Great Video Harvey, I am considering purchasing a new 372xp x-torque and it was interesting to watch you use parts from a original 372xp in this build ! 😊
Tht 372 looks like brand new. And seems to b a SCREAMA, I love them 372 !!! Specialy when thy r a zinger like tht one is..💨💨💨 I'm sure glad to c u back n the shop my friend !! I'm just like u Harvey I get excited just hearing tht thing zing up like it did and its not even mine..🤣😎🤙
Have had several 372 non x torque last 15 plus years hard logging. Use 32 to 1 mix ratio. Cut everything from pulpwood to large hardwood timber. Keep your saws clean,sharp,and dont go cheap on mix oil or gas. Just about any saw will last a super long time.
i am real pleased you gave those carb settings, thanks nice to cu, my 372xp was new to me, bought it after running a 2165 jonsered for years, nice video harvey! ;0)
Good info Harvey. Did you see Afleetcommand(hill top saw shop) had a video yesterday about taking the dividers out of the X torque intake and air intake for more power and better longevity he says. I love the fact that you and other experienced guys are willing to share info, it's good to see.
Western New York the southern tier region? I grew up in Chautauqua county a stone's throw from peek'n peak ski resort and I don't live far from it currently. Everyone else I watch on UA-cam is out west or in Canada I had no idea you were closer. Watching your videos and tin Man's videos has got me back into working on saws and porting and of course buckin's Little talks on his videos might have helped push me a bit I'm not going to lie there. Anyway man I really appreciate all you do on here keep up the good work.
THANK YOU for this video. Made a mistake and bought a Holzfforma 372xp Pro. SOOOO MANY things wrong with the assembly. And lots of little parts needing replaced because of their half a$$ery. You're helping A LOT in getting this junk running, LOL! SHOULD HAVE just bought a legit Husqvarna.
And I really appreciate everything you do for the UA-cam community and the people you're an upstanding citizen and a hell of a man glad to see you keep going
What a coincidence! My name is Dan and, I have a brand new 372XP still in the box I would love to have you build for me. I'm a full time logger in Northeastern,Vt. Awsome video!!!!👍😎
Good afternoon Harvey I bought A372XPW yesterday Cannot wait to get up when I visit you to pick up my saw I will bring that as well well amongst other things lol oh thank you for putting up such great stuff it's stuff and teaching us dumb dumb how to do things lol the new things lol have a great weekend
So glad to see you doing what you love. I can see you light right up when your working on saws. I’m glad your feeling ok and I hope barb is feeling well also. My 565 got stolen a couple months ago but I found another one with low hours cheap. Someday I’ll spend the money and have it ported. I have been told by many builders that the auto tunes actually handle the porting very well. As always work safe 😎😎🇺🇸🇺🇸
Hi Harvey!!😀😀 Boy she is snappy!! I like it!! Was just thinking about you hopefully doing some 044 and ms460s. Was glad to hear that you are going to be doing some next. I still would like to have one of my ms460s done some time. Take care my friend!!😀😀❤❤ Logger Al
Great conversion!! I need a couple of those airhorns. I ordered a couple but they were for the xtorq and theyre different than the xp. Cant wait to see all these saws cutting!!
I sure hope you do a ms661 mag. I have the new one m tronic 3.0 but I would like to have an adjustable carb on it. I ported it and built a custom muffler for it. I have a video of it cutting on my channel. Thanks Der Guy.
It has taken me two years to finally understand what the wrench that took my Husky and then brought it back with a loner to keep if I would slip him two hundred. My dead saw has air leaks. I do lean in when I hear you go threw the hole deal. I will be putting that crapper on the bench and give it a good look see. But my birthday is the 25 and I will be 61 and so first things first.
@@timfreeman476 Today like most days this year it is raining in NH. So while it rains on my parade I will have the time to go back on you guys' channel about air leaks.
Hello Harvey I love your videos and how you like to break things down and explain them for everyone to understand that takes a certain specialist someone it means you are compassionate about this topic chainsaws I am the same I really love chainsaws and love to use them for my job I have a 371 XP the crank seized it is no longer running I would like to rebuild it I have this idea in my head to put a 54 mm top end on it is there a possibility that you know how to achieve this I have done some research and seen ways that people have done it I would really like to get a 55 mm top end that is the ultimate goal to try to make a 371 that is damn near 88 cc's or close to it I do not want to Port it I would like to leave it stock and just build a custom exhaust system for it like I do all of the other chainsaws that I own if you have any help in this direction I would greatly appreciate it keep up the good work I really do enjoy your videos they are most entertaining and extremely knowledgeable thank you very much for your time.
