Unfortunately mine wasn't great out of the box. Lots of trigger-arcing nearly killing the trigger switch contacts. Gun got so hot on it's first run-out that people were passing comment on the burning smell, and drained a battery in the space of a couple of mags. Turns out the motor on mine was utter rubbish (very amp hungry) and KWA has done away with their flyback SLE diode (that only costs pennies). It really needs a simple mosfet out of the box and a better motor. I've fitted both and now it's a superb CQB shooter. I'll be getting the EVE-9 at some point.
I know your video has been out for a month but I’m hoping you see this: Is the receiver capable of removing the PDW stock to replace with a buffer tube for an M4 stock?
Hi Pheas, great informative video thank you. I’ve been rather stupid and wrecked the thread on the outer barrel of my Eve 4. I have a replacement 7” barrel on the way however I’m at a loss how to remove the current barrel. Is there anyway at all you’d be able to demonstrate how to disassemble the front end down to the outer barrel please? I appreciate it’s a big ask but I would be immensely grateful!
Howdy, unfortunately I no longer have access to this to be able to sorry. If I get the chance to do it I will. but might not be until after you have solved it anyways. Pheas
Hiya, non, just made sure the selector was lined up to "safe" with the lines on the side of the gearbox case and then put the selector in the same position and it was fine, if they de-sync, as it's a tooth based gear, it will cause issues. Pheas
Hey guys, newish to airsoft so stick with me lol. i just fielded this AEG for 30 mins, and it refuses to fire. just stopped. no gearbox noises, isnt even trying to choke a shot out. this was on full batteries as well. any advice would be cool. thanks!
Hello! First thing to try is the fuse in the stock, to see if it has blown. If it has, then replace it BUT expect that there is an issue it has blown, which might mean the fuse blows again as something isnt working in the gun. Try the fuse first (its an auto style blade fuse) and then let me know how it has gone. Pheas
@@PheasAirsoft So i fixed the issue rather quickly! Sorry I didn't get back here sooner! One of the wires connected directly to the motor had a slipped connection! I can only assume this is due to the body of this AEG being mostly polymer. Rather...clacky(?)... when firing. This disassembly guide saved me a major headache. Good looking out for the new guys! Thanks Pheas :)
Hello! Was your safety controls lever switch mushy or not tactile? I was wondering if there was a fix to mine because there were times my gun was in between semi/safety and it was annoying! Thank you!
Hello! Mine was fairly strong at clicking into place. I certainly wouldnt call it mushy ha ha. It can be easy at times to catch it and flick into another firing mode though at times, but then I have found that with just about all M4 types. Pheas
@@ishadedigama hiya. I'm sure Ive seen a post where by if you put it in a locked gun box and check it into the hold (speak to the airline first before doing so) you should be ok. Pheas
Hiya. You need to find a stock tube that has a deep retaining lug (the kind that doesn't offer enough space for a lipo , or at least only for a short one. This is because the vps system comes out a decent way into the tube. You could instead get anyone, then measure up and maybe 3d print a collar to close the gap internally between the retaining washer thing and the cast lug in there. Alternatively... you could fully swap it all to a recoil, but that's hard work and probs not what you wanted (and even more expense) hope that helps. Pheas
I pulled those ugly flathead screws from the pretty sites and replaced with barrelhead hex screws for industrial sexiness. Because they are literally the only flathead screws and are visible among all the other hex-head-screws. So why not aesthetic? Even more interesting is that the Mag-release screw, holding the button and arm together, is a torques screw. T-2, IIRC?
@@PheasAirsoft I lent my second rifle to a buddy who took a nasty fall. The bump stock got twisted during the fall and the wire that runs through there got sliced. I’m looking to repair it.
Hiya, unfortunately it was sold off just after this... However, if you use this disassembly and the titan install for the T6 I have done (the only difference being a little bit if getting the gearbox out of the body) then you will be able to do it really easily. Pheas
Hello, I am usiung a set like this (except its from AlDI in the UK): www.amazon.co.uk/Draper-28001-Screwdriver-Blue-Piece/dp/B0BDMXD3XN/ref=asc_df_B0BDMXD3XN/?tag=googshopuk-21&linkCode=df0&hvadid=626907253412&hvpos=&hvnetw=g&hvrand=15533980681672630236&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9046248&hvtargid=pla-1920783766998&psc=1&mcid=feccc6e2b853385e97185503f436b2ae Pheas
Hiya. Im guessing you meant the ejection port? Likely reason is the plate itself is damaged/ bent out of shape to stop it catching and locking open. Pheas
WOW... that is an over complicated gun. It will be a pain in the butt to perform basic maintenance. Thank you for the video, you helped me decide not to buy this gun. Cheers.
