How to upgrade Power Wheels / 18 Volts on a 40,000RPM MOTOR!

Поділитися
Вставка
  • Опубліковано 28 сер 2024
  • Upgrading a Power Wheels motor is a must for bringing some excitement into your kids life. I have changed the motors on many of my daughters Power Wheels and today it is time to upgrade yet another Power Wheels motor with a much faster one. I take you step by step in how easy it is to change out one of these motors so you too can see your kids face light up with their new incredibly fast Power Wheel. I listed some parts down below, links to different motors and such that I personally have used in several of our cars that have worked very well for us. Again make sure whichever motor you buy has the steel gear in it as it will be your best bet for longevity. Thanks for checking us out! As an Amazon Associate I earn from qualifying purchases.
    Power Wheels Parts:
    12v 550 Case 30,000RPM - amzn.to/2Xohdqu
    12v 550 Case 35,000RPM - amzn.to/2XiuzVs
    12v 550 Case 40,000RPM - amzn.to/3bN9sQg
    Milwaukie Battery Adapter - amzn.to/2LRzoQ2
    DeWalt Battery Adapter - amzn.to/2LLu6Wq
    Voltage Controller - amzn.to/3cUDFhI
    Milwaukie 18 Volt Battery - amzn.to/31bCCqG
    Milwaukie Battery Charger - amzn.to/37V9kh7
    DeWalt 20 Volt Battery - amzn.to/2YZAAqY
    DeWalt Battery Charger - amzn.to/3etgg7z
    Below are some of the items that i personally use to create these videos. Follow the link below to purchase any of these said items and the channel will receive a small kickback to further support future videos being created on this channel. Thank you for the support!
    MY VLOG SETUP
    Canon 6D Mark ii - amzn.to/36kEhe1
    Canon 24mm Mark ii - amzn.to/3e7iSHH
    Canon 16-35mm Mark iii - amzn.to/2Zpo6KO
    Canon G7x Mark iii - amzn.to/2LRdahi
    Rode VideoMic Pro + - amzn.to/2ysWg5w
    JOBY GorillaPod 5K - amzn.to/3cUEtD5
    SanDisk Extreme Pro - amzn.to/3edwVM9
    MY MOTOVLOG SETUP
    Shoei GT-AIR2 - amzn.to/36n4Y1E
    GoPro HERO8 - amzn.to/36lawcZ
    GoPro Mic Adapter - amzn.to/3gcdTHA
    Purple Panda Mic - amzn.to/2LQyGCU
    Surewo Chin Mount - amzn.to/2A1AINy
    FOLLOW ME ON
    Instagram - www.instagram....
    Facebook - / skyler.l.stutzman
    EMAIL
    Stutzmanskyler@gmail.com

КОМЕНТАРІ • 192

  • @SkylerStutzman
    @SkylerStutzman  4 роки тому +11

    Be sure to check out the links in the description, the motors and parts that I have used in these power wheels are listed for your convenience to locate and order if you are looking to do any of these mods. Thanks!

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +2

      This video has reached 4k people as of now. Very cool how something like this can reach as many people as it has all around the United States; World for that matter. Thank you!

    • @brysys2810
      @brysys2810 4 роки тому

      Thank you so much for listing parts

    • @jenketcham5539
      @jenketcham5539 3 роки тому +1

      Thanks for listing parts! Would you say this is easy for someone who is not electrically savy? 😬

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому +1

      Not too difficult. Just know with any of these mods you have entered the world of just fuckin sending it. Don’t worry about craftsmanship, just try and put a smile on their face; safely.

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому

      I would say go for it. Life is short, make those memories. Who cares if you burn up a motor or two in the process. ❤️

  • @patrickb6597
    @patrickb6597 3 місяці тому +2

    If you have overheating issues with this type of motor you should allow some airflow by drilling holes into the plastic. Also you should get a Motor cooler, it's the same principle as a PC's cooler but specifically for these motors (also comes with a little fan for extra cooling power). I've been using them in my high powered RC cars for a long time and never had a motor burn out on me!

