watching you guys tear down and rebuild these engines is the best, i watched my future son in law try it and now he has a basket case, he was the one who turned me on to your videos and i been watching them since
i wish my mechanic can work with this attention to detail . . . . unfortunately we spend an arm and a leg and yet we never a 100% . . . . after watching this video i came to a realization that, the best satisfaction one can get , is by doing yourself . . . . brilliant video brother . . . Thanks for sharing the whole process !
Uhhh 😳 valla que si cuesta ver una moto 250 De 4 cilindros, Solo he visto una en persona en toda mi vida y es el sonido más satisfactorio que hay 👌 Buena restauración
@@randy606 negativo hubieron motores 250cc 4 cilindros pero fueron desclasificados por tener una gran ventaja ante los pilotos de motos en categoría 250cc hay pocas de esas hay en Kawasaki y honda también de echo 👌
Very nice, got gsf 250 myself and would like to ask if you changed any parts and what was your source for them? It is very hard to find parts for this bike.
Excellent video, and youve made a very good job on that motor, looks like you done that a few times. 👍 one of the exshaust pipes cut off and left in the engine, how did you fix this??
*I think the video is very interesting, I have seen the whole video and it is simple and understandable, I guess you don't show the adjustment of the valves because it takes a long time. congratulations.*
I am looking to buy a Bandit gsf250, since in my country they are quite well priced and I wanted to know what is the average useful life of your engine in km
How come he installed back all the pistons into silinder block then the head before the crankshaft? And we all see the old crankshaft's metal bearings that weared out still be reused again. Is the any other bearings, seal, etc are replaced with the new one? I'm curious about what's the true point and meaning of the word "engine full restoration" in this video. But anyway, nice cleaning and paint job. Well done 👍🏻 And sorry for my english.
Pause the video at 25-42, he's made a clutch cover gasket out of something, and none of his gasket surfaces are cleaned properly. I don't think I've ever left a negative comment on this type of video before, I'm all for being creative, but nobody should ever take this as an example of the right way to rebuild an engine, only work to these standards if you are desperate and have no options, and don't expect the finished job to last too long.
@@BR1883FC That's the problem for this bike, you can't find gaskets or original pieces nowhere, you have to be creative, i agree it should be cleaned properly
@@NagaManu90 If it works as well as a new gasket why is there white gasket sealer over every surface? This is a poor job and not a good example to put on the internet of how to repair an engine. Only work to these standards if you have no choice at all. And remember to clean your gasket surfaces properly.
watching you guys tear down and rebuild these engines is the best, i watched my future son in law try it and now he has a basket case, he was the one who turned me on to your videos and i been watching them since
බලන් හිටපු එකක්.වටිනවා ආසවෙන් බැලුවේ❤️ ගැම්මක් තමා❤️
My first bike was a bandit 250. Great to see you bringing one back to life.
Excelente amigo, a restauração mais detalhada do UA-cam 👏👏
Thank you 💙💙
Anda melakukannya dengan baik, ditunggu selanjutnya pak
A video I've been waiting to see for a long time!
i wish my mechanic can work with this attention to detail . . . . unfortunately we spend an arm and a leg and yet we never a 100% . . . . after watching this video i came to a realization that, the best satisfaction one can get , is by doing yourself . . . . brilliant video brother . . . Thanks for sharing the whole process !
for me this the best UA-cam channel in SL. Just the pure restoration sounds and work. proud of you guys.
Uhhh 😳 valla que si cuesta ver una moto 250 De 4 cilindros, Solo he visto una en persona en toda mi vida y es el sonido más satisfactorio que hay 👌
Buena restauración
No era 250cc era 400cc
@@randy606 negativo hubieron motores 250cc 4 cilindros pero fueron desclasificados por tener una gran ventaja ante los pilotos de motos en categoría 250cc hay pocas de esas hay en Kawasaki y honda también de echo 👌
Yo tengo una pero solo tiene un cilindro la 250 después tengo,una 600 el moto suena de maravilla ,esto será por los costes ?🏍🏍🏍🏍
Many thanks for this video, it's really hard to find help restoring these old Suzuki models !!
