Nintendo Switch with sound but blank display....REPAIR SOLUTION!!

Поділитися
Вставка
  • Опубліковано 5 вер 2024
  • This video shows how to repair blank screen on Nintendo Switch. Please watch and enjoy the video guide.
    if i help you with this tutorial, donations will be accepted and it will help on my daily needs.
    Paypal account: cenonhibek@gmail.com

КОМЕНТАРІ • 96

  • @Hanyuu_yu
    @Hanyuu_yu 2 роки тому +17

    When I saw the thumbnail I new I was screwd 💀

    • @cqne
      @cqne 6 місяців тому

      I’m glad I got a mom who knows all about fixing shit like this ima have her help me

    • @sammieunderwood9942
      @sammieunderwood9942 6 місяців тому

      Same

    • @darkx6869
      @darkx6869 5 місяців тому

      @@cqnew mom, i want her to fix mine

  • @TheDrshockermd
    @TheDrshockermd 3 роки тому +11

    You are awesome 👌 my son has dropped his switch multiple times he was always taking it out of the case i got him to dock it and never put it back on. So last time yhe screen went black still had sound and when docked it still came up on the tv but black screen in mobile mode. Opened it up couldn't even see the black light ribben was under the board took some tweezers pulled it out and plugged it in and it works perfectly 👌 thanks so much for the help

  • @JosephAyala
    @JosephAyala Рік тому +1

    Thank you for the video! My son spilled water on the switch and the was corrosion on the back light ribbon. Cleaned it off and Boom! Screen came right on. Thanks again!

  • @jonny1490
    @jonny1490 3 роки тому +9

    My switch was doing the same thing and since I have experience tinkering with electronics I decided to open it up and take a look at what was going on inside. I disconnected both ribbons to the game card holder and cleaned them. Sure enough after reconnecting the battery the switch fired right up. No water damage and had never been dropped. Idk what happened but it fixed it. I bought a small tool kit at best buy for $25 that came with everything. I recommend if you have this issue and none of the hard resets work, just open it up and clean it up. Itll save the hours of aimless research and anxiety. Trust me I was there last night lol. I referenced this video while taking mine apart. Super simple and honestly anyone with some attention to detail will be able to do this.

    • @dayyton6653
      @dayyton6653 3 роки тому +2

      I guess I’ll do that before I spend $100 to send it to Nintendo

  • @palvispanda6410
    @palvispanda6410 4 роки тому +21

    I'm too scared to open my whole switch because I don't want to break it

    • @chickenlittle567
      @chickenlittle567 4 роки тому +5

      Already broken... if you’re a kid and parents don’t care or know what to do then just do it. SLOWLY

    • @Roxxie0Ruin
      @Roxxie0Ruin 4 роки тому +1

      Make sure you keep the different screws separate

    • @sagichdirdochnicht4653
      @sagichdirdochnicht4653 2 роки тому

      If your Device is allready broken, there is literally NOTHING to fear. Either you fix it and have a working device again. Or you break it - which it allready way before.
      In case of a broken switch... Sell Joycons, Dock and everything seperate (will get you more money) and the switch itself as BROKEN. It doesn't really matter if you fucked with it yourself or not. Broken is broken.
      So if you try to fix it - you can't really loose in any event. You allready lost when it broke, either options tough won't make your situation any worse. Except if you are a total fucking moron. Seen a UA-camr last week who killed his battery, because he tried to yank it out with some very sharp metal pliars, LOL. If you got the bare minimum of common sense tough, you propably won't do that.

  • @user-wl3gl2rv4j
    @user-wl3gl2rv4j 4 роки тому +9

    I had a backlight cable problem, too, but I fixed it thanks to you.

  • @Hightech-redneck35
    @Hightech-redneck35 3 роки тому +9

    Thank a lot this helped me so much I had the same problem except my ribbon cable was disconnected

  • @victorbishop2043
    @victorbishop2043 4 роки тому +5

    I had exactly this issue. Gazillions of attempts to reset the system failed. The jumper anchor was loose and needed to be pushed back down again. You saved me from having to buy another one or pay for expensive repairs. Thank you!!

