At 3:50 Tysm bro. Looked around the room for 45 minutes thinking we lost something. Only person I’ve seen, to specify that they don’t come pre-threaded.
Great tutorial, great angles, great lighting, great detail, small details, and motivational support. Why does this guy not have thousands of subscribers? I sure am subscribing.
Hi, not sure if you can help but I have connected all my fans properly and my icue doesnt read my fans for rgb configuration. I do have an older end motherboard so not sure if its just my pld motherboard not lettimg icue read the fans from the board
these are always such a PITA. i have corsair icue 465x case that came with (i think( lightning core ARGB controller and 3 LL120 fans already - but then I also got this SP120 box of 3 fans with another controller (shown in your video) - building for a friend.
i did everything you did and when i turned my pc on the 1fan of the 4 was running slow and the rgb was not working any reason why? and anything i can do to make the rgb work? and how do i make the fans go faster? it would be very much appreciated if you could let me know.
Hey, I have the same fans, I use the iCUE 220T RGB case, And I got the same fans you showed in the video installed, the 3 front case are working fine and I can control the RGB but I cannot control my rare fan's RGB. Do you have a solution for that?, Thanks, and great video!
can i use n electric screwdriver. i was stupid enough to try install the fans inside the case instantly without threading the holes first and now it is impossible for me to screw them in with a screwdriver.
you could possibly use a electric screwdriver just be careful not to strip the head. I suggest take the fans back out to thread it. if not just push the fan against the case while screwing in the screws.
If your talking about for the PSU than yes you would need to get a SATA power splitter but depending on what you get the PSU usually comes with that. Also, all fans that have RGB you'll need a SATA cable in order to power it. unless you have a motherboard has rgb headers.
Was thinking of getting this exact fan bundle, but I only need 2 fans, 1 would be spare I guess... The fan wire (that goes to the fan header) is that connected to the RGB hub? The fans themselves only connect to the RGB hub and then are 100% controlled (RGB and fan speed) through the hub and therefore controller through icue software?
Guess you have a back up fan just in case one goes bad. So there's 2 connectors. 1 goes to the header on you motherboard and the other goes to the rgb hub. Unless you have a hub (commander pro) that can take both connectors. You can control rgb using the icue software
@@Senpai_TG So the fans have 2 connectors, 1 for the rgb hub, 1 for the motherboard fan header? Then the rgb hub connects to an rgb header on the motherboard?
If your trying to thread it while it's in the case it'll be a little hard. Its better to do it on a flat surface that way you can press down on the screw.
@@Senpai_TG what about for changing the colors and such and synching it to games i hp[e i dont now need to spend 50 more bucks to get a addition commander node
At 3:50 Tysm bro. Looked around the room for 45 minutes thinking we lost something. Only person I’ve seen, to specify that they don’t come pre-threaded.
Me who forced the screws in there… they still work thank god.
That’s a good thing to know. Thanks for pointing it out
Great tutorial, great angles, great lighting, great detail, small details, and motivational support. Why does this guy not have thousands of subscribers? I sure am subscribing.
Thanks, I try my best!
I’m your 200th subscriber
Hi, not sure if you can help but I have connected all my fans properly and my icue doesnt read my fans for rgb configuration. I do have an older end motherboard so not sure if its just my pld motherboard not lettimg icue read the fans from the board
You’re literally amazing this helped me out so much
Glad I could help
Thanks for this tutorial video im building a new pc with these coscair fans n same pc case just wanted to know how it worked. Thanks again
Great video man! very detailed!
Does it have the same RGB as the RGB Pro? It looks like it.
these are always such a PITA. i have corsair icue 465x case that came with (i think( lightning core ARGB controller and 3 LL120 fans already - but then I also got this SP120 box of 3 fans with another controller (shown in your video) - building for a friend.
Hallo! How to Setup or settings ?! I have random light music on 9 fans😢😮😮
Hey. I want to install 6 fans, but my MOBO only has 5 headers. Will the software still work if I use a System Fan hub?
i did everything you did and when i turned my pc on the 1fan of the 4 was running slow and the rgb was not working any reason why? and anything i can do to make the rgb work? and how do i make the fans go faster? it would be very much appreciated if you could let me know.
