Привет. Отличная работа. Чертежи можно купить у тебя? Тоже хочу что то подобное построить. Центральный дифф заваривал? Редуктор передний не изнашивается оттого что в противоположную сторону крутится постоянно? И для чего вал отбора мощности? Какая максималка?
I have watched all the episodes and this is simply incredible, how much work, and a meticulous one, dedication, knowledge and passion, i'm sure also the work behind the scenes (video edit) is putted into this magnificient build. amazing.
The only thing I’d have done differently assuming I had your budget and skills is to have had the engine totally rebuilt before installation. You’ve put so much time money, and effort into this build! Great job!
You know it's not just the many hours of skilled trial and error in the build but also the vision to see BMW axles and a small engine and turn them into an impressive and practical car. Well done!
Thank you for sharing your project, I looked foward to your posts every week. (Sunday Evenings). I am inspired to now at the age of 56 to see what i can be achieved in a humble shed. Cheers from Australia.
Donn I'm glad I didn't find you from the beginning only b/c waiting for the next video to come out would be torture. This way I can watch each series in its entirety as time allows. Btw, you deserve every compliment found in these comments. The 4x4 trailer [where I started], and this build have been outstanding. *God bless.*
I've watched this epic build from the beginning and enjoyed every single video 👍. Almost hate to see it finished, hope you have more builds for us in the future. Thanks for all your hard work 👍👍.
Donny I have watched this build from start to finish and all I can say is totally outstanding. Every inch is a professional build , my hat is off to you sir! I am a ASE master technician and have watched you take on things that I have seen seasond tech struggle with and never blink an eye. Once again great job!!!
Looks great Donn, don’t forget the “loose nut” behind the steering wheel !!🤣. Thanks for sharing with us, enjoyed watching everyone of the videos on this project. Now I will brew a new pot of coffee ☕️ and get ready for the next ride. Totally awesome what you can do and not burn the barn down. Stay safe and keep having fun. Fred. 🙏🏻🙏🏻👍🏻👍🏻👏🏻👏🏻✋🏻✋🏻👊🏻👊🏻
You sir are a master fabricator. If there is an apocalypse, you will be a survivor because of your ability to make things by using old car parts. A great skill to have. Look forward to your new videos.
You did an amazing job on this one, a massive undertaking and it turned out to be a capable off-road vehicle… Only one thing is missing, the CUPHOLDER! 😁
Just wow. That's all I can say. I pray I had half your shop and skill. I know deep down I could build something like that. I just dont have the tools shop or financial backing right now. I just love finding channels like yours that just fill my mind with new info and ideas! Thank you for sharing us a peak into your creative mind!
Офигенно зажигательная штука получилась! Производители всяких там мелких вездеходов да квадриков нервно курят в сторонке! С меня 100500 лайков. Ах да, можно ж только один лайк.
Awesome work doesn’t even cover what you are capable of. However, watching you work is one of my favorite things to watch as your vlogs are the best I’ve seen. Great job keep it up.
It's not just the awesome machine that you invented, but the piece of art that you just created! And about the video I just have to say that I enjoyed it from the beginning to the end. Thank you for sharing your knowledge, creativity and beautiful work.
Well it cannot be denied. Your fitting is exemplary . There are very few in this pursuit who make as clean a job of the fit out and construction. That thing is built like a tank. Specially in comparison to UTVs & quads.
Nice build, it seems to work well. As an addition, If you plan on driving it in the forest, I would put skid pans on the bottom. Getting stuck with a stump in between the frame is not very fun. Unless the whole thing is light enough to pick up by hand and move off of the stump of course.
My name is Mac Gyver. after seeing this i go home and practice.................so much different skills !!!!....;great video.....greetings from Belguim.
Hi Donn, Congratulations, what a beautiful project it has been, and the end result is nothing short of spectacular. Donn, your God given talent(s) are blowing me away. Be proud my friend, you're one in a million. Thanks for the video, and take care.
Deserves a like just for the transmission linkage - On top of everything else. I've enjoyed watching the individual vids, but seeing it all together is amazing. Great job!
Great job Donn. Thanks for taking the time to make these great videos of the whole build. It’s been highly enjoyable and inspiring watching you create this useful machine. I look forward to watching it in use during future projects. 👏🍺
Absolutely fantastic skills, you Sir, are a pro! This is an exellent example of how much you can do yourself with the right spirit, knowhow and of course these fantastic tools. I have no doubt this had been done only with grinder, arcweld and wrenches, but it would have taken 5 years longer... :)
Excellent job , looks really good . Engineering and mechanical skills in abundance . Now , whats the next build . Keep going excellent channel . From UK . .
i really like the wood storage racks using the liquid crates, and tanks cut diagonally for a roof/cover. that's a very good idea, and i may borrow it to store my own firewood. i can get those crates rather cheaply, and have been trying to think of a useful way to use them. this is the best one yet. thanx!