Hiya, it's not that complicated for an aeg. Not quite as simple as standard Airsoft M4, but not difficult either, and they build quality is very very strong. Defo avoid M14 as a platform as they are awful to disassemble. Pheas
![[HOW TO] KWA EVE 4 GATE TITAN INSTALLATION](http://i.ytimg.com/vi/EuhQvx9YXyE/mqdefault.jpg)
![[HOW TO] KWA EVE 4 GATE TITAN INSTALLATION](/img/tr.png)
![[HOW TO] Perun P90 Installation and set up](http://i.ytimg.com/vi/SyVpt3L_ChQ/mqdefault.jpg)
U saved me $350 thank you so much
Unfortunately mine wasn't great out of the box. Lots of trigger-arcing nearly killing the trigger switch contacts. Gun got so hot on it's first run-out that people were passing comment on the burning smell, and drained a battery in the space of a couple of mags. Turns out the motor on mine was utter rubbish (very amp hungry) and KWA has done away with their flyback SLE diode (that only costs pennies). It really needs a simple mosfet out of the box and a better motor. I've fitted both and now it's a superb CQB shooter. I'll be getting the EVE-9 at some point.
good god i want one of these so badly, looks like the perfect speedy boy tool
love the vids !
What size is the grub pin for the muzzel so i can put a tracer on mine. I cabt figure it out it doesnt look like a normal hex
I use a torx 6 to remove it and works perfect. Pheas
Brilliant video and so helpful to everyone I do like the look of the KO 47 scarlet. Loving the channel pheas
I know your video has been out for a month but I’m hoping you see this:
Is the receiver capable of removing the PDW stock to replace with a buffer tube for an M4 stock?
little late but i believe they offer a different model called eve 9 that offers a m4 style buffer tube and stock
Hi Pheas, great informative video thank you. I’ve been rather stupid and wrecked the thread on the outer barrel of my Eve 4. I have a replacement 7” barrel on the way however I’m at a loss how to remove the current barrel. Is there anyway at all you’d be able to demonstrate how to disassemble the front end down to the outer barrel please? I appreciate it’s a big ask but I would be immensely grateful!
Howdy, unfortunately I no longer have access to this to be able to sorry. If I get the chance to do it I will. but might not be until after you have solved it anyways. Pheas
@@PheasAirsoft no problem Pheas, I appreciate the response thank you.
sadly I think I may have done the same thing
please upload a video installing a perun. i’d be soooo happy
Did you have any issues with selector plate / switch alignment when putting back together, it’s been the only issue I’m having at the mo
Hiya, non, just made sure the selector was lined up to "safe" with the lines on the side of the gearbox case and then put the selector in the same position and it was fine, if they de-sync, as it's a tooth based gear, it will cause issues. Pheas
How do I put the charging handle back on!!??
Hey guys, newish to airsoft so stick with me lol. i just fielded this AEG for 30 mins, and it refuses to fire. just stopped. no gearbox noises, isnt even trying to choke a shot out. this was on full batteries as well. any advice would be cool. thanks!
Hello! First thing to try is the fuse in the stock, to see if it has blown. If it has, then replace it BUT expect that there is an issue it has blown, which might mean the fuse blows again as something isnt working in the gun. Try the fuse first (its an auto style blade fuse) and then let me know how it has gone. Pheas
@@PheasAirsoft So i fixed the issue rather quickly! Sorry I didn't get back here sooner!
One of the wires connected directly to the motor had a slipped connection! I can only assume this is due to the body of this AEG being mostly polymer. Rather...clacky(?)... when firing. This disassembly guide saved me a major headache. Good looking out for the new guys! Thanks Pheas :)
For me the orange tip won’t unscrew even after I took out the screw
Hello! Was your safety controls lever switch mushy or not tactile? I was wondering if there was a fix to mine because there were times my gun was in between semi/safety and it was annoying! Thank you!
