repuestos para mi honda xl 250s
Hi! Can you help me order parts for my xl250? Thanks!
Motor Ficou 0 km '" Parabens aos mecanicos!* aqui e do BRASIL 2021.
What liquid do you use for cleaning the parts?
Fantástico.I had a Xl 250 r,good times.
बजाज 100cc डिस्कवर रेस फुल करने बाद काला धुवा आता है
Hello friend, i need a manual of Honda XL 250 model 1978.
0:26 necesito repuestos para mi honda xl 250r
Como ke liga fio da bobina de pulso ke fica do lado da tampa da embreagem
Where did you find all of the parts to do this rebuild
Pro
Consulta que bobina de alta es compatible de que modelos.
In video, You use 1/4 sliding T or 3/8 Sliding T wrench?
hindi ko na kayang isipin yan.. rebore lang ang alam ko
XL 250S engine ekth meekami neda aiye?
Mulu bike ekama hadanawada ayye. Hadanawanam video eka danawada?
Hola me podrías ayudar en el orden de cables del CDI
what do you use for sandblasting and how much pressure
This engine is the same with cl250 '83?
Muito bem...
මගෙත් එන්ජින් එකක් තියනව අයියෙ.....ගොඩ දාගන්න පුලුවන්ද
Bro මන් දන්නව මේක ලන්කාවෙ චැනල් එකක් කියල .. ඔයා කොහෙද ඉන්නෙ හම්බෙන්න
手際も良いし、環境も綺麗。私のCBX250Sエンジン分解の参考になります。ありがとう!(*^_^*)
watermelon engine,the nickname in my country
سلام خوي الزين لا كنت البع بصي نمر❤
Repair skills👍
where can i order spare parts of that
ඔයා කොහෙද මචන්
Познавательное видео-инструкция по разборке и сборке двигателя.Классная компрессия!Ногой в тапочке с пол-тыка заводит!Главное -цилиндр покрасить, расточка и хон цилиндра-дела второстепенные.
Точно! Трещины в корпусе рядом с балансировочным валом, ну и пусть! Сами зарастут.
Hey guys i have the same motor where did you buy that piston? And is your cylender stock?
La bobina captora como la puso
Esses caras sao muito bons no que fazem,nao e um passo a passo mas ajuda muito!
Отличная работа, парни! 👍👍
muito boa !!mas ele erro na hora de fecha as cabeças do meio nu eixo secundário tem uma bucha q se encaixa em um pino guia !!ele n emcaicho u pino na bucha
එනකල්ම හිටපු විඩියෝ එකක්..🤩🤩🤩🤩😘❤️✌️
Way you don't answer me
Ligô esse motor ? Cadê o cdi que nao ví ? Cadê a bobina de igniçao que nao ví ,vcs sao os caras mesmo heim ,video aceita tudo kkkkkkkk
Tive uma xl250 R 1984!!! Saudades!!
Excellent Excellent Excellent.. keep up....i.loveeeeee watching ur videos.. 2 d point.. no talking and simple..
Thank you brothers..
Fez errado na HR de colocar no tempo ele deixou os ressaltos do comando virados pra cima , o certo é pra baixo
zapakowałbym taki do swojego cafe racera :D
coloque un muelle blando en la valvula cuando vaya a esmerilar , asi sube y baja sola .
Where is your place
ya flip flops for sure
👍🏻👍🏻🌷💖💖💖🌷👍🏻👍🏻
Nice and clean!👍👍💪🔥
I have a hero honda hunk old one can i restore like this from you brother?
Brother send me your address. I'm going to post you some gloves
Proud Sri Lanka
Dinesh ayyalay gedara neda me. Matath bike eke enjin repair aka tynwa komada karaganne.
Boa noite tem como trocar o retentor do eixo do pião xl 250 r ano 82 sem desmontar o motor
а рокера где ?
You put a lot of old parts back into that engine.
Xl rs 250
what year
Piston?
😮❤😊🤟🏻
Yooo how much to rebuild my engine😂😂but really can we get a parts list on the new stuff you bought?
ආසාවෙන්ම බලන චැනල් එක...❤
Great Job, so many parts. Fan👍tastic
Nice
Simply Art, congrats 👏👏👏
As un video de xr250
Sensacional!
Nice ✅👨🔧👋👨🔧
muito legal
tenho uma moto com este motor
onde busco mais detalhes ??
සුපිරි 👍👍👍 ඕනෑම එකක්
How much price for this work?
Excellent work👍👍👍. Thanks for sharing
bro, can you do the chassis restoration?
Way you don't answer me Rofe
amazing restoration dear
අදනන් වෙන කෙනෙක් වගෙ
hello. where can I find the rocker arms
I have
@@danielamor3979donde puedo comprar un cilindro desde Colombia
great video ! what year is the 250r motor because i only see single carb?
Tem com 2 carb e com 1