  • @christophergorbutt8225
    @christophergorbutt8225 3 роки тому +9

    For a lot of power wheels / Kid Trax you can if you like put a motor on the OTHER rear wheel on the opposite side and tie it into the same cabling (swap polarity on the motor) which will increase your torque and traction.

  • @alexwilliams7150
    @alexwilliams7150 3 роки тому +3

    Dads like us make the world go around

  • @FreakinFreedom
    @FreakinFreedom 3 роки тому +3

    Best video I've seen on the topic so far. Thank you! I put a 12Ah lifepo4 in my 10 month olds with remote control and just had an rx43/and 40,000 rpm motor delivered. After watching your video I think I'll get some slower motors until he gets a little older😂 the lithium battery already makes a nice difference.

  • @fredwaller9417
    @fredwaller9417 3 роки тому +1

    Your video may be the most informative so far! Thanks bro!!

  • @JohnNolteAudio
    @JohnNolteAudio 4 роки тому +3

    Loved the video, You should upgrade that wire to get the current to those new motors. I would recommend at least 12awg or larger.

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +1

      Yea I have some sky high wire lying around, I should switch everything out it would probably help with heat for sure. Why have been fun to mess around with.

  • @jeremysmith7224
    @jeremysmith7224 Рік тому +1

    That thing only had 1 motor? Thanks for the info. Ordered 2 of these for my daughter's corvette. The corvette has 1 for each wheel.

  • @aarontorok6389
    @aarontorok6389 3 роки тому +3

    So if you wire it backwards you can just plug it in backwards and it should work

  • @_DeFiNiTeLy_Not_BrAd_
    @_DeFiNiTeLy_Not_BrAd_ 2 роки тому +1

    I hope everyone trying this remembers to add an appropriate fuse when upgrading batteries. Would be a very different finish to the video if your test subject turns to test BBQ.

  • @colinmorand129
    @colinmorand129 3 роки тому +1

    Have you considered running a cooling fan for the motors- the clip on type straight to the motor would drop the temps.👍

  • @robpalmer2032
    @robpalmer2032 Рік тому +1

    why wouldn't you put a 24v battery and motor in? Would it last longer?

  • @weihu6066
    @weihu6066 2 місяці тому

    I was wondering if upgrading the a 12v battery to 18v can damage other electronics such as the light and radio ?? and if adding a hit sink can reduce the temperature of the 40k RPM motor

  • @jman866
    @jman866 3 роки тому +1

    Hello from Thailand 🇹🇭🇹🇭🙏🙏

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому

      How’s it going! Please share over there ❤️

  • @pelphrey
    @pelphrey 3 роки тому

    My DC motor keeps popping fuses and I’d be willing to bet this would fix it! Both rear wheels have motors I need to upgrade!

  • @wiradharma7030
    @wiradharma7030 3 роки тому

    I parallel 4 step up boost controller, put 0.22r 5w resistor on each + out. Then i bump up the motor voltage 20%. At first motor heat up too fast, then i drill a hole near the motor and attach 9cm ball bearing fan blewing out. Salvaged it from old cctv decoder. Small fan with high rpm, loud but it works😁.
    Been more than a year with that set up, still working. Now, I want to put higher rated motor. Btw, im using ups mf battery with more amps than stock one. A lot wider, but still fits.

  • @johnstutz4458
    @johnstutz4458 3 роки тому

    Hello Mr. Stutzman,
    John in Maine here.

  • @nikip5799
    @nikip5799 2 місяці тому

    Can the 12v 40000rpm run on a 12v battery? I recently switched motors out and now the power wheels does not move. The standard were 10000rpm motors. But one was grinding so I upgraded.

  • @user-uk6kt6sw8y
    @user-uk6kt6sw8y 8 місяців тому

    Is the gearbox universal can fit in any wheel like your child car? i just order one and afraid that it won't fit to my child car wheel..

