Always do a mock up just like this! Great video. First assembly gotta make sure everything is groovy and aligns. If your all set amd she runs hard. Take it all back apart and send everything for quality hard core old school chopper paint work❤❤❤ cant wait to get one of these for me....and my son too I guess can ride it. 😂
Yeah Gopowerspots is the bomb… look I’m looking for a top plate like when you take your gas tank off then bolt it on right.. So with that being said Okay here’s what I got a DuroMax 420cc 16hp engine I’ve got to take the Gas tank off it to make it fit my BT200X Coleman and like I seen John an Ike carsandcamras do with there Colorado build there at the shop I need that top engine plate and two kool looking gas tanks they bolted to I think it was a Coleman mini bike… thank you
Why don’t you guys pull the trigger and mount your chain/clutch guard with dzus fasteners. That way it’s a lot easier to work on the clutch when necessary and the mounting point can stay in place. Just my 2 cents worth. Great looking build by the way.
$900? with no suspension, no motor, no finish, and I have to put it together...why would I buy this and not another MB200-2? sorry guys, but I think you missed the mark on pricing ..as long as a complete running Coleman 200U or BT200x is available for less than $600 at Walmart
@Skott LeFever then GPS needs to do an educational comparison vid showing the differences between the rascal and the chinese made mini bike frames...like wall thickness of the tube, the weld quality, frame geometry, etc.. otherwise the consumer will base their comparison solely on the price only because that the information we have
@@jimcornish242 Jim - that's milinials, Gen X & Y Basing their buy on price alone.... although &900 does seem a little steep for an engineless unpainted kit.At least as said your buying American made.We used to build our own frames as kids their that simple but popular mechanics ram how to articles if you didn't know much and got stuck Your Dad would remember.Cheers Trev New Zealand PS I've got a commercial on that was made in Taiwan & sold in Australia : Rare Deckson Rockhopper with Techumseh engine & Honda QA50 wheels-all Stk from the 70's - putting a Honda CT90 bike engine in it, the dual range 8 speed semi auto $900 & an Engine & paint & you'd own the market.The Chinese are that clever at reverse engineering they are importing blown EL34 Radio tubes to make knock-offs, truely.If it isn't welded down they'll steal it.
@Skott LeFever they say the frame is made in USA but won’t list the specs of metal on their site and you still might have to “make adjustments or re-drill holes” and every other component is the same Chinese parts they use on other cheaper Chinese bikes. That frame does not make it a $900 kit
They are specific for the Rascal Minibike and we do not have them separate. They are different because they are narrower than our 12" and 15" ape hangers
The lite model is 499.99 does it come with literally everything to ride it says it comes with engine and EVERYTHING just seemed cheaper then I expected if so I'll buy it right away lol!
I am getting a bad front end vibration/shake when accelerating on my new build. I have the road 15 x 5-6 Ultimate Mini Bike Street Tires. I also have the upgraded wheels/rim. It looks like bearing are leaking which are brand new. Any Ideas?
GPS, My bike did not come with spacers for the brake calipers. It only came with lock washers. How much of a gap should the spacer take up? I've added washers but it still rubs and does not spin freely
Hey just had a quick question. I ordered a Trailmaster MB200 over a week ago and it’s still processing but the TM storm I purchased 2 days ago already shipped.. I’m having issues getting anyone to contact me back about it.
Looked up your order, it is already in transit to you with R&L Carriers. Should be there tomorrow. The Storm ships from our warehouse because they are smaller. The bigger MB200s are drop shipped from TrailMaster since they are heavier and need to go out on an 18-wheeler. Thanks!
I have a quick question, I have a Realtree 200 mini bike that I bought from Walmart customer returned it Walmart gave sold it to me at 50% off. So I brought it home and looking around I removed the spark to to see it and I noticed when I pulled to start the engine with the plug off, oil was coming out is that Normal or did I get a lemon.
Damn dude there’s a better way than pounding on them down tube center’s like a piece of thread all two nuts two washers you can do it anyway you want but I’d rather press them in get them straight and start pressing them in with thread all… better than all that damn hammering Just try it????