Master mechanics working in tandem😉 Beautiful job guys and video is edited to perfection.. Enjoying to watch😍
عالی بسیار تمیز 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👌🏼👌🏼👌🏼👌🏼👌🏼💯💯💯💯💯💝💝💝💝💝
Easy to overhaul/restore but the parts maybe its hard to find.You did it congrats bro🇵🇭🏁✌.
Do you know a webshop which sells parts for this bike? I need new intake boots but can't find it in stock
That paint booth looks like something I would done myself nice work on those small dirt bike engines.
not exactly a dirt bike tho
4 cylinder...it must be a monster bandit....weelll donee 👍👍👍👍👍
Very nice. Did you replace the valve guide seals? What's the Mikuni unit installed at 23:00? Oil pump?
නියමයි ලංකාවේ කොල්ලෝ...
Mantap om, kenek dingge inspirasi cah2 kene om👍👍👍👍👍
Wonderful watching an A grade mechanic. More please.
i had a 250v great bike. nice build👍
250cc w 4 garnkach :) super
Thank you...... for response to my comment... "bandit engine rebuild"
💙💙
Good restoration 👍
Thank you 💙💙
Very nice, got gsf 250 myself and would like to ask if you changed any parts and what was your source for them? It is very hard to find parts for this bike.
Woww nice repeyar bro 😍🤗
Buena restauracion, Saludos desde America Central, Nicaragua.
why are the washers/spacers put in before valve springs? there's none when taking apart on my GSF 250 16:05
Excellent video, and youve made a very good job on that motor, looks like you done that a few times. 👍 one of the exshaust pipes cut off and left in the engine, how did you fix this??
Good job i am regularly watch ur videos where are you from
@Kanchana Hashan yako maath lankave thamai kohedha oyala mn kalpana kara ax1 cb250 engine hadhana kota lankavedha kiyala dhigatama karagena yanna jade engine eka video ekak one. 👍👍👍👍
Nice work on what is now a very rare find 👍
It is a beautiful engine and an exceptional restoration. Congratulations!
Thank you very much!
well done team, very stunning restoration. just wanna ask how did you removed the flywheel? is there any special tool for it?
how comes u paint everything without using a primer?! the paint will last a month or so...
That's how they do it in Sri Lanka
@@SLBikers they doing it bad
I'm using heat resistant paint
@@rofe still needs primer...
*I think the video is very interesting, I have seen the whole video and it is simple and understandable, I guess you don't show the adjustment of the valves because it takes a long time. congratulations.*
Lo hacen ver tan fácil Y rápido el armado, saludos desde Veracruz, México ✌️🇲🇽
I am looking to buy a Bandit gsf250, since in my country they are quite well priced and I wanted to know what is the average useful life of your engine in km
Hey nice restoration (-: Do you know if the gj77a head gasket fits the gj72a? I can't find any for the gj72a )-:
I love watching you work. Makes me want to do this, myself. Wish I had the know-how. Keep it up guys!!! 👍
Піскоструєти зібраний двіжок, потім розбирати 👏👏👏👏
how long does it take to understand the placement of the too many parts?
ජය වේවා අයියේ😈🖤😕
Hello bro.. Can you please suggest where to buy Suzuki bandit 250 v 1999 model Carburetor ?
👍👍
good, are you from srilanka
Hi please kindly let me know where you can get the parts for this engine I also have one gxs250
No tenes el manual de despiece de Suzuki GS 500 cc de 52 cv ???
How come he installed back all the pistons into silinder block then the head before the crankshaft? And we all see the old crankshaft's metal bearings that weared out still be reused again. Is the any other bearings, seal, etc are replaced with the new one? I'm curious about what's the true point and meaning of the word "engine full restoration" in this video. But anyway, nice cleaning and paint job. Well done 👍🏻 And sorry for my english.
Very nice 👌👌👍👍 thank you very much
4 máy động cơ 2 thì nghe tiếng máy nổ chất thế nhờ
Nice work dude! But I don't understand why to lie? There is no any new cylinder sleeves..
