Це відео не доступне.
Перепрошуємо.
3.6l Chrysler 300: How To Replace The Thermostat
Вставка
- Опубліковано 18 сер 2024
- Brian Eslick from How to Automotive www.howtoautomo... takes you step-by-step through the process of replacing the thermostat on a 2011-2018 Chrysler 300 with the 3.6L engine.
Affiliate link mentioned in the video for MAHLE Original TI 235 95 Engine Coolant Thermostat Housing amzn.to/2H4Pn9H
Affiliate link mentioned in the video for Mopar 10 Year/150,000 Mile Coolant 50/50 Premixed amzn.to/2IYLdRc
Affiliate link mentioned in the video for Milwaukee (MLW255721) M12 FUEL 3/8" Ratchet Auto Kit amzn.to/2J0O4Js
Affiliate link mentioned in the video for Milwaukee (MLW255322) M12 FUEL 1/4" Hex Impact Driver Kit amzn.to/2vg6Quj
Affiliate link mentioned in the video for the How to Automotive Tool Store www.amazon.com...
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomo...
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to-autom. .
Google+: plus.google.co....
LinkedIn: / brian-esl. .
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive
Thank u, dealership wanted to charge me $400-$500. Bought the part at auto zone for $20. Thank u so much
Wtf that’s real expensive for such a 25 min job
Way simpler and easier than I first imagined. Great video - you saved me a lot of $ doing it myself.
Glad the video was helpful and helped you save. Thank you for watching!
@@HowtoAutomotive what if you fill up the reservoir then loosen the blender skew and nothing come out?
A little bit of air come out and the reservoir does go down a bit but nothing comes out and coolant stops coming down from the reservoir.
Just finished doing this in my 300 and I can say that it was a flawless replacement very great video to follow !!!
How much coolant did you go through all said and done? My engine light just came on and the scanner said it’s the thermostat just wondering how much coolant I need to get before I try it
Just got quoted $230 for this... You saved the day. Thank you!!!
Glad to help you save. Thank you for watching!
Same here.. they charging me 225 but I just found out how easy it is to change it yourself.
I got quoted 280.. i just paid 20 bucks did it on my own took 20 mins hell yeah
Great video! No life history or speeches, just right to the task at hand. This video says it all about you.
Good, straightforward video without excessive talking, thank you!
Best video out thier on changing a thermostat
Jennifer Drake thank you. Have you changed your thermostat yet and did it go smooth?
Facts I think I’m going to do mines myself. This video is walking you through every step literally
I would have never thought that i could do this without this video thank you so much, you saved me money
Always happy to hear that I helped someone save money. Thank you for watching!
Great step by step walkthrough and audio. Definitely helped a lot.
I agree with Jennifer Drake, this is a very easy set of instruction to follow. JOB WELL DONE.
This is a great video. Followed it a couple years ago on my 2013 Chrysler 300s and it’s been great. Thank you!
Glad you like the video. Thank you for watching!
Just bought the whole housing today. Great video. To the point, and very informative.
Did you have to drain the antifreeze before replacing the thermostat?
@@sarawright6781 no ma’am.
Thanks! This took no time and less money
people like you rock so easy to follow this video and you’ve saved me hundreds I appreciate you!!
Happy to help. Thank you for watching!
I just used this video to change out my thermostat. Thanks for making this video.
I appreciate the video. Never done this one before and now I’m confident in doing the job. 👊🏼
This was a very valuable video to me. Very easy project to do. I am thankful to you for making this video.
One of the best videos I’ve watch doesn’t waste time just gets straight to the points thanks man your a great help!
Glad you like the video. Thank you for watching!
Thanks for the video . I’m not mechanically incline , but you made it easy and to the point 🙏
Thank you so much for this video it only took me about 20-30 minutes to do myself!
Appreciate the video. Saved me a trip to the shop.
I'm working on a 2014 Grand Caravan. The orientations of components are different, but similar enough. Thank you for the great video!
Best Automotive How-To Video Ever!!!
Thank you sir. You saved me 300 bucks, I did everything for 40 bucks
I was a scared to try this but your video gave me the confidence to do it!! Thanks 😎
Fast and straight to the point, awesome video!
Best video I've seen mechanically thanks!
Great video, followed your tutorial and had no problems. Thank You!
Thanks for the video! Straight and to the point!
Awesome video great editing to the piont and very clear instructions thank you
Thank you! Did everything go smooth for you?
Amazing. I'm about to try this tomorrow.
Good luck with the thermostat. Thank you for watching!
You get a things up just for not having some silly 1 minute intro. Just got started. My man!
Great video, man. Very descriptive video, and great clarity on what to remove and not to remove. Thanks
Glad you like the video. Thank you for watching!
Replaced a thermostat, filled reservoir but nothing comes out of the bleeder valve. I assume you don’t want to start the engine or do you? OK, I spent 10 or 15 minutes looking around at more videos to see if I could find an answer. When I came back I decided to open the valve again and Wala it was bleeding. Must’ve taken a while for gravity to work the coolant through the system. The tank was dry when I started this project which may have had something to do with it. Great video. Took maybe 20 to 30 minutes to get the actual replacement done.
Thank you for your time making this video.
Thank you, up and running again.
Thanks so much for this video!!!!! You saved me about 300 bucks!!!!
Great video 👍🏿
Wess Grant thank you!