  • @sams5508
    @sams5508 3 роки тому +8

    Please help me everything’s connected still has the same issue any advice how to fix

  • @bookchang5500
    @bookchang5500 7 місяців тому +1

    Thank you SOOOO MUCH! I was wondering if it is the battery issue that cannot supply enough power to light the screen up, and it cost me 30$ for battery replacement, The repairman can't even notice the problem is the ribbon you pulled out @1:50, just clean that ribbon like the way you did with finger rubbing and push it back (remember to lid up the cable cap before ejection and pull-back).
    It saved my day! now I'm gonna make a complaint about the unprofessionalism of the local repairment department.

    • @pinoytekhotspot7563
      @pinoytekhotspot7563  6 місяців тому

      maybe you went to PRACTICIAN not TECHNICIAN...hehe,,,peace out!

  • @paitz
    @paitz 4 роки тому +2

    Thanks !! Had the same problem.. easy fix thanks to your video !!!

  • @LivnDedGrl
    @LivnDedGrl 3 роки тому +3

    Mines doing this and has possible water damage, can't get a straight answer from the kids. It won't work in the dock either. Is that normal? Idk why it's affect the dock part and not be on the tv screen. I can still hear everything and it has touch response but no visual

  • @tikierabennett9839
    @tikierabennett9839 3 роки тому +5

    Can you do a repair video on the switch lite? I have this exact problem but I have the lite version of the switch. thanks It would help so much

    • @lvhk135
      @lvhk135 2 роки тому

      Same

    • @lvhk135
      @lvhk135 2 роки тому

      Btw how is it now ?

    • @tikierabennett9839
      @tikierabennett9839 2 роки тому

      @@lvhk135 still the same way. has sound, just cant see anything. unless you use a flashlight.

    • @lvhk135
      @lvhk135 2 роки тому

      @@tikierabennett9839 ua-cam.com/video/LF0NEqLGKak/v-deo.html

    • @lvhk135
      @lvhk135 2 роки тому +1

      @@tikierabennett9839 go to the yt link

  • @emo-nordegraf
    @emo-nordegraf 4 роки тому +7

    I have the same problem. My switch screen is popping out, so maybe I’ll try to see if anything is disconnected in the morning. Hopefully I don’t screw up though

    • @emo-nordegraf
      @emo-nordegraf 4 роки тому +8

      When this first started happening, it would flicker on and off when I touched the screen. It got to the point where it won’t display anything, so maybe I’m right

    • @emo-nordegraf
      @emo-nordegraf 2 роки тому

      dear god ok so late update i never did open it but i am trying again now 👍

    • @916_Zayy
      @916_Zayy 10 місяців тому

      @@emo-nordegrafdid you fix it?

  • @ahmedtanvir6504
    @ahmedtanvir6504 2 роки тому +2

    Thanks, man. This fixed my problem

  • @josh6813
    @josh6813 2 роки тому +1

    can’t unscrew the bottom screws near the charging port or the side screws where the joycons go

  • @paulocosta6678
    @paulocosta6678 4 роки тому +6

    Hi guys, I'm having the same issue here. I'm from Brazil, and I've already sent my switch to repair in the store I've bought it since we dont have nintendo here in Brazil yet... Guys in the store said that it was a problema in the Motherboard, but I doubt it seeing this vídeo... Do you have any tips of how to desassemble my switch? Videos or some online manual? I'm a doctor and I dont have any experience... But I wanna try it, since the portable feature of switch is the only thing that makes me use it while I'm in hospitals when not working...
    Thank you!

    • @paitz
      @paitz 4 роки тому +1

      Hi Paulo, I just fixed my switch with the same exact problem as this video.. screen makes sound and touchscreen working but no image displayed ..
      You will need special small screwdrivers .. I got a smartphone tool kit that came with te 2 screwdrivers needed.
      Here is a link on how to open the switch.
      ua-cam.com/video/9GJlZfgdDeY/v-deo.html
      Goof luck!!

  • @cellylill2284
    @cellylill2284 3 роки тому +2

    Hey i have the same problem with my switch. Can i just open it and try to do like you do?? Is this safe?

  • @Malainor
    @Malainor Рік тому

    Me replacing a screen on my own...new screen black might be wrong type..resets the 32-40 pins 5 times and input old screen same problem...the black side up on power led...had golden up as it reached better= no power to creen :P thanks man now to reinstall new screen agan works :)

  • @matthauke
    @matthauke 10 місяців тому

    Didn't work for me sadly. I also noticed the backlight connector area looks different on my switch to your one, but it didn't feel loose regardless.
    Hard to say what the problem is now, most likely the screen? I'm imagining that it's just a loose connection as the screen flickered a little before it went black, but I don't know what I'm looking at when I take the back off so hard to know where to begin with the screen!