You also have to change the air filter holder and air filter. I have put an XT air filter on my 372XP but you must change the top cover too. The XT air filter requires the tall, hump top cover. I put it one my 372XP but took it off because I did not like the tall cover. My 372 is an XP with the streamlined top cover and the smaller air filter
Great UA-cam show I was hoping you might have a homelite Super Xl 12 electronic coil I bought 2 on eBay both were bad I would buy it from you if you have one ? I have a pioneer partner 655 and a partner 70 and Homelite EZ and 2 power Mac 700 and 1 Power Mac 800 also the best little saw in the world McCulloch power. Mac 6 and a homelite 150 but I do need the electronic ignition coil for a 1980 super XL
We can't catch a break this summer from the rain.barely make a pay check between gulley washers..I'm a die hard so I 'll be working overtime when the weather allows..
@@eriknelson6529 I'm doing good friend. Yes we ve had about the same..log prices are good but mother nature seems to wanna fight us...lol..be safe...say hi to Dawn for me...great meeting you guys..hope we can do it again in the future..
If you happen to be doin a stihl 29 to 39...be careful with ur handlebar bolts and fuel tanks too....brand new stihl tank bad av buffer..screw went right on in the darn tank...total brand new everything except crank and top cover and carb..
should be called antique saw show.. .. strato saws been around for over a decade. time to step up to the times and build those that 6100 had u all twisted
I like a man who keeps a clean saw. I take great pride in how often I clean my saws
Great Video Harvey, I am considering purchasing a new 372xp x-torque and it was interesting to watch you use parts from a original 372xp in this build ! 😊
372 xp's are the ticket, best saw ever.
Front muff bracket bottom screws 👍👍 great vid Harv
New York you say. I'm up in Northern New York. Love the channel.
Tht 372 looks like brand new. And seems to b a SCREAMA, I love them 372 !!! Specialy when thy r a zinger like tht one is..💨💨💨 I'm sure glad to c u back n the shop my friend !! I'm just like u Harvey I get excited just hearing tht thing zing up like it did and its not even mine..🤣😎🤙
Im glad to see you put that hat screw in!!! Good job Harvey
Hello Harvey. I'm gonna put a 372 top end on my Jonsered 2165. Those tips will come in handy. Thanks for sharing your knowledge
Have had several 372 non x torque last 15 plus years hard logging. Use 32 to 1 mix ratio. Cut everything from pulpwood to large hardwood timber. Keep your saws clean,sharp,and dont go cheap on mix oil or gas. Just about any saw will last a super long time.
so would that be high octane fuel , here we have three choices 91, 95 and 98 octane
@@closertothetruth9209 yes. non ethanol also.
i am real pleased you gave those carb settings, thanks nice to cu, my 372xp was new to me, bought it after running a 2165 jonsered for years, nice video harvey! ;0)
Early Saturday morning having a lay in with a brew watching my favourite show, great start to the weekend. Cheers from NZ
heat wave, drought's and forest fires galore out west here in BRITISH COLUMBIA AND NORTH WESTERN U.S.... thanks 4 video. be kind.
Glad I found this channel
Thank you for all the videos 💪.
What can one do to get one of these ironhorse saws?372xp
Harvey, love watching these videos. 👍👍
Harvey you are the saw whisperer of ported chain saws. Great vid as usual. Be safe and be careful.
Good info Harvey. Did you see Afleetcommand(hill top saw shop) had a video yesterday about taking the dividers out of the X torque intake and air intake for more power and better longevity he says. I love the fact that you and other experienced guys are willing to share info, it's good to see.
This is like Christmas. Two videos in one day.. happy days...well done Harv..
Western New York the southern tier region? I grew up in Chautauqua county a stone's throw from peek'n peak ski resort and I don't live far from it currently. Everyone else I watch on UA-cam is out west or in Canada I had no idea you were closer. Watching your videos and tin Man's videos has got me back into working on saws and porting and of course buckin's Little talks on his videos might have helped push me a bit I'm not going to lie there. Anyway man I really appreciate all you do on here keep up the good work.
THANK YOU for this video. Made a mistake and bought a Holzfforma 372xp Pro. SOOOO MANY things wrong with the assembly. And lots of little parts needing replaced because of their half a$$ery. You're helping A LOT in getting this junk running, LOL! SHOULD HAVE just bought a legit Husqvarna.