  • @DR-tq8yp
    @DR-tq8yp Рік тому

    I bought my son one of those cheap chinese tractors off amazon. Its awesome, has features my real john deere doesnt have. I upgraded the motors from 15k rpm to 20k when one went bad. They were 10 bucks a pop and made a huge difference in the way the tractor drove. When he is sick of this thing i might get the 50k's and see if we can melt the wheels. The motors swap easy, juat had to solder tge original harness to tge new motor.

    • @DR-tq8yp
      @DR-tq8yp Рік тому

      Btw my cheapo motors came with a red dot next to the positive stud so i didnt have to guess

    • @DR-tq8yp
      @DR-tq8yp Рік тому

      Sorry to keep replying to my own post but i also think getting cheap higher rpm motors, and maybe a better battery that is still the same voltage, is a safer way to achieve good results with less work. Either way the plastic gears will probably shred eventually but if they don't, you didn't really try your best.🤣

  • @jeremygeorgia4943
    @jeremygeorgia4943 11 місяців тому

    If you put another motor on the other side, it could reduce the stress on the other motor. There seems to be a hole for the motor. The question is what the other wheel looks like. Some vehicles have a different wheel, that doesn't have a place for the motor to attach. In that case, you would probably have to order a replacement wheel, for the motor side. Some vehicles, however, have identical wheels, and a removable spacer, to take the place of the motor. That's the most ideal case.

  • @tomaszkus3652
    @tomaszkus3652 4 роки тому +1

    Let's just look for this 12v motor....to my princes audi rs8 ....I'm going to use 4ah 18v Bosch professional battery tho 👍🤓cheers .good video

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +1

      Thank you sir! Please share if you enjoyed.

    • @tomaszkus3652
      @tomaszkus3652 4 роки тому +1

      @@SkylerStutzman need to update what I discover .....well ...I was sure that motor was 6V...surprise...car has 2x 12V 16 RPM ....but 2 batteries 6v each and 4.5Ah ...both batteries r connected ....what's the solution here, please help....at the moment thing is weak and slow and last 45mins and slowly dies ...🤔🤦‍♂️I was hope that there is only 6V motor and single 6V battery ...how should I connect 18V 4aH bosch battery ?🤔thanks for any suggestions

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +2

      So the motors are 12volt motors; that’s good. The battery setup is two 6 volt batteries wired in series; to get to 12 volts. What you are going to do is take out the barter system and find the main power wire (Red) and main ground (black) and wire those into the 18 volt battery, 12 volt battery or whatever battery setup you like. Don’t let the two 6 volt batteries wired in series confuse the situation too much.

    • @tomaszkus3652
      @tomaszkus3652 4 роки тому

      @@SkylerStutzman ....well....car is no longer allowed in living room....burned 2 floor panels 🤦‍♂️...and have to replace them now..😡car is much more alive ....faster and stronger ...will need to get a battery adapter ...and figure out a fuse system to prevent the potential fire🙄cheers ...ps ...all works and even remote still control the car .

  • @fxxxaxxx6359
    @fxxxaxxx6359 3 роки тому +1

    I saw your video, very interesting but I wanted to ask you for information. I also have a 12 volt car and want to buy the same 40000 RPM 12 volt RS 550 motors. Will the car go as fast as your video? Or is it necessary to increase the volts?
    Ho visto il tuo video, molto interessante ma volevo chiederti informazioni. Anche io ho una macchina a 12 volt e voglio comprare gli stessi motori RS 550 a 40000 RPM 12 volt. La macchina andrà veloce come il tuo video? O è necessario per aumentare la forza i volt?