  • @zingassistancepcconsole8969
    @zingassistancepcconsole8969 3 роки тому +2

    hello! I also have the same problem, I replaced 2 screens but nothing!
    what could be the problem?
    first the motherboard was inserted on a nintendo switch with the case, broken but it worked perfectly, then I replaced the case, and it no longer worked!
    sense of the touch and sound but not seen in the laptop, instead with the dockstation on the TV I see it perfectly !! help !!!!

    • @vickstan9569
      @vickstan9569 3 роки тому +2

      did you resolve this because the exact thing is happening to me and id love to hear what you did.

  • @archersterling8707
    @archersterling8707 2 роки тому +1

    holy... this worked. thanks bro

  • @hannahconkle8877
    @hannahconkle8877 3 роки тому +1

    Is it possible to get a backlight connector online and replace it?

  • @AnythingAtAll69
    @AnythingAtAll69 9 місяців тому

    Well I’m screwed do you know any places that do this kind of repair

  • @user-nh7mx5xo4b
    @user-nh7mx5xo4b 9 місяців тому

    Mine does the same thing but the screen works when i charge it with my phone charger... But i must admit its a really fast type c charger. I will tear down to look inside tomorow as well.

  • @hoboundertheporch
    @hoboundertheporch 3 роки тому

    This video was very helpful :) do you know a good way to clean the ribbon cable for the backlight? I have a unit that was water damaged and has tarnish or corrosion on the rubicon. I can hear sound but there is no display.

  • @yokorose
    @yokorose 4 роки тому

    i may have a peek in the back of mine as i get a little light in the top left and sound but no picture .

  • @mjcdog80
    @mjcdog80 4 роки тому +2

    That just happened too me yesterday. Only had it for a 2 week. No picture no sound i watch all these youtube videos about holding the button BS. I hold it for 12. 15. 20 seconds. Never works. I got my refund. The switch its the worst system ever!! Waste of $200.00 on the lite and its my very first time. Now i see this happens alot after reading everyone comment saying they just got it. Working or not that should never happened period unless you drop it or have it at least a year. Not 1-2 weeks after you buy it!!! I'm staying with my PlayStation vita and psp go

    • @cowofgod
      @cowofgod 4 роки тому +1

      Mate every console has issues like this, most likely caused in shipping, Nintendo obviously wouldn't purposefully make this happen and just because say 50,000 people had this issue doesn't mean the majority of people will have the problem as millions have the system

  • @gerrielguinto315
    @gerrielguinto315 2 роки тому +1

    thank you!

  • @waifuowner911
    @waifuowner911 Рік тому

    Opened my switch and tried it but still blank screen so it’s only playable while docked

  • @Santiagobalosky
    @Santiagobalosky 4 роки тому +1

    Hey, mine has this problem: switch have sound and backlight but no image or tactile response. If I use it docked, it works fine. Tried replacing the screen, but it wont turn on. What could it be? The flex connector?

    • @zingassistancepcconsole8969
      @zingassistancepcconsole8969 3 роки тому

      same as me 'replaced 2 screens but nothing !!!!! what could have been

    • @vickstan9569
      @vickstan9569 3 роки тому

      did you resovle this and how beacuse im in the same situation

    • @Santiagobalosky
      @Santiagobalosky 3 роки тому

      @@vickstan9569 no, i never fixed it. Just works docked

  • @zdottyfrmbk
    @zdottyfrmbk 4 роки тому

    So the onlythingwe need to fix is the blacklight thing and that's it,right

  • @zdottyfrmbk
    @zdottyfrmbk 4 роки тому +1

    What are the tools we need

  • @TheOneWhoKnocks420
    @TheOneWhoKnocks420 2 роки тому

    im having trouble understanding what to do, do i plug the connector back in or do i have to do something with the part you took off the switch in the left can anyone help me?

  • @sliggdaddyyt4358
    @sliggdaddyyt4358 2 роки тому

    AWSOME dude but do you have a switch lite version?