Thanks. This video was simple and easy to follow!
Thank you and thank you for watching!
Awesome video. Thank you very much. Liked and subscribed!
Thank you for subscribing and watching!
finally, a video that has my exact car year.
Great video. Short detail but to the point.
Man.... after watching this it took 15 minutes 👍🏼💯
Glad the video help. Thank you for watching!
Great step by step walk through!
The Auto Tech thank you!
Great video ! Now I think I can replace it myself
Hey brian this is working hands automotive great vid
Working Hands Automotive thank you!
I like your video. Going to attempt to change mine out tomorrow. These places want $400
Great video about to try and change thermostat. Thanks
Thanks Brian great video..
Great video thank you man great instructions and did mine exactly how you said it thank you so much I just subscribed
Awesome and informative!
Justin Bobier thank you and thank you for watching!
Just changed mines 2015 Chrysler 300 . Good video!!! Thanks man . Definitely gonna subscribe to your page
Glad the video was helpful. Thank you for watching and subscribing!
Thank you Brian
Excellent video... Well explained... Thank you... 👍
Great toturial and thank you
How do you remove the engine light one once you have already put the new thermostat
It should go away by itself… my CEL went away by itself after a few drives! I gotta change out my thermo again… the computer recognizes that the problem is fixed.. most of the time
Thanks so much
Hey quick question is there 2 gaskets that goes on, when I took the old thermostat housing off it was a O ring on the Block where the thermostat housing bolts in at and the gasket that actually goes onto the thermostat or is it just that 1 gasket that goes onto the thermostat bc I basically did everything you did in the video and my car started back overheating. Also I didn’t bleed it either maybe that’s why it ran hot possibly
It's the old gasket, just remove it.
Those matco plyers though 💯💯💯
Thank you so much that helped me a lot
Imma finna try to do this
Awesome thanks!!
Does anyone know how long it takes for the check engine light to go off, after thermostat replacement?
Good video thank you very much
Thanks, great video but been 20 min and top hose hasn't gotten hot. Any suggestions?
Once you swap the thermostat, does the check engine light come off instantly or does it take awhile
Did it ever go off?
@@tallgood227 yes it did, I was told to unplug the battery for a few minutes and it took the signal off
Do yo u have a vid of where the temp sensor is located or maybe a diagram
Great video. I have a 2013 5.8L is it pretty much the same?
Have any suggestions on change in the heater core so I don’t have to remove out the whole dash
Thank you for your video
Best video I've seen thx
Will the check engine light come off
By any chance do you know what's the normal running temperature on a 2014 Chrysler 300 3.6l .. or at least what does your run at when it's fully warmed up
Wow..! Very Helpful thank you.
Thank you for watching!
How do I know if the thermostats going bad smart car is not overheating but it does go up when idling .
Can you point out where the 2 thermostat temperature sensors ore on the 2014 Chrysler 300s please?
I was stumped the minute pink coolant came pouring out of my thermostat housing. Parts department at Chrysler had no clue what I was talking about, lol, I’m stuck now since I can’t mix and don’t know what to do.
What about changing the freeze plugs
Was your check engine light on before you changed the thermostat?
Hey to change a thermostat on 2011 Chevy Malibu how do you bleed it after changing the thermostat
Thanks a lot for the video you saved me $
Jesus Lucas glad to help you save. Thank you for watching!
I have a quick question is it necessary to take the hose off if you can just take the whole housing off with the hose still on if you are only changing out the thermostat? Great video btw
Whats the normal temperature to look for in the temperature level after its changed ?
Thank you saved myself alot of $$ by watching this video .. now only thing how do I clear the check engine light once I replaced the thermostat?
I can take it to an auto parts store like AutoZone and as them to clear it or buy a code reader off Amazon and clean it.
Could a bad thermostat cause a coolant leak? Yes right?
What if the cooling fan doesn't cycle on? Is that a bad thing? I just followed your video on changing the Thermostat and you made it so easy to do, Thanks!
Sometimes it takes forever to get that fan to run. I would turn on the AC just to make sure it works. But the AC on the fan should engage. After that test drive let it cool down and double check your coolant.
@@HowtoAutomotive I did turn on the AC and it works fine, so I'll let it cool down and check the coolant level! Thank you!
Saved a singlemother 🎉 5:53
Does anyone’s thermometer gauge move around a lot ? Like especially the last third ?
I did everything except I forgot to bleed it...its still running ok should I still bleed it?
Great video!
Thank you!
Great video 👍
Help! What if the fan never turns on?
You don't need to put silicone around the housing?
Hi
I just found out my car has the same problem
Does it have to be switch right away or can it wait a few days?
Did you drain anything before starting ?
Is their any special pressure release
Thanks a lot!!!
Hey Brian. Thanks for the info. I have a 2013 Town and Country. Is it pretty much the same thing?
Should be pretty much the same. The 3.6L VVT is a common engine for Dodge, Chrysler, Jeep, and Ram. Yours is the same engine, but there might be just a few little differences here and there.
So what if you try to bleed it but nothing happens? 😞 what if do wrong
What brand is this thermostat housing unit? Could you please post a link to it?
After putting a new Mopar thermostat on , will the check engine light go off by itself ?
Eventually yes but it takes a really long time. Better off just getting a code reader for 20 bucks or going to AutoZone and having them reset it for you.