I've watched this one from the beginning, and I want to thank you for all the hours of planning and busted knuckles.. for my entertainment and education. Thanks again, and can't wait for more.
tubli töö noorhärra..jätka samas vaimus ...ei jõua ära oodata milline sinu järgmine projekt on ...loodan et karoova sind väga kinni ei hoia ...edu jaksu ja jõudu nii sulle kui su perele ...
I can see you´ve made great improvements to your building techniques and methods. Awesome, buddy! putting together everything in place, tag welding and welding later surely works for you. Your work is something else.
So glad to see the final results and be a part of this journey (as viewer at least) 😁. One word: you are a genius. Good job man 👏. Can't wait to see what is up next !!
An absolutely amazing build. The CNC plasma cutter allowed you to push this beast to the next level. Now on to the next build. Perhaps a snow plow for it or a trailer with a drive axle or maybe a new bandsaw mill to replace the one you sold.
Donn you put the steering wheel on the wrong side!! 🤣 Just kidding! You did an amazing job as always! You are my favorite fabricator on UA-cam. Much love from Florida USA! 🍻
No denying that's an incredible job. If I'd ever make one of these My skill level would limit me to just cutting down a 2doorRav4 and putting a cage on it.
More fabrication videos on ua-cam.com/users/DonnDIYvideos
At first I didn't notice, but there is no rear or side mirrors. Despite that, nice job!
How come the floor underguards you made in the chassis welding video weren't fitted in this video ? Thought they were a good idea 👍🏻
incredible ! what's next? a space shuttle?
Rock bouncer next. 🤣
Привет. Отличная работа. Чертежи можно купить у тебя? Тоже хочу что то подобное построить. Центральный дифф заваривал? Редуктор передний не изнашивается оттого что в противоположную сторону крутится постоянно? И для чего вал отбора мощности? Какая максималка?
I have watched all the episodes and this is simply incredible, how much work, and a meticulous one, dedication, knowledge and passion, i'm sure also the work behind the scenes (video edit) is putted into this magnificient build. amazing.
Well said
Согласен))👏👏👏
The only thing I’d have done differently assuming I had your budget and skills is to have had the engine totally rebuilt before installation. You’ve put so much time money, and effort into this build! Great job!
Нафига его перебирать? Работает отлично. Шепчет!
that french diesel engine is rock solid👌
To není diesel ale benzín 😉
Great job Buddy! :)
I watch your work too, cheer...
Ooo kogo ja tu widzę😅
To teraz czekam na twoja wersję bolidu
@@Adam1991. a polish guy))
You know it's not just the many hours of skilled trial and error in the build but also the vision to see BMW axles and a small engine and turn them into an impressive and practical car. Well done!
Thank you for sharing your project, I looked foward to your posts every week. (Sunday Evenings).
I am inspired to now at the age of 56 to see what i can be achieved in a humble shed.
Cheers from Australia.
Donn I'm glad I didn't find you from the beginning only b/c waiting for the next video to come out would be torture. This way I can watch each series in its entirety as time allows. Btw, you deserve every compliment found in these comments. The 4x4 trailer [where I started], and this build have been outstanding. *God bless.*
I've watched this epic build from the beginning and enjoyed every single video 👍. Almost hate to see it finished, hope you have more builds for us in the future. Thanks for all your hard work 👍👍.
Donny I have watched this build from start to finish and all I can say is totally outstanding. Every inch is a professional build , my hat is off to you sir! I am a ASE master technician and have watched you take on things that I have seen seasond tech struggle with and never blink an eye. Once again great job!!!
Fabulous build! Followed every minute! Looking forward to te next one!
I can’t wait to see the powered trailer he is gonna pull behind it.
Came out splendid my dude. Here's to you using it for years to come.
Looks great Donn, don’t forget the “loose nut” behind the steering wheel !!🤣. Thanks for sharing with us, enjoyed watching everyone of the videos on this project. Now I will brew a new pot of coffee ☕️ and get ready for the next ride. Totally awesome what you can do and not burn the barn down. Stay safe and keep having fun. Fred. 🙏🏻🙏🏻👍🏻👍🏻👏🏻👏🏻✋🏻✋🏻👊🏻👊🏻
This workshop is incredible and the knowledge displayed is amazing to watch. You sir are a genius!
Ein hervorragendes Arbetstier mit sehr grossem Spassfaktor. Tolle Arbeit👍👍👍😊
What other channels call Builds are just "put back together"s. THIS is a Build! A bespoke vehicle.