I have the chain guard, sprocket, brakes,, throttle, Wheels, tires and a $100 spun aluminum gas tank....I'm about 12.25% on my way....oh yeah it needs a motor....make that 2.25% 😃.
JB....get an old school panelbeater or general engineer with an English wheel to make you some or try a fellow at a men she'd who can roll you a pair.Goodluck Trev NZ
Wait, what? $900 for a bare frame with no suspension, no frame gussets, no steering stops, and questionable handlebar mounts? I'll sell my bare rupp lil indian frame with full suspension and fold down bars for $1000 I guess.
That’s what I’m saying, even on their site there’s a disclaimer “may need to make minor adjustments and or re-drill holes” How you gonna charge $900 for bare minimum quality, like you said no suspension, no gussets, questionable steering components, one single drop tube off the head tube with no gussets, brass bushings instead of bearings for head tube, bare metal no coating, they also seem awfully shy with not listing the metal specs of their “made in USA” frame, I bet it’s comparable to the cheaper Chinese frames. Not to mention engine and shipping fees. So disappointing, i like GPS a lot but this is just a smack to the face
I wish I would of read the comments before my purchase. I ordered the rascal 5/24/22 and still haven’t been able to ride it. Still waiting on brake assembly, and didn’t realize when you order fenders they don’t offer what you need till you call back and say something is missing. And they realize they didn’t add it to your order before shipping then charge you when you spent well over $1300 on everything you ordered to be charged for someone mishap, no I wouldn’t recommend. Gussets, powder coat and now fabricate fenders, I’m well over 2k into it and still haven’t rode it…….smh go power do better or lose customers like myself. ✌🏼
For that price i legit bought my first motocycle its not a minibike its a f**king Yamaha Ténéré of 1991 works perfectly fine i will Never buy this thing
Big fan of GPS but a price tag of around $900 is crazy! I decided to build my own and got enough steel to make two bikes for around $60 and looks to be heavier steel. Again, BIG fan of GPS but the price tag is very disappointing. Edit: to clarify I never said I could build two complete bikes for $60. I said I could buy enough steel for two bikes for $60. Obviously you need the other parts.
I can tell you live in California or somewhere that does not get snow. That thing will have so much rust if you live in Illinois. You should have at least put a clear coat on it. Lol
Thank you Go Power Sports. I might just buy myself one of these for my birthday lol I've been watching your kit building videos over and over dreaming about how I would set up the perfect mini bike.
I bought a old mini bike , it has a baja brand engine in it thats worn out badly , needs a new engine , my question is do any lawn mower engines work on mini bikes ? like the predator 212cc engines ?
Commenting prerelease🤫 and I'm SO STOKED to build ours! 🦖
Hope you boys have fun with it!
Awesome Build!! Go Power Sports is the Best of the Best!
No they aren't, best you've come across in the USA maybe ?, But the USA isn't the world like it thinks😐🇳🇿Trev New Zealand
Finest how to I've ever seen!! I want the rascal!!
What an awesome build. Now I want one 😁
Heck ya! Send pictures of your build.
I just bought a Tilloston 212 stage 1 for my Coleman Ct200u-a and I bet it’s gonna at least hit 50
Looking foward for this summer,hopefully i can make some monney and this will be the first thing i buy.
GoPowerSports rocks 🤟🏾💥
Always do a mock up just like this! Great video. First assembly gotta make sure everything is groovy and aligns. If your all set amd she runs hard. Take it all back apart and send everything for quality hard core old school chopper paint work❤❤❤ cant wait to get one of these for me....and my son too I guess can ride it. 😂
I bought it and unboxed it. And now I'm watching this video. I'm happy.
The best UA-cam channle in the world
Love this bike man cant wait to see the creations
Couple of questions... Are the build instructions available? All i can find is parts list. How much fuel does the 10" tank hold?
Taylor!!! You might want to upgrade that to the 225RS brother. There's tigers in them streets now boy! What the heck is going on down there??