Yes, your videos always help👍🏻 thanks Harvey!
And I really appreciate everything you do for the UA-cam community and the people you're an upstanding citizen and a hell of a man glad to see you keep going
This was great if I hadn't watched this I probably would have put the long screws through the bottom of my crankcase tomorrow
Good to see you back in the shop Harvey👍 love the showroom treatment on that nice 372
Thanks for showing us how it’s done on the mighty 372.
Great video Harvey, i enjoyed every minute of it. That saw sounded great when it fired up!
What a coincidence! My name is Dan and, I have a brand new 372XP still in the box I would love to have you build for me. I'm a full time logger in Northeastern,Vt. Awsome video!!!!👍😎
what a beauty saw,and fired right up.sounding realy good.its fun to work with clean saws.
Lookin good Harv! Have a good weekend!
Good afternoon Harvey I bought A372XPW yesterday Cannot wait to get up when I visit you to pick up my saw I will bring that as well well amongst other things lol oh thank you for putting up such great stuff it's stuff and teaching us dumb dumb how to do things lol the new things lol have a great weekend
Thanks for the videos Harv, awesome to see ya around again!
Nice to see a man take pride in his work. 👍
Your a kind man ,Thanks Mate KOALA Bob
Nice to see you Harvey best wishes for you and your family.
So glad to see you doing what you love. I can see you light right up when your working on saws. I’m glad your feeling ok and I hope barb is feeling well also. My 565 got stolen a couple months ago but I found another one with low hours cheap. Someday I’ll spend the money and have it ported. I have been told by many builders that the auto tunes actually handle the porting very well. As always work safe 😎😎🇺🇸🇺🇸
Hi Harvey!!😀😀
Boy she is snappy!! I like it!!
Was just thinking about you hopefully doing some 044 and ms460s. Was glad to hear that you are going to be doing some next. I still would like to have one of my ms460s done some time.
Take care my friend!!😀😀❤❤
Logger Al
I second this. I have a 044 that I want to do some work on and having some port numbers to go on would be great.
Great conversion!! I need a couple of those airhorns. I ordered a couple but they were for the xtorq and theyre different than the xp. Cant wait to see all these saws cutting!!
Man you weren't kidding when you said you were putting the video out today
I LOOK FORWARD TO EVERY VIDEO YOU MAKE ,,I GLAD TO SEE EVERYONE IS DOING WELL HOPE YOUR GARDEN IS DOING GOOD
Very nice saw. Well done
Harvey you are one busy beaver
I sure hope you do a ms661 mag. I have the new one m tronic 3.0 but I would like to have an adjustable carb on it. I ported it and built a custom muffler for it. I have a video of it cutting on my channel. Thanks Der Guy.
Great video, sending the best from WNC.
Oooh I excited! Hellow mr harvey, and dont take this the wrong way but you look good uncle harve not that you look bad you just look...good 👍
let me tell you fella s that have been waitin fer yer saws ,, it ll be worth it ,
I want to see you working on that ms 460 you mentioned. Some of what you say about the 460 may help me make mine easier to start.
Glad you got that chain brake bolt in hahaha 😉
I also have a 1981 Husqvarna 2100xp that may need a bottom end has an air leak. Idles high and can't turn it down but still has a ton of power.
Great video
It has taken me two years to finally understand what the wrench that took my Husky and then brought it back with a loner to keep if I would slip him two hundred. My dead saw has air leaks. I do lean in when I hear you go threw the hole deal. I will be putting that crapper on the bench and give it a good look see. But my birthday is the 25 and I will be 61 and so first things first.
Marc Duclos happy birthday
I will be 61 in oct have a great day
@@timfreeman476 Today like most days this year it is raining in NH. So while it rains on my parade I will have the time to go back on you guys' channel about air leaks.
I got three 038 one of each version, watching makes me want a 372,even tho my 038 mag is a little on the wild side.
Thanks Harvey, makes me want to hit the wood pile.
Sure love those 372s Thanks for the video
lookin' good there Harvey
How about any ms200t builds ?
Love the videos , keep up the good work my man 👍😎
Hello Harvey I love your videos and how you like to break things down and explain them for everyone to understand that takes a certain specialist someone it means you are compassionate about this topic chainsaws I am the same I really love chainsaws and love to use them for my job I have a 371 XP the crank seized it is no longer running I would like to rebuild it I have this idea in my head to put a 54 mm top end on it is there a possibility that you know how to achieve this I have done some research and seen ways that people have done it I would really like to get a 55 mm top end that is the ultimate goal to try to make a 371 that is damn near 88 cc's or close to it I do not want to Port it I would like to leave it stock and just build a custom exhaust system for it like I do all of the other chainsaws that I own if you have any help in this direction I would greatly appreciate it keep up the good work I really do enjoy your videos they are most entertaining and extremely knowledgeable thank you very much for your time.