Buddy, this thing kept me watching your channel for months... This thing is the BEST diy vehicle i've seen.
We need more!
There are two things that gonna remain after the apocalypse when all humans are gone. Andrew Camarata's Castle and this UTV.
@@Sceme1991 amen
You sir are a master fabricator. If there is an apocalypse, you will be a survivor because of your ability to make things by using old car parts. A great skill to have. Look forward to your new videos.
You did an amazing job on this one, a massive undertaking and it turned out to be a capable off-road vehicle…
Only one thing is missing, the CUPHOLDER! 😁
I’m so impressed. I’m disappointed I watched a lot of tv shows to see how this can be done. Your video here made it simple . Ty
Najbardziej niezwykły projekt jaki widziałem. Gratulacje!!! Naprawdę przydatne maszyna w lesie!!!
Napewno solidniejsze niż te markowe
Dał drugie życie temu silnikowi i częściom których użył
Just wow. That's all I can say. I pray I had half your shop and skill. I know deep down I could build something like that. I just dont have the tools shop or financial backing right now. I just love finding channels like yours that just fill my mind with new info and ideas! Thank you for sharing us a peak into your creative mind!
Der Kandidat hat 110 von 100 Punkte,
Auch wenn das Lenkrad immer noch auf der falschen Seite ist
TOP
Это невероятно! Отличная работа!
Офигенно зажигательная штука получилась! Производители всяких там мелких вездеходов да квадриков нервно курят в сторонке! С меня 100500 лайков. Ах да, можно ж только один лайк.
Mate, there is no doubt in my mind. You are an artist. That's a great piece of workmanship.
Félicitation pour la fin de ce dernier projet !
Belle vidéo pour résumer la construction !
Merci pour ces belles vidéos de home made !
Awesome work doesn’t even cover what you are capable of. However, watching you work is one of my favorite things to watch as your vlogs are the best I’ve seen. Great job keep it up.
Отличная работа 💪💪💪👍👍👍
Obviously a farmer's son! I like seeing how your engineering skills grow from project to project. Keep it up!
Loved every minute of this build. You sir are one of the best out there. You have a skill set that most people would dream of including myself
It's not just the awesome machine that you invented, but the piece of art that you just created!
And about the video I just have to say that I enjoyed it from the beginning to the end.
Thank you for sharing your knowledge, creativity and beautiful work.
So awesome Projekt, Followed this Projekt from the First Screw to the Last 😊👌
Well it cannot be denied. Your fitting is exemplary . There are very few in this pursuit who make as clean a job of the fit out and construction. That thing is built like a tank. Specially in comparison to UTVs & quads.
Awesome! Just awesome! Super fun to watch the whole build along the way and now to see it finished. Super cool!
man, you did a great job with this old car components and i really don't understand, why, some people dislike work like this. greate job
Nice build, it seems to work well. As an addition, If you plan on driving it in the forest, I would put skid pans on the bottom. Getting stuck with a stump in between the frame is not very fun. Unless the whole thing is light enough to pick up by hand and move off of the stump of course.
This. The brake-lines could use a shield as well, so a branch does not brake them.
My name is Mac Gyver. after seeing this i go home and practice.................so much different skills !!!!....;great video.....greetings from Belguim.
Hi Donn,
Congratulations, what a beautiful project it has been, and the end result is nothing short of spectacular.
Donn, your God given talent(s) are blowing me away.
Be proud my friend, you're one in a million.
Thanks for the video, and take care.
Deserves a like just for the transmission linkage - On top of everything else. I've enjoyed watching the individual vids, but seeing it all together is amazing. Great job!
Great job Donn. Thanks for taking the time to make these great videos of the whole build. It’s been highly enjoyable and inspiring watching you create this useful machine. I look forward to watching it in use during future projects. 👏🍺
Donn DIY arkadaşım tebrik ederim. Hurda araba parçalarından güzel bir UTV araç yaptın. Emeğinize sağlık. Kolaylıklar diliyorum.
Absolutely fantastic skills, you Sir, are a pro! This is an exellent example of how much you can do yourself with the right spirit, knowhow and of course these fantastic tools. I have no doubt this had been done only with grinder, arcweld and wrenches, but it would have taken 5 years longer... :)
10:30 Beautiful welds. Amazing build. Skills level 100 !
Väga ilus ja viisakas lõpptulemus. Edu uute projektidega!
Awesome job and great videos 💪👍👍😊
Жаль в школе такому не учат нынешнюю молодёжь...
Блиин,ну это круто ты сделал мужик,красавчик...
Я все видео смотрел,как ты его строял...