Sick build!
nice job flawless
Yeah Gopowerspots is the bomb… look I’m looking for a top plate like when you take your gas tank off then bolt it on right.. So with that being said Okay here’s what I got a DuroMax 420cc 16hp engine I’ve got to take the Gas tank off it to make it fit my BT200X Coleman and like I seen John an Ike carsandcamras do with there Colorado build there at the shop I need that top engine plate and two kool looking gas tanks they bolted to I think it was a Coleman mini bike… thank you
Is it okay to install bushings to test fit and leave them in when I send the frame to powder coat? Or do I have to remove them?
You can leave them in. They may need to be taped off before powder coating.
I’ve got one ordered! Looks awesome. Going to build it with my daughter. Will make a nice pit bike 😎
How did it go?
@@chrisharm6242 great kit! No complaints here! I would buy it again
Good to hear! Would you mind recommending a good clutch to use? Thanks
@@chrisharm6242 There was a centrifugal clutch in the kit. I put it onto a tillotson 212 engine that I purchased from them too. It pulls hard!
Thank you, I didn’t notice it came with the kit…all the best!!
Cool looking machine!
Heck Yeah! Just built mine!
If you struggle with the kickstand spring, an old trick is to shove pennies in between the leafs or the spring until you lengthen it enough
Why don’t you guys pull the trigger and mount your chain/clutch guard with dzus fasteners. That way it’s a lot easier to work on the clutch when necessary and the mounting point can stay in place. Just my 2 cents worth.
Great looking build by the way.
Great idea
$900? with no suspension, no motor, no finish, and I have to put it together...why would I buy this and not another MB200-2? sorry guys, but I think you missed the mark on pricing ..as long as a complete running Coleman 200U or BT200x is available for less than $600 at Walmart
@Skott LeFever then GPS needs to do an educational comparison vid showing the differences between the rascal and the chinese made mini bike frames...like wall thickness of the tube, the weld quality, frame geometry, etc.. otherwise the consumer will base their comparison solely on the price only because that the information we have
Great idea!
@@jimcornish242 Jim - that's milinials, Gen X & Y Basing their buy on price alone.... although &900 does seem a little steep for an engineless unpainted kit.At least as said your buying American made.We used to build our own frames as kids their that simple but popular mechanics ram how to articles if you didn't know much and got stuck
Your Dad would remember.Cheers Trev New Zealand PS I've got a commercial on that was made in Taiwan & sold in Australia : Rare Deckson Rockhopper with Techumseh engine & Honda QA50 wheels-all Stk from the 70's - putting a Honda CT90 bike engine in it, the dual range 8 speed semi auto $900 & an Engine & paint & you'd own the market.The Chinese are that clever at reverse engineering they are importing blown EL34 Radio tubes to make knock-offs, truely.If it isn't welded down they'll steal it.
@Skott LeFever they say the frame is made in USA but won’t list the specs of metal on their site and you still might have to “make adjustments or re-drill holes” and every other component is the same Chinese parts they use on other cheaper Chinese bikes.
That frame does not make it a $900 kit
@Skott LeFever still not worth $900 if you compare it to other kits. Other kits offer suspension, gussets, steering with bearings etc.
What size bolts do you use to put that chain guard on?? I bought a GPS one and realized my predator 212 doesn’t have the bolts to hang it.
I’m watching this build again. I was wondering which ape hangers you used. The 12 inch or the 15 inch?
They are specific for the Rascal Minibike and we do not have them separate. They are different because they are narrower than our 12" and 15" ape hangers
@@GoPowerSports Bummer, I think those bars would be perfect for the pit bike front end that I’m converting to fit my F&B minibike.
Super explicado
Pena que aqui no Brasil não tem nada de peças para estas mini bikes.
Dumb question.
Configured as it is in the video, how do you get gas in the tank? Just have to remove the plate I guess?
Can you tell me the size of the front wheel spacers .
Putting mega moto wheels on my rascal lite and need some.