You need to put the rub in order
Thanks for the vídeo!! Where can I find this 3PIN to USB 9PIN cable?
Huh? You mean the HUB?
Simple and informative....well done bro❤️❤️❤️ keep rising
Appreciate it!
Sick build, thanks for the great video! Subscribing now
Thanks for the video, helped alot.
Hi, my motherboard no more slots for fans cable. What should i do? Thank you!!
Fan splitter or get the corsair icue commander pro
I have a problem I just have a fan that lights up in rgb and it's only part 1 of the node core but
Hey, I have the same fans, I use the iCUE 220T RGB case, And I got the same fans you showed in the video installed, the 3 front case are working fine and I can control the RGB but I cannot control my rare fan's RGB. Do you have a solution for that?, Thanks, and great video!
Try unplugging and plugging back the rgb connector on to the hub. Make sure your connections are fully seated.
If you have a Commander Core, do you still need to use the RGB hub?
If you have the iCUE Commander Core XT no you don't need to use the rgb hub cause the commander core has rgb ports.
can i use n electric screwdriver. i was stupid enough to try install the fans inside the case instantly without threading the holes first and now it is impossible for me to screw them in with a screwdriver.
you could possibly use a electric screwdriver just be careful not to strip the head. I suggest take the fans back out to thread it. if not just push the fan against the case while screwing in the screws.
I'm assuming if I don't have a sata cable, I'm going to need to buy one just for these fans?
If your talking about for the PSU than yes you would need to get a SATA power splitter but depending on what you get the PSU usually comes with that. Also, all fans that have RGB you'll need a SATA cable in order to power it. unless you have a motherboard has rgb headers.
@@Senpai_TG thank you king 🙏 I'm new to PCs and these fans are my first modification. Your video definitely helped!
@@honeybadger-kk9ml appreciate the kind words! Still new the PC world myself. Just thought to share my experiences. Hope your PC build goes well.
Was thinking of getting this exact fan bundle, but I only need 2 fans, 1 would be spare I guess... The fan wire (that goes to the fan header) is that connected to the RGB hub? The fans themselves only connect to the RGB hub and then are 100% controlled (RGB and fan speed) through the hub and therefore controller through icue software?
Guess you have a back up fan just in case one goes bad. So there's 2 connectors. 1 goes to the header on you motherboard and the other goes to the rgb hub. Unless you have a hub (commander pro) that can take both connectors. You can control rgb using the icue software
@@Senpai_TG So the fans have 2 connectors, 1 for the rgb hub, 1 for the motherboard fan header? Then the rgb hub connects to an rgb header on the motherboard?
@@Iesous27yes to the first question. The rgb hub has a SATA connector which connects to PSU.
@@Iesous27 I’m losing braincells reading your responses his video was easily comprehend-able I’m not sure what you couldn’t understand😂
does it come with the hub or do i have to buy it separately
If you get the 3 pack, it comes with a hub. If you get the fan individually, it doesn't come with it.
@@Senpai_TG i bought a singular fan and want the rgb to work what do i do?
Thank you sir, I personnaly going to buy teses so thanks
Idk why but it feels impossible to thread the fan holes for me
If your trying to thread it while it's in the case it'll be a little hard. Its better to do it on a flat surface that way you can press down on the screw.
Turn the screw in reverse until you feel a nock or jump and then start screwing it in, should mean the thread starts properly
I only have 2 fan port on my motherboard so how do I do ?
iCUE Commander Core XT Smart RGB Lighting and Fan Speed Controller
do i need the hub for the lights to come on
Yes, you'll need the hub in order to power and control the rgb.
@@Senpai_TG what about for changing the colors and such and synching it to games i hp[e i dont now need to spend 50 more bucks to get a addition commander node
Assisti do Brasil obrigado 😊
Thank you for watching!
What if my mobo has only 1sys_fan
W
What rgb hub??? Pls😢
The rgb hub is included
i cant find a usb thing on my mobo
Its possible you could have something plugged into it already, if not then I hate to be the bare of bad news but your motherboard does not have it
Do you have to connect every fan to a fan socket or do you just connect one?
every single one, if you don't have enough on mb, you need to buy fan splitters (pwm), but don't do more than 2 per motherboard connector