Es una verdadera mano de obra extraordinaria,trabaja muy bien .
Good job brother ♥️🇱🇰💪
Hyosung GA125 ekk thiyenwa restoration ekata roughly wiyadama kochchara yaida kiyanna puluwn weida.
Are the engine parts available everywhere or what?
Eres increíble 👏👏👏
Very good job🤩
Great job bro, but you forgot to set clearance valve.?
Disassemble the motor and assemble it on garbage spare parts and without observing the technology. Bravo! Never do it like in this video.
De dónde es el q hace ese trabajo se ve impecable su manera de trabajar el motor tengo una zusuki 750 gsxr hipert SPORT casi el mismo motor
Fantástico trabajo!!. Cómo suena ese motor👍👍
අයියෙ සුපිරි වැඩක් පුලුවන්නම් Kawasaki D-traker එකක් Bild කරන්න පුලුවන්ද plzz ❤️🇯🇵🙏🙏
Ayye bentiye full review ekak oneee..✌️❤️🔥
Wow nice good job and careful
4:58 А где магниты на роторе генератора? что за магия, как он работает? ))))
Parabéns 👏👏
Brazil 🇧🇷🇧🇷
Nice video come again friend god bless ...
Sir, where are you from?
Bandit bike eketh video eka genna good luck 👍
Bike eke restoration ekth onii 🤩😍
Dear my Suzuki bandit 250 oil pan is leaking engine oil , what could be the problem plz help..
Контрактный двигатель из Японии 👌
Good 👍semangat
After seeing this ill only be lapping/grinding the valves on my GSF 250, going any further looks far too complicated. I don't know how you guys do it.
dear sir, how to remain all bolt & nuts install..thanks
Love from Andhra Pradesh
Детали отдельно не пескоструятся?
А зачем? Вообще удивлен, что они двигатель снимали, а не песочили прям так)
Excellent human vice you have there! 😉
Great Video! Thank you for sharing.
Hello! I wanted to know where did you buy the head gaskets and valve seals?
Они установили все старые детали :)
@@DarkSoul-m6l ай бле.... хотел купить новые запчасти но наверное не буду
Wow good job👌👍
those gunk... ugggh. was it caused by water mixed in?
my next step in my gsf is it!...motor paitining and detailing
Supiri aiye
Muy buen trabajo saludos desde argentina 🇦🇷
Good job and good luck
the inside of that engine looks fabulous
good video
For black engine, please use black seal! :)
@Kanchana Hashan so the color would blend together?
IDOL!!!!!☺👍👍
Is this a Sri Lankan UA-cam channel
Bro did you use dry ice to clean engine
Hello, were did you find all the gaskets and oil seals needed to rebuild? i have only found pistons and rings
Pause the video at 25-42, he's made a clutch cover gasket out of something, and none of his gasket surfaces are cleaned properly.
I don't think I've ever left a negative comment on this type of video before, I'm all for being creative, but nobody should ever take this as an example of the right way to rebuild an engine, only work to these standards if you are desperate and have no options, and don't expect the finished job to last too long.
Those are gasket sheet which can be cut to a desired shape. Works as good as a cut piece
@@NagaManu90 Thank you!
@@BR1883FC That's the problem for this bike, you can't find gaskets or original pieces nowhere, you have to be creative, i agree it should be cleaned properly
@@NagaManu90 If it works as well as a new gasket why is there white gasket sealer over every surface? This is a poor job and not a good example to put on the internet of how to repair an engine. Only work to these standards if you have no choice at all. And remember to clean your gasket surfaces properly.
Que elegancia trabajando 🏍🏍🏍🌏👍
Really great job
Where can i buy a flywheel for mine?
Can anyone help to me?
Nice work!
É muito bom o trabalho de restauração que vocês fazem, vocês também fazem restauração em carros?
#cafécorajoso
ストローク33mmの魔法のエンジンですね
Hey mate, i want to restore a honda md90 can you let me know how to contact you?
නියමයි😍
I want to buy this engine brother?
I wish I know some one that could rebuild my bike engine great to see skill at work