Go on harvey..lovely saw dan
Hello Nicky 👍
You red headed madman!!
He sets them all around his chair when he watches uncle Harvey! 😂
Nice 👍 nothing like working on a like new still saw 🔧🔧
Hey Harvey sounds Awesome 👌
Just bought my first NEW NEW saw. 372xp. Maybe some tips on getting more power out of her as a X torq still ?
Open yer muffler up just a bit! Should help!
@@theironhorse6600 I will give it a shot ! I saw that the overseas saws have a muffler with a front port. Should I get one of those?
I can recommend the hyway dual port!
How’s the green house coming harv? Thanks for the video
Rain heat rain heat rain Heat sounds like Mother Nature is trying to temper some metal
Greag video as always uncle harve
Harv keep up the good work.
I actually messed that bolts up recently and put a big hole in a perfect case
I got a 1988 Husqvarna 272xp what you charge to port and polish it and do a mufler mod?
She barked right off, idled and came up to RPM in a flash! A guy can't ask for much more than that!
Is she nasty! I bet she is
that saw s gonna pull
@@BuckinBillyRaySmith you KNOW it will!
IronHorse do you have a part number for that aluminum Holzfforma throttle holder?
Thanks
You also have to change the air filter holder and air filter. I have put an XT air filter on my 372XP but you must change the top cover too. The XT air filter requires the tall, hump top cover. I put it one my 372XP but took it off because I did not like the tall cover. My 372 is an XP with the streamlined top cover and the smaller air filter
Sounds snappy
Nice work
I'm in WNY near Springville. How would I get ahold of you to do some work to my 372?
Would a 365 top cover/filter fit on 372? (372 is so clumsy!)
Any recommendations for a after market 372 crank and bearings?
Great UA-cam show I was hoping you might have a homelite Super Xl 12 electronic coil I bought 2 on eBay both were bad I would buy it from you if you have one ? I have a pioneer partner 655 and a partner 70 and Homelite EZ and 2 power Mac 700 and 1 Power Mac 800 also the best little saw in the world McCulloch power. Mac 6 and a homelite 150 but I do need the electronic ignition coil for a 1980 super XL
what are your thoughts on a husky 480
Hey Ironhorse, is it worth changing the 372XP intake and carb to non-xtorq if you don't port it too? Will performance improvement be noticeable?
Впуск не подойдет на x-torq цилиндр,там отверстие больше
Don't forget the screw on the chain break on the right side
Could I do the same thing with a 365?
We can't catch a break this summer from the rain.barely make a pay check between gulley washers..I'm a die hard so I 'll be working overtime when the weather allows..
How are you Tim? Hopefully well. It's certainly been a challenge logging this month for sure 13 inches of rain here just this month!! Be good bud
@@eriknelson6529 I'm doing good friend. Yes we ve had about the same..log prices are good but mother nature seems to wanna fight us...lol..be safe...say hi to Dawn for me...great meeting you guys..hope we can do it again in the future..
@@timbarden4578 you bet Tim. Was certainly a pleasure 🙂
Husqvarna 🔝Chainsaw
Sounds good iron horse
96 here in Nebraska
it is what it is its a good saw hi to Adam Fox ////that and slammers saw will have good feeds and speeds
Bill hope your good bud.
@@eriknelson6529 ok
@Slammer i think i know him lol
Sweet 😊👍👍👍
You just have a brain bucket on for that dead spruce, Ironhorse!
👍🏻
I have the instant bam on mine but then when started it hunts until i pull the throttle, real strange
If you happen to be doin a stihl 29 to 39...be careful with ur handlebar bolts and fuel tanks too....brand new stihl tank bad av buffer..screw went right on in the darn tank...total brand new everything except crank and top cover and carb..
👍s🆙
Hey I gotta new 2021 372 I would love to have the torque upgrade done to mine... how do I contact for work...🤘😆
Hey Harvey it's Jerry I've got quite a few spare 372 Parts if you happen to need anything get ahold of me
People strip out the screw holes using power tools !
should be called antique saw show.. .. strato saws been around for over a decade. time to step up to the times and build those that 6100 had u all twisted