  • @pacmechoroni
    @pacmechoroni 3 роки тому

    Looking to get a Lamborghini Aventador ride on, it's 12v is conversion possible on all brands and makes but to 24v

  • @westfaliacentrifugal
    @westfaliacentrifugal 3 роки тому

    Great video, Sir! I have Just started to update our vehicle

  • @oneeyemonster3262
    @oneeyemonster3262 4 роки тому +1

    The powerwheels brand has different gearbox and the motors are 12V or 12 Turns.
    They're gear accordingly because different cars has different wheels size.
    I run them on 5s 50C lipo.(STOCK)
    They havnt burnout, yet. I do know they cant handle 6s 50C lipo.
    it also depends on the LI ON batteries you're using. Different power drill has different
    C ratings...( the 18-20V) are 5s 18650 lion...20C or 30C.
    I made 6s x3 2200 mah 15C pack ( 6600 mah)...but they;re used recycled at only 15C.
    so I increase it to 6s. The 5s LIpo at 50C still out perform it...due to higher discharge C ratings..But it;s close...it'll do power slides and donuts.
    I take them on 2 -3 miles drive or to the park all the time...
    Everything is STOCK.except for the Lipo batteries.
    I get the cars USED( $35-$50) for cheaper than the batteries.lol
    i have the Bug and quad..ive ran it on 18V....but most of the time I run it on 3s 50C
    for the 1 1/2 yr old...lol....All the kids learn on the bug.lol
    You'll go through wheels...becuase of the powersilde and donuts.lmao
    DO NOT put bike tires on the rear....it'll grip and jerk the car and WONT power silde/drift.
    You can get vinyln trim...( lower wall trims...$2.50 ea)...it's flat.
    It'll grip..but will still power slide
    Do use bike tires for the front...so it'll grip.
    If you dont...after the plastic wears...it'll UNDER STEER...or the car wont
    turn no matter how much they turn the steering wheel.lmao
    Or..gardening divider ( $30 p/ 3O feet roll) it's just 4mm thick flat harder plastic.
    It takes...work..becuase the plastic is stiffer. ..and you'll have to COUNTER SUNK
    the FLAT HEAD sheet metal screws..so it'll sit as flush as it can...So it WONT GRIP.lol
    They'll figure out how to do powerslide and donuts..It's sort of like a little bumper
    car for them. More work.....but it is what is. They wont drive it..unless it drift.lmao
    Or get used power wheels every month for $30..lol
    They're always on sale on FB market or swamp meets...ect
    I could had purchase 4-ea the other day...but i have 12 cars already.lol
    I have nephews and grand kids...it's like a mad house in my front yards..
    when I get 6 kids on powerwheels racing/drifting on 18v-20V.lmao
    Try installing another motor on the other side....but why..just get a used power wheels
    for $30.lol
    I have Not powerwheels brand 12V with 2 -ea motors... I ran it on 18V...
    The powerwheels gose faster...due to gearing. Th e kids wont ride it..becuase
    they know which one is faster.lol
    It a lender carlol

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Thank you for sharing all that info, that was a fantastic amount of info!

    • @jmj_d5207
      @jmj_d5207 4 роки тому +1

      @@SkylerStutzman would really love to see two motors on that bmw just bought one but my son tested it was screaming faster couldnt help with that but push the thing... now it just sits on the corner untouched...

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Something I still need to do for sure

  • @patrickgaudreau5230
    @patrickgaudreau5230 3 роки тому +2

    Did the motor lasted long enough? Thinking about upgrading mine while keeping the 12v battery but going from a 12000rpm motors to a 40000 thinks it would make a good difference?

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому +1

      It makes a pretty big difference, not as much as the battery though. And none of these modifications are for longevity. It is for pure fun.

    • @MsAleta1980
      @MsAleta1980 2 роки тому

      Have you had a chance to replace just the electric motor? If so, do you have to keep the original gear on the old motor? Or can you use the new gear that is smaller on the new motor?

  • @steel609
    @steel609 3 роки тому

    Great video! You have inspired me to tackle fixing my grand-daughter's FEBER Land Rover. 1 of the 2 6V motors burned up. I thought of putting in 2 12v motors, but can't find ones with 8 tooth gear. suggestions?

  • @chrismota158
    @chrismota158 2 роки тому

    I did this to my child’s 12v car…upgraded the battery to a power tool battery of 18v and got these exact motors she will drive for a bit and then the car won’t drive for a little bit so we turn it off and the. Back on and she can go again any idea on why it is stopping?

