Це відео не доступне.
Перепрошуємо.
Fixed Blade Broadhead Accuracy Test
Вставка
- Опубліковано 17 сер 2020
- We shoot the new G5 M3, Tooth of the Arrow, G5 Montec, and the QAD Exodus through the Elite Kure.
We wanted to know which fixed blade broadhead was flying just right, so we filmed it and figured we would share what we found out. Obviously all broadheads are going to fly different out of each bow, and there is human error in these test. But if you are interested in some of these broadheads this will be a video you are going to want to watch.
If you have enjoyed this video make sure and leave us a thumbs up, Don’t forget to subscribe!
Follow us on Instagram
unguided_outdoors
OG montecs are filthy accurate! Thanks for sharing sir.
Been hunting the g5 montec since they came out. My favorite fixed head for obvious reasons. Made in Michigan, USA!
They are a fantastic fixed blade
What gr do you use I’m a jr hunter pretty new to hunting
@@tiny5214 Try different ones- see which ones fly better with your arrow. Higher grain will give you more punch (kinetic energy)
Nice shooting! All of your groups were quite consistent, which proves the main variable being tested here was the different broadheads. With your setup, the G5 Montec broadheads would be in my quiver. I switched from a fixed 3-blade broadhead that I shot for decades to Slick Trick Viper Tricks a few years ago. As far as accuracy & penetration goes, I don't see myself ever switching to anything else. If I were searching for a new broadhead, the G5 Montec would be on my short list. It would be interesting to see the same test done with different shooters/bows/arrows.
Feeling great about my Montecs!.. put down a nice 10pt last Fall. It didn't go 100yds. Had a nice quartering away shot... thanks for putting this video together!🎯👍
They are stupid accurate
What weight are the original montecs ?
I had a real bad experience with those new montec M3 broad heads I wouldn't recommend them at all
Glad I picked some of the montecs up. Chris b just did a video on mechanicals and I'm not convinced
I’ve take a few animals with the original Montecs, furthest one being at 80 yds and complete pass threw and he was dead within 50 yds!! Watched the whole thing unfold, was awesome!! Double lung shot
Our favorite fixed broadheads. Durable, accurate, and dependable!
Qad all day
I love my Montecs. The originals look like they have a cutting edge inside the blade too. They make an awesome sound as the pass through an animal.
Nice test! I love the original Montec, it's a cool-looking broadhead that has always performed pretty well for me. It would be nice to see a warm-up and then control group with field points first before jumping right into testing, make it as scientific as possible. Just a suggestion, have a good one!
Makes me feel better about the original Montecs I just purchased
They fly awesome for sure.
I've got some montecs G5s from 3 years ago that i am still currently using along with a couple of the montec CS. One of the G5s passed through the upper leg bone of a white tail on a bad shot, i sharpened it and it's also still in use. That one was a killshot too.
They are a great broadhead no doubt!
Nice
G5 Montecs are accurate and affordable. Also one piece steel construction can always resharpen. Got my first hog with G5s 🤙🏽
i could live with the older montecs , sold . great video its the whistlers for me
They really are a great broadhead, can’t go wrong with them.
Can’t have a fixed blade accuracy test without slick tricks! Love the vid though!
Thanks buddy!
You've been "tricked" lol
I always get pass throughs with my Montecs. They have served me well
and that's why I've chose the G5 montecs for the last 3 years
Great Vid. That Beat at the end through...FIRE!!!!!!!!!!!!
Thanks dude
Awesome video I'm still rolling the annihilator broadheads this year but keeping a montec on standby
Dude. You're a good shot. I was impressed
I wish you would have gone thru your setup. Draw weight, arrow specs etc. It would be interesting to compare a 100 grain setup versus a 125 grains? Anyway, thanks for shooting.....
That was pretty darned good shooting.
Yeah ole been is a ASA shooter, he’s quite the shot.
I just grabbed a set of these from Walmart last second. Never used them before u normal use shuttle t. But inwasnin a pinch and couldn't make it to the pro shop before. Glad these shoot straight!!!!
The m3's seem to follow arrow rotation. Mine hit very left with heavy helical left. Not so much with 1 degree. But og montec is right up there with field points. I was curious about QAD exodus, thanks for the video.