There is no explain, but you love this Work. Respect!
OTTIMO lavoro 👍👍👍
Drinking my morning coffee a d watching your build was a great way to start my morning.
Thank you for making this video dude 👏🏽👏🏽
Excellent job , looks really good . Engineering and mechanical skills in abundance . Now , whats the next build . Keep going excellent channel . From UK . .
DIY feels like in a car factory 👍👍👍👍👍👍👍👍
Хорошая машинка получилась точка просто супер
i really like the wood storage racks using the liquid crates, and tanks cut diagonally for a roof/cover. that's a very good idea, and i may borrow it to store my own firewood. i can get those crates rather cheaply, and have been trying to think of a useful way to use them. this is the best one yet. thanx!
Просто шикарный автомобиль👍
as a Peugeot owner, i'm pleased that we can make awsome thing with him.
Absolutely👍
This is an achievement you should be proud of! I look forward to seeing your trailer and the places you go with it. Any idea what your buggy weighs?
I'm actually quite impressed. Better built than any stock rzr for sure
Fukn mint bud 👌
wow dude!! is amazing
Increíble.. hasta me gusta más que las orugas anfibias... como siempre lo mejor
Çok güzel tasarım . İşçilik mükemmel.
Genius. Von dir lern ich immer wieder dazu. Danke.
Классная машинка получилась!!!
Congratulations, Donn! Another great project finished. And your 4x4 performs fantastically.
NICE!
The sickest home made project I’ve seen and it’s amazing
🏆🏆🏆👍🇺🇲🙏
Thank you for sharing
Brilliant. What a great build. Excited for what's to come
Job Well Done Donn. From start to finish how long did this take you to build? Thanks for sharing, I enjoy your videos.
my life would be much more interesting if i had your skills and equipment.. well done.. thanks for the share
Palju õnne!
Поздравляю! С окончанием проекта!!! 👍👍👍👍👍👍👍👍👍
Awesome dude! Next build a spaceship and give Elon a run for his money.
I've watched this one from the beginning, and I want to thank you for all the hours of planning and busted knuckles.. for my entertainment and education. Thanks again, and can't wait for more.
tubli töö noorhärra..jätka samas vaimus ...ei jõua ära oodata milline sinu järgmine projekt on ...loodan et karoova sind väga kinni ei hoia ...edu jaksu ja jõudu nii sulle kui su perele ...
I can see you´ve made great improvements to your building techniques and methods. Awesome, buddy! putting together everything in place, tag welding and welding later surely works for you.
Your work is something else.
👌👏👍✌️🥳
That turned out sharp. Better than anything store bought
Step 1: Own a BMW or Buy a BMW
👀🤔😍Oh my God a real master builder at work👍👍
So glad to see the final results and be a part of this journey (as viewer at least) 😁.
One word: you are a genius.
Good job man 👏. Can't wait to see what is up next !!
Well done. This has been a great build right from the start.
I sincerely liked this series. I’m sure the best has yet to come!
An absolutely amazing build. The CNC plasma cutter allowed you to push this beast to the next level.
Now on to the next build.
Perhaps a snow plow for it or a trailer with a drive axle or maybe a new bandsaw mill to replace the one you sold.
I think the trailer with a drive axle is a good idea since he left some of the jack shaft hanging out the back it wouldn't be too terribly hard
@@carsonshipley3287 That's the entire purpose of the PTO shaft.
I'm ready for the next part.. the pushing trailer!!!!
I love it man!! So much work big respect🙌🏻🙌🏻🙌🏻
That turned out so nice, Donn!!
belle transformation d'une Peugeot 🤩! un excellent travail !👏👏🙏🙏🤘🤘
Donn you put the steering wheel on the wrong side!! 🤣 Just kidding! You did an amazing job as always! You are my favorite fabricator on UA-cam. Much love from Florida USA! 🍻
So cool that it's all repurposed and fabricated instead of some rich kids toy! Very impressive job!!
This is awesome! And you will never believe, but I need one like that for my forest works.
You my man are a true craftsman. Hats off to you !!
Thank you!
This was a unique project, you are factory by yourself, well done!!!!!!
You SIR are one very clever bugga congratulations on mastering a skillful build
No denying that's an incredible job. If I'd ever make one of these My skill level would limit me to just cutting down a 2doorRav4 and putting a cage on it.
Thumbs up just by seeing the intro alone man with the action plan
This is such a well documented project. Te results speak for themselves. Well done sir!
Bravo! That was outstanding. You deserve an award for that.
Really i need these one! I love it. Amazing work my friend! With love from Greece
Outstanding! Love watching people that 10x my skills and knowledge building stuff 😀