  • @ryanleicher8306
    @ryanleicher8306 2 роки тому

    Love you concept and wanted to know if you could provide some guidance on upgrading my little ones car. I am however located in South Africa

  • @martinplasencia9741
    @martinplasencia9741 8 місяців тому

    Preaty cool salute to you 🎉

  • @lincolnwheaty9749
    @lincolnwheaty9749 3 роки тому

    I got a Hot Wheels ATV hunting style for my 5 year old boy and I don't understand why you turn the steering wheel right and the wheels go left it didn't used to do that any opinions??

  • @nardos5448
    @nardos5448 2 роки тому

    Between all the motor upgrades I’m surprised that little rubber strip on the plastic wheel grips.

  • @Tomi_gun88
    @Tomi_gun88 3 роки тому

    Hi, I have also a 6v battery car with a 6v motor. I changed the battery with a 12 v, it didn't fried the motor, but the motherboard wasn't so lucky. Luckily I found a second one, exactly the same( don't ask, my son just want it). Here is my question, how do I use better 12 v battery and 12v motor without breaking the mother board? Thank you.

  • @TuanTran-th7xo
    @TuanTran-th7xo 2 роки тому

    Question: How do you charge it? Can you charge it using normal power wheel charger or do you have to take the batter off to charge it separately?

  • @HighPowerXH
    @HighPowerXH 3 роки тому +1

    These drill batteries do not have low voltage protection. A better idea is adding a low voltage cut off board and they are quite inexpensive compare to a battery

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому

      For what reason exactly?

    • @HighPowerXH
      @HighPowerXH 3 роки тому +1

      @@SkylerStutzman lithium batteries will be permanently damaged if over-discharged

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому

      You mean like when you use them in your drill and run it completely out of power.
      I think you are mistaking lithium and lead acid batteries.

    • @HighPowerXH
      @HighPowerXH 3 роки тому

      @@SkylerStutzman nope, the tools won't start under a certain voltage. But no protection circuit on the battery itself. You can do a quick search to tell if I'm right or not Here is one havocware.com/power-wheels-milwaukee-battery-run-time-tests-low-voltage-protection-installation/

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому

      I’ll take a gander. Thanks for the info!

  • @michaelgerschwiler9298
    @michaelgerschwiler9298 4 роки тому +1

    So i ordered the 30kv 12v and it fried the first day but the stock 6v lasted over a month on 18v milwaukee battery.

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Michael Gerschwiler that’s so unfortunate. I too have had the same thing happen to me

  • @kesslermo
    @kesslermo 4 роки тому +1

    So, 18 Volts won't burn up the controller or lights in this model? Been wanting to convert one of these for my son with two 6v or two 12v motors and 18v battery.
    Thanks

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +1

      Have had nothing but success over here. I offer no warranties however! 🤣

  • @micaellevesque2869
    @micaellevesque2869 2 роки тому

    Hello,
    Do you know a website other than Amazon to order parts? Also, it would be nice to have a lexicon with the names of the parts. It would be easier to search for the parts on the net afterwards.
    Thank you very much for the video!

  • @trinity343
    @trinity343 Рік тому

    So i'm looking at doing my first mod on a ride on (Blazin Wheels 12V UTV Wild Cross). Got it free from a neighbor and while it seems to be charging the battery, the car won't go forward and backwards for more then about 2 seconds.
    I'm following the link you have for the 40k and you had mentioned in the video that it had the metal gear, but the amazon page shows it as having a plastic gear. is there a different one to use at this point? Though I'm basing it off the first picture and the inner gearbox picture and the show plastic gears

  • @mohi3193
    @mohi3193 3 роки тому +1

    The wheel is not moving for me what should I do?

  • @dentinhoskt
    @dentinhoskt 4 роки тому +1

    I have a car like this and it has an RX18 12V (15ah) receiver and 2 12v 12000rpm motors. It came with 2 6V 4ah batteries. For an upgrade, what I did was buy 2 new 12v 35000rpm motors and a 12v rx43 receiver (40ah). Now that I have installed everything the car has no power to pull out it and I just don't know what to do. When it finishes charging the batteries it has the power to pull out well or 2 or 3 times at inclined location, but if it's at a straight track it pull out normally and get high speeds. If I need new batteries, what is the best combination? 2 new 6V batteries powerful, 1 new 12V or 2 new 12 batteries?