    • @pinoytekhotspot7563
      @pinoytekhotspot7563  2 роки тому

      please help me get subscribers...so i can add more of this tricks...thanks

  • @amandabooth4067
    @amandabooth4067 3 роки тому +1

    Can I send my nitendo switch to you so u can fix it pls

  • @xe5757
    @xe5757 Рік тому

    Just wondering would this work with a switch lite

  • @JgamersonicC
    @JgamersonicC 2 роки тому

    Is there a shop where I can get it repaired

  • @mkr7000
    @mkr7000 4 роки тому

    My uncle just held the power button for a long time and it turned off because the controllers turned off so we just turned it on again and it was perfectly normal but before the problem began i was playing fornite and the screen froze but my controllers were still vibrating and i got this notification saying there was an error and i tried launching fortnite again but the screen froze but on everybodys vid you could still hear sound of you moving the joycon and stuff but mine had no sound so maybe it was just a glitch or something

  • @isaacesplin8568
    @isaacesplin8568 Рік тому

    What a G thank you !!!

  • @unseenentity326
    @unseenentity326 4 роки тому

    My backlight is on but no picture. Kid smacked the screen with a stick and no picture. Can't see any cracks. Can't get it open because of the tri-wing screws.

    • @pinoytekhotspot7563
      @pinoytekhotspot7563  4 роки тому

      Hi...you should get the tri wing screw driver and try to re-seat all the flex cable connector..

    • @unseenentity326
      @unseenentity326 4 роки тому +1

      @@pinoytekhotspot7563 For some reason, an hour later it started working again. But I ordered a screwdriver set for the switch just in case.

    • @pinoytekhotspot7563
      @pinoytekhotspot7563  4 роки тому

      @@unseenentity326 good to hear that...congrats...but after you get the tools just open it and do a little cleaning and reseating the flex cables inside..

  • @ITAmiky01
    @ITAmiky01 2 роки тому

    not work. And after done, now isn't working the volume too.

  • @sword8577
    @sword8577 2 роки тому

    Boss may nintendo switch lite ako kakapalit lang ng lcd! Bat ganun may sound pero walang display ano pwede gawen?

  • @toxic-iv9nk
    @toxic-iv9nk 2 роки тому

    Can you do it on a lite

  • @stickieyams
    @stickieyams 2 роки тому

    My little brother threw my switch down the stairs now it's making noise with no screen 😑

  • @BOROMBOKSTV
    @BOROMBOKSTV 3 роки тому +1

    Ganyan Rin issue nag switch lite ko sir ma tapos na basa

  • @jaykify9578
    @jaykify9578 3 роки тому

    i dont know how it works its too confusing

  • @martelwhite8017
    @martelwhite8017 3 роки тому

    Dang imma need you to fix mines😅

  • @bonnyfan274
    @bonnyfan274 3 роки тому +1

    Now my switch is even more broken

  • @kelly63096
    @kelly63096 4 роки тому

    2:00 Is that the preferred method of cleaning?
    What's the cause for corrosion? I am just having a tough time understanding how my ribbon got corroded in a seal case

  • @amandeepkaler9769
    @amandeepkaler9769 7 місяців тому

    Well my Nintendo has opsite colors 😢😢😢😢

  • @200iqvin7
    @200iqvin7 4 роки тому +1

    I just held power and home and it worked

    • @stormflis7199
      @stormflis7199 4 роки тому +1

      You didn't have the same issue, dumbass.

    • @anake1015
      @anake1015 4 роки тому

      @@stormflis7199 damn

  • @jgaming3786
    @jgaming3786 3 роки тому +2

    This is too complicated 😆

  • @freeartshow8404
    @freeartshow8404 9 місяців тому

    Literally just happened

  • @t1firo318
    @t1firo318 4 роки тому

    Does it work with a switch lite?

  • @ShashTarpy
    @ShashTarpy 2 місяці тому

    I just going to buy a new one, this one is a goner😅

  • @hiroshidrawn
    @hiroshidrawn Рік тому

    vlwwwwwww

  • @NekoAltGf
    @NekoAltGf 7 місяців тому

    You think i can do all dat😢😂

  • @nah8550
    @nah8550 4 роки тому

    Lol.

  • @WesoJR
    @WesoJR Рік тому

    Do you have discord?