Just whacked my target buck with an exodus at 25 yards. He walked 10 yards looked around got wobbly and tipped over dead
Expdus full blade shoot 8 " left out of my bow. Took three years to figure it out after missing a stud this year. My bad. I had faith in em. I shouldnt have
I couldn’t get the M3’s to tune and they consistently hit extremely far right (moved my scope as far a possible).
I switched over to a Slick Trick Magnum 100 for my hog hunt!
Props for doing the test at 40 yards!! All the accuracy tests at 20 yards are pretty worthless.
Qad exodus > Montecs
Thank you kindly
The G5 and Exudus are the best. The blood trains are awesome on both.
We have killed a pile of critters with the exodus.
@UnGuided Outdoors Bull Elk?
The old montecs are money another head that flies well is slick tricks
Ricky Phillips I wonder if the new ones are quieter
Big pucker factor for me when you pulled that first broad head with your hand so close. Sliced the shit out of my hand last year doing that lol
I just did that with an iron will a few weeks back lol
I just recently purchased the montec m3 broadheads and when I shot them they were hitting within an inch of my field points without changing anything.
Yeah every bow is different
The Montec flies well for me too - but I can't get them wicked sharp. Thank you for putting this content together for us - it was well done. Good luck this fall.
Get a sharpening stone. A fine flat one, I have an EZE Lap. 3 stokes forward on each side. Then two, then one. Not a lot of pressure. It makes mine razor sharp. My wife Hit an antelope quartering toward her in front of the right hip, passed thru and out the left hip. He bled out in 20 yards.
Try the carbon steel Montecs then, you can shave with them out of the package.
Saul Good I’ve harvested a buck mule deer and a pronghorn with my Montec CS. They are amazing.
Get the carbon steel. They sharpen up like a surgeon's scalpel. Get a couple of wet stones. 1000 and a 5000.
Or, make it simple and buy the G5 Outdoors Sportsman Sharpener- it will split a hair when your done. I actually sharpen all my knives with it as well
All of these broadheads will group together if your bow is tuned correctly
The m3 had the second best grouping though. Have been running the original montec forever. Going to give the m3 a try in the spirit of tinkering
They are great broadheads no doubt.
This side of the pond Montecs are really popular. Every time I go to change........... I don't. 😁
very informative video, thanks sir
Nice shootin' Tex🤠
Magnus Black Hornet
Love the g5 montecs. field point accuracy, good penetration, easy to sharpen. However, they do whistle as they fly through the air.
But really, how long are they in flight, for that to be a factor?? In 20-30 yards, i doubt they are an issue.
Check out Simmons shark broadheads they are great heads!!!!
Ok Ok wheres the fish smashing ha ha good deal thanks for sharing
Man we tore up the airboat 😂, because of covid we can’t get in a certain motor part so we are dead in the water right now. Just going to be hunting stuff for a bit.
@@UnGuidedOutdoors All content is good and man do I know what its like to be broke down have tore my kicker up twice this year in big rocks and it seems parts might be hard to get with this rona crap
Nice vid. Thanks!
"Solid broadhead with steal vanes shouldbe super quiet." 2:34
They’re AAE “stealth” vanes.
Micro tune your bow. It’s slightly out of tune, rest needs bumped left, or yoke tune it correctly. 40 yards should all be in the black dot.
Common misconception for broadhead tuning. Should micro adjust towards broadhead impact with left and right planing.
@@wtw8277that’s the sight adjustment you’re thinking of moving towards the hit not the rest adjustment
If broadhead impacting right of field point consistently you micro adjust the rest to the right. If broadhead hits left of field point move rest to the left. If broadhead hits high compared to field point you move arrow rest down and vis vs for broadhead low of field point. The physics do not change from paper tuning to broadhead tuning. Bareshaft and broadhead flight will function same way. This is commonly misunderstood. MFJJ of podium archer had to do additional video correcting this bc he had it incorrect the first time.
Have you noticed a difference in accuracy between vented and non vented broad heads
I can say I did a similar test with the montecs and got horrible results. They were hitting like a foot left of my field points at 40 yards. Not sure what the difference may be.
Could be the bow, arrow setup really a lot of things
Thanks for your efforts and I’m not trying to be negative but any of these broadheads will fly like field points if you micro tune to each of the broadheads. Human error is also prevalent here (not knocking your skills) and a hooter shooter would prove to be a better tool. I think all of these are great broadheads.