Thanks
Can I order just the frame, forks and fork bushings?
GPS phone cases would be cool to see💯
Do you make this frame longer , front and rear suspension?
Perfect I will copy and make here in Brazil. rs
Where can I get those chain guard bolts for the chain cover, my rascal came with the wrong chain cover bolts. Same engine to.
What size are these cleats? Been looking for a set for my mototec. I hate the stock v treads, try to washout under power around any turn
The lite model is 499.99 does it come with literally everything to ride it says it comes with engine and EVERYTHING just seemed cheaper then I expected if so I'll buy it right away lol!
Yes
I am getting a bad front end vibration/shake when accelerating on my new build. I have the road 15 x 5-6 Ultimate Mini Bike Street Tires. I also have the upgraded wheels/rim. It looks like bearing are leaking which are brand new. Any Ideas?
Can it fit a stage 2 225 Tillotson?
Too Cool!
Are you able to fit a 212 clone and torque converter on this frame? Thank You!
Yes you sure can. Thanks!
Can I fit a 9 HP Subaru OHV engine on this frame? The engine is 16 inches in height.
How much does a complete rascal weigh?
Under a Hundo
Love it💟
GPS, My bike did not come with spacers for the brake calipers. It only came with lock washers. How much of a gap should the spacer take up? I've added washers but it still rubs and does not spin freely
Give us a call so we can pull up your order and see what frame you have. 866-846-5278
@@GoPowerSportscurrently have the same issue
@@am0ney92 I couldn't find mine either, just used a stack of washers for both bolts, 3 of them
How does the chain go on???
I've got a chain video just for you!
Hey just had a quick question. I ordered a Trailmaster MB200 over a week ago and it’s still processing but the TM storm I purchased 2 days ago already shipped.. I’m having issues getting anyone to contact me back about it.
Check reviews before buying
Looked up your order, it is already in transit to you with R&L Carriers. Should be there tomorrow. The Storm ships from our warehouse because they are smaller. The bigger MB200s are drop shipped from TrailMaster since they are heavier and need to go out on an 18-wheeler. Thanks!
Seem somewhat slow to get the product out there, what I've read.
I have a quick question, I have a Realtree 200 mini bike that I bought from Walmart customer returned it Walmart gave sold it to me at 50% off. So I brought it home and looking around I removed the spark to to see it and I noticed when I pulled to start the engine with the plug off, oil was coming out is that Normal or did I get a lemon.
Freedom ....normal just somebody added a bit too much or it was stored upside down at some stage
sTrev New Zealand
I was on the website can’t seem to find the spacer for the disc brake you used for your rim
Give us a call, it's not an item on the website.
Hi. What size the mag and the tires?
Damn dude there’s a better way than pounding on them down tube center’s like a piece of thread all two nuts two washers you can do it anyway you want but I’d rather press them in get them straight and start pressing them in with thread all… better than all that damn hammering
Just try it????
It has worked out on all the bikes we've put together.
I'm betting candy apple red for color. LOL
What the length of the frame
Do you not grease the axle because it has sealed bearings?
Right on
Powder coat?
Very top 🇧🇷🇺🇸
Any coupon codes workin????
How much does it cost
Will a GX390 fit
How much do you sell your mini bike kits for
$900 plus cost of engine and shipping. Too expensive
Love the channel and products but man... expensive kit
Fair enough. Thanks for checking out our builds!
Also is this street legal?
No but for $900 it should be lol
I have the chain guard, sprocket, brakes,, throttle, Wheels, tires and a $100 spun aluminum gas tank....I'm about 12.25% on my way....oh yeah it needs a motor....make that 2.25% 😃.
@Skott LeFever yes sir!!! This would be my ideal ultralight since I'm so non-ultralight😃....😒.
B & S Engines are a Dime a dozen out there , use one of them Cheers Trev New Zealand (south Pacific)
@@trevinskiking2165 I want a Raptor!!!
@@fatbuddycat Was that the old Minibike or brand of clutch ?.. you've lost me ?! Trev NZ
@@trevinskiking2165 en.m.wikipedia.org/wiki/Flathead_engine
Any link on where to get a clutch?