Hello! Mine was fairly strong at clicking into place. I certainly wouldnt call it mushy ha ha. It can be easy at times to catch it and flick into another firing mode though at times, but then I have found that with just about all M4 types. Pheas
Can u please do the BY-810GS by double bell ?
Do you guys think if I I disassemble this I can take it to another country ?
@@ishadedigama hiya. I'm sure Ive seen a post where by if you put it in a locked gun box and check it into the hold (speak to the airline first before doing so) you should be ok. Pheas
Does anyone know what kind of stock tube would fit the Eve 4? I'm looking to change out the PDW style stock for a different one
Hiya. You need to find a stock tube that has a deep retaining lug (the kind that doesn't offer enough space for a lipo , or at least only for a short one. This is because the vps system comes out a decent way into the tube. You could instead get anyone, then measure up and maybe 3d print a collar to close the gap internally between the retaining washer thing and the cast lug in there. Alternatively... you could fully swap it all to a recoil, but that's hard work and probs not what you wanted (and even more expense) hope that helps. Pheas
Can you remove the forward grip and change it?
Hello! Yes you can! Just a screw inside the grip to loosen the mlok bolts and then it will come off. Pheas
I pulled those ugly flathead screws from the pretty sites and replaced with barrelhead hex screws for industrial sexiness.
Because they are literally the only flathead screws and are visible among all the other hex-head-screws. So why not aesthetic?
Even more interesting is that the Mag-release screw, holding the button and arm together, is a torques screw. T-2, IIRC?
Is it possible to replace the charging cable?
Hiya! The battery wire in the back can be changed, but might lead to needing a full rewire. What are you wanting to do with it? Pheas
@@PheasAirsoft I lent my second rifle to a buddy who took a nasty fall. The bump stock got twisted during the fall and the wire that runs through there got sliced. I’m looking to repair it.
Does it take m4 mags
yes
Can you show how to put in a gate titan in it
Hiya, unfortunately it was sold off just after this... However, if you use this disassembly and the titan install for the T6 I have done (the only difference being a little bit if getting the gearbox out of the body) then you will be able to do it really easily. Pheas
My gun just stop firing. I pull the the trigger and nothing happens. Battery is full charged. Any ideas what else cause this?
Motor issue? Your motor in the pistol grip may need to be readjusted/replaced. I'm not tech though, just a guess.
@@paulkimble6786 the fuse was blown in the gun. Might’ve happened when I was doing full auto like crazy in my backyard haha
same thing happened to me today. fuse is fine. let me know if you've got a fix!
does anyone know if a polarstar ugs system will fit on the kwa ronin 47?
What screwdriver set up using
Hello, I am usiung a set like this (except its from AlDI in the UK): www.amazon.co.uk/Draper-28001-Screwdriver-Blue-Piece/dp/B0BDMXD3XN/ref=asc_df_B0BDMXD3XN/?tag=googshopuk-21&linkCode=df0&hvadid=626907253412&hvpos=&hvnetw=g&hvrand=15533980681672630236&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9046248&hvtargid=pla-1920783766998&psc=1&mcid=feccc6e2b853385e97185503f436b2ae
Pheas
@@PheasAirsoft are Aldi selling them at the minute?
@@the3dpenguy613 I've seen some sporadically in odd Aldis as left over stock. They come back round frequently though. Pheas
@@PheasAirsoft ok thanks, I’ll be on the lookout for
how do you take the orange tip off
Did you figure this out?
@@johnford2536 also wondering if yall figured it out?
@@johnford2536 I got my field to take it off
@@johnford2536 got my field too
How do you charge the gun if someone see this comment idk if I got the charger in box need help please reply 😂
You don’t you have to buy battery and charger
Hiya, as Q Dawson said. You need to buy a battery and charger for this, what country are you in? Pheas
Is the eve 9 the same?
Exactly the same! Pheas
Class video as always
( thariodav )
Mine doesn't lock back
Hiya. Im guessing you meant the ejection port? Likely reason is the plate itself is damaged/ bent out of shape to stop it catching and locking open. Pheas
WOW... that is an over complicated gun. It will be a pain in the butt to perform basic maintenance. Thank you for the video, you helped me decide not to buy this gun. Cheers.
Hiya, it's not that complicated for an aeg. Not quite as simple as standard Airsoft M4, but not difficult either, and they build quality is very very strong. Defo avoid M14 as a platform as they are awful to disassemble. Pheas