Newb trying to learn. For Zombies what broadhead and grain with a ten point m1 titan pro, they have clothing and probably close range so a lighter fixed? Hey thanks *subbed.
😂😂😂 thanks for the sub
Been a while. Fixed all the way. Exodus 100 grain
Tape up the target holes as switch to new testing. Helps eliminate old holes
What is that backstop made of, where can i get one?
Nice you went 40 yards! 20 yard shots don't mean anything.
I've been looking into trying something other than the g5 strikers, i think i know what one I'm gunna try next
It’s a great head for sure.
Tooth of the Arrow did the same for me. I got rid of them...
What I found really interesting is the penetration of the new montec M3s. Old ones fly better due to less metal to be impacted by wind and air. But new oned trade that for crazy penetration. Question can you tune new ones to fly like old ones? That would be perfect broadhead.
Mine flew like field points out of the box. I put some work into my arrows And I have a hamskea hybrid hunter pro.
Proper broadhead tune and the M3 is flawless!
Let's talk Arrows how do you like them ...I've been looking at a few high bullets needing to build 12 what's your thoughts and what did you change from?
Carbon express sent those to us to try and we are really impressed with the Triad arrows. We are coming from Goldtip and Easton axis. The only complaint about the Triads are they. sure are expensive, we are elk hunting next week with them so we are going to see how they do.
@@UnGuidedOutdoors Great look forward to the update ..thank for the reply be safe and good luck
From the comment about the Triads. I'd like to see them cut into thirds, with each third weighed, and each third flex tested with a weight. Somebody did that with their dual spine arrows & found no difference in weight or flex.
I hear they fly good. I'd just like to see the tri-spine evaluation.
I use the Easton magnums with G5s, on a Barnett WT2. Seems to be a decent set up.
@@UnGuidedOutdoors Carbon express piledrivers for me. Best consistency and no flex.
Tune your bow bud
😂 can you shoot groups that tight with field points at 40?
Yea no problem
Great video! what arrow and setup you running?
Carbon express triads about 520g.
@@UnGuidedOutdoors how are you getting those maxima triads to 520g. What is the exact arrow set up if you don’t mind me asking. Looking to run the same thing.
What inserts are you using?
I guess I know what I'm shooting
No annihilator? Wtf
Well just like he said it could be him which more then likely it is. I dont believe any of these test when human error is involved. Most you can get from this test penetration.
How do you line up each of the different Broadheads blades up with the fletching vanes?
What arrows were you using for this test?
I think these were good too connectic pierce or something like that
I shoot the original. 🥊🔥
Wow that was a good video I was really surprised that you were able to find any of them they would fly like a field tip it must have been the smallest cutting diameter of the fixed-head Broadhead you were using it is called aerodynamics it's just about impossible to get a fix head to fly like a field tip that's why I use mechanical heads and everything that I use so I can have Field Point accuracy with every shot
Man, oh man.. you couldn’t be more wrong. Just UA-cam Ranch Fairy and start learning my son.
Smh.... dude you are mistaken
@@DevilsBrigade94ranch fairy only shoots like 25 yards and acts like he’s hunting rhinos instead of 120 lb deer
I tested the Dirt Nap DRT on my channel. Check it out.
I have always heard great things about them.
They definitely shoot great. Just dull as "F'!
If you have not bare shaft tuned, your broadheads will not group well.
ok how about a test at "real world" distances ( 23-27 yds )
Groups would be a lot closer so there is that lol.
Real world brother come out west you better be able to group at 50 and 60 good video bro
@@joncox2682 i might have to agree with you on that...all my hunting exprience is in the woods of West PA where all my shots on Deer, Bear and Turkey avg 25yds...so i dont know shooting out west...would like to someday though...
You need to shoot 6 or more to get a good idea of accuracy. 3 shots aint gonna do it. Because what if you pull one?
What if you shoot fifty shot groups.... And then that first shot in the woods, you pull?
dude seriously the music while your talking is painful, some of us are getting older and i can not hear what your saying over the musics distraction. I just thought i would through that out there as something to think about when you make video's .... I wish i new what you were saying in this video!
😂😂