⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
To be honest that bar is a pain in the ass , i replaced the plugs on mine and couldn't get air intake off . So i just held the intake up and changed them. Worked perfect
Good video thanx ....removing the bar is the better way cause i couldn't get the intake out , takes more time but gives you so much room to do other things
Hi please where is the vvt oil control valve on the 3.5 engine of chrysler 300 2010 its pretty much the same engine here. I called 4 chrysler shops even called mopar and they don't know Thanos for your help In advance
Could have you just taken the ONE bolt holding the trans dipstick pipe from the side of the transmission and avoid all that shit you did at the beginning?
I removed my manifold when i replaced the valve gasket, when i put it back my manifold is having a leak, engine sounds funny and breaks barely work, is this symptoms of bad manifold gaskets? Edit: turned out one of my vacuum hoses was clogged with a little gasket maker I accidentally put on.
Yes I’m having the same problem going to get a new manifold because there is a chip where the metal piping connects to the back of the manifold otherwise bad vaccum leak
… after removing the entire lower windshield wipers, bracket, strut bar, upper valance , u gotta take off the fenders, gas cap. Trunk , and take off wheels and put bricks under there and call it a day
@autorepairguys what’s the name of those two cubes on the front with the connectors attached and if your have a hole in one with air seeping is that bad
DA fuck you don't have to remove all the wipes and shit near the windshield... I just replaced all the spark plugs and ignition coils on my magnum... I didn't have to do any of that and I'm a big guy
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I took off the intake manifold without having to remove all that crap 😂
Seriously I show like wtf
Yea I've removed mine twice and never had to remove all the crap they took off.
I was damn sure like wtf y extra😂😂
Because the bar it’s difficult to lift it straight out, tried doing this much easier removing bar and windshield wiper motor and bracketed
To be honest that bar is a pain in the ass , i replaced the plugs on mine and couldn't get air intake off . So i just held the intake up and changed them. Worked perfect
Thank you these people are evil i appreciate all the time and knowledge
He forgot to remove the hood, doors, tires and the rear bumper, 😂😂😂😂😂
Junior Hernandez so true solo para cobrar mas iso todo ese pedo
Idiots!Let me get ur Daddy Trump!
Good video thanx ....removing the bar is the better way cause i couldn't get the intake out , takes more time but gives you so much room to do other things
Whats that bar called?
This saved me 500 bucks 🙏🏼 thanks
Do we replace the coolant temperature sensor from this direction too?
This is a great Video! Lots of good info. Thanks
Right at the 13:10 timestamp. What is that hose called??
I need to replace it, i have a vacuum leak right there.
Me too
Pcv valve tube.
How to replace 3 5l dodge engine airbox
Step 1. Remove entire front end
Nice video ❤. Please, what's the name of this engine you're working on. Like the engine code type
Hi please where is the vvt oil control valve on the 3.5 engine of chrysler 300 2010 its pretty much the same engine here. I called 4 chrysler shops even called mopar and they don't know Thanos for your help In advance
Really good video...... Thank you for taking this time to share your knowledge.
Could have you just taken the ONE bolt holding the trans dipstick pipe from the side of the transmission and avoid all that shit you did at the beginning?
Thank You! After reading your comment that's what I did. One 5/16 bolt removed and the dipstick tube came right out.
Great merch idea
I'm having a problem with my charger the fuel pump won't shut off relay is good fuse is good
Which engine can fit into dodge charger 2006 3.5l v6 sxt
Would this engine fit in a 2010 challenger and also would the whole intake manifold work on the challenger as well from the charger?
Thanks
Good job fellas...... Where can I get that intake for four hundred dollars????????
That front piece of the engine block that's connected to the pully what is that called ????
My 3.5L only has the actuator on the drivers side....any idea why?
I removed my manifold when i replaced the valve gasket, when i put it back my manifold is having a leak, engine sounds funny and breaks barely work, is this symptoms of bad manifold gaskets?
Edit: turned out one of my vacuum hoses was clogged with a little gasket maker I accidentally put on.
Yes I’m having the same problem going to get a new manifold because there is a chip where the metal piping connects to the back of the manifold otherwise bad vaccum leak
@@rylanboutelle6577 did replacing it fix your problem?
U forgot to remove the windshield 😄😁😁
Helo I need repñacement My Intake Manifold you help Me please
do vids for the hemi..
… after removing the entire lower windshield wipers, bracket, strut bar, upper valance , u gotta take off the fenders, gas cap. Trunk , and take off wheels and put bricks under there and call it a day
Mi Charger have Lightning red
Where can I find the o2 sensor ?
Usally on the catalytic converter
So many clips
This is not a Dodge charger.
Why is it that all of your titles are misleading?
molarois morais uses the same platform as the 3.5 v6 charger.
@autorepairguys what’s the name of those two cubes on the front with the connectors attached and if your have a hole in one with air seeping is that bad
it’s called a short runner valve
A little cold. 12° 🥶
2:00 😂😂
Engine Code P1004 💀
Say 9mm bullets in your next video
A real mechanic would just snap there fingers and it would be done
You forgot to remove the flux capacitor
DA fuck you don't have to remove all the wipes and shit near the windshield... I just replaced all the spark plugs and ignition coils on my magnum... I didn't have to do any of that and I'm a big guy
Poor old Chrysler thinks it is a BMW.
Jaja not necessary remove all that’s pieces