The kit comes with one...
When will you be getting fenders for the rascal in stock
JB....get an old school panelbeater or general engineer with an English wheel to make you some or try a fellow at a men she'd who can roll you a pair.Goodluck
Trev NZ
Wait, what? $900 for a bare frame with no suspension, no frame gussets, no steering stops, and questionable handlebar mounts? I'll sell my bare rupp lil indian frame with full suspension and fold down bars for $1000 I guess.
Next version will be Rascal Max with front and rear suspension
@@robertgelbhar443 i think ill wait for the max frame then
honestly 900 is an insane price
For a rolling frame
That’s what I’m saying, even on their site there’s a disclaimer “may need to make minor adjustments and or re-drill holes”
How you gonna charge $900 for bare minimum quality, like you said no suspension, no gussets, questionable steering components, one single drop tube off the head tube with no gussets, brass bushings instead of bearings for head tube, bare metal no coating, they also seem awfully shy with not listing the metal specs of their “made in USA” frame, I bet it’s comparable to the cheaper Chinese frames. Not to mention engine and shipping fees.
So disappointing, i like GPS a lot but this is just a smack to the face
I wish I would of read the comments before my purchase. I ordered the rascal 5/24/22 and still haven’t been able to ride it. Still waiting on brake assembly, and didn’t realize when you order fenders they don’t offer what you need till you call back and say something is missing. And they realize they didn’t add it to your order before shipping then charge you when you spent well over $1300 on everything you ordered to be charged for someone mishap, no I wouldn’t recommend. Gussets, powder coat and now fabricate fenders, I’m well over 2k into it and still haven’t rode it…….smh go power do better or lose customers like myself. ✌🏼
For that price i legit bought my first motocycle its not a minibike its a f**king Yamaha Ténéré of 1991 works perfectly fine i will Never buy this thing
I think it's very nice looking bike myself once you do what you want to with the pain on it, or powder coat.
When y’all restocking your inventory???
Getting more and more product in every week. Hard keeping up with everyone ordering...not complaining :)
@@GoPowerSports hope we get some stage 2 performance kits coming soon> Every time I have tried to get them, they sell out so quickly.
Focus
Big fan of GPS but a price tag of around $900 is crazy! I decided to build my own and got enough steel to make two bikes for around $60 and looks to be heavier steel.
Again, BIG fan of GPS but the price tag is very disappointing.
Edit: to clarify I never said I could build two complete bikes for $60. I said I could buy enough steel for two bikes for $60. Obviously you need the other parts.
Would love to see how far that $60 got you.
you are paying for the R&D and fit and finish
it need taller and bigger tires.
I can tell you live in California or somewhere that does not get snow. That thing will have so much rust if you live in Illinois. You should have at least put a clear coat on it. Lol
How to get sponsored by you guysss I'd love to build one of those but don't have the money to do so
to much for my budget
Happy birthday to me
Happy Birthday Connor!
Thank you Go Power Sports. I might just buy myself one of these for my birthday lol I've been watching your kit building videos over and over dreaming about how I would set up the perfect mini bike.
Yeah I’m upset, put the copper neck things in and now my bolt won’t fit. What a day
900$ should be for an entire mini bike. I'm not paying 900$ for what is essentially a steel frame with wheels
Well, for $150 more you get a complete kit with a 212cc Tilly.
www.gopowersports.com/LilRascal212
Bro you put NO grease on anything WHEN YOU NEED TO SERVICE YOUR BIKE IT WILL BE A HASSLE. NEXT TIME BUY SOME GREASE BRO
I bought a old mini bike , it has a baja brand engine in it thats worn out badly , needs a new engine , my question is do any lawn mower engines work on mini bikes ? like the predator 212cc engines ?
You may want a horizontal engine for your minibike. Tillotson 212 engines are the best.
I've paid less, much less for complete vintage mini bikes. Stripped and built them my way for no where close to that price lol.