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      I would switch it over to a Milwaukie battery at 18v

    • @Jessehernandez83016
      @Jessehernandez83016 4 роки тому +2

      @@SkylerStutzman hey how has this setup worked for you ... my son is 4 ... and want to make his car faster ... ...but i dont wanna be switching motors want to say set it and forget it after i do it ... lmfao

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Get a voltage regulator off amazon. I left links in the description of everything you should use to have a wicked setup! 🍻

  • @ballsachotdog
    @ballsachotdog 3 роки тому

    Great Video. Does the BMW come with a circuit board? I'm reading that the circuit board will fry when converting to 18v. Wondering if you've experienced that issue.

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому

      Some cars seem to have issue with while others do not. None of mine have had any issues. It’s more of a gamble than anything, however if the original motors go then it’s not much of a gamble.

  • @huntercaston2288
    @huntercaston2288 3 роки тому +1

    Anyone know where I can get a replacement model
    For a Mercedes Benz g63 12volt for a kid I bought one but I can’t get the axel ! Company won’t help

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому +1

      Links in the description

    • @huntercaston2288
      @huntercaston2288 3 роки тому +1

      @@SkylerStutzman Are you responding to my call for help lol not sure how this whole thing on UA-cam works but it said I had a message or a response hope all is well don’t even know you lol lol

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому

      Yes, I left links in the description that will take you yo amazon. From there you will be able to find a lot of different things for these cars!

  • @fxxxaxxx6359
    @fxxxaxxx6359 3 роки тому

    I have a 12 volt fiat 500. What should I do to increase it to 18 or 24 volts? What do i need to change?
    ho una fiat 500 a 12 volt. Cosa devo fare per incrementarla a 18 o 24 volt? Cosa devo cambiare?

  • @shaunsprinkle2424
    @shaunsprinkle2424 3 роки тому

    Would this work with a Remote control driven as in I have a remote I control the Range Rover what's it called

  • @MrPhatties
    @MrPhatties 2 роки тому

    If you want to save those motors get a large (500uF) capacitor that is more volts than your motor (50V for a 20V battery) and put it between the positive and negative on the motor. It acts like a shock absorber for electromagnetic spikes inside the motor when you're running higher voltage and start/stop like these things do. Blew a few before learning this trick. Keeps temps way down.
    You can also put a self-recovering fuse inline so that if the motor is getting too hot that fuse will trip instead and stay tripped until it cools down.

    • @lukeschlitzer5460
      @lukeschlitzer5460 2 роки тому

      Hey Doc, got a link?

    • @MrPhatties
      @MrPhatties 2 роки тому

      @@lukeschlitzer5460 Amazon has. You'll notice there is usually one on the stock 6v motor already.

  • @DadHacks
    @DadHacks 3 роки тому +1

    Did you consider adding a 2nd gearbox?

  • @224ENG
    @224ENG 4 роки тому +1

    Looks great but you can make it even faster.

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Thank you, I believe I just need deeper pockets like yourself.

  • @KwanTsuDude
    @KwanTsuDude 4 роки тому +1

    Super helpful! I've got one of these things laying around the house and you're right...it's slower than dirt. Would it make the car even faster to do 2x 12v motors? This is going to be my first foray into modded ride-ons

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +1

      It won’t make it any faster but it will split the load between the motors thus creating less heat and failure of the motors themselves. All the load being on one motor creates a lot of heat, heat over time leads to failure. Thank you! Make sure to subscribe and share the video on Facebook or something, everything truly helps out the channel!

    • @KwanTsuDude
      @KwanTsuDude 4 роки тому +1

      @@SkylerStutzman right on. thanks for the help! Now I just need to make sure I get this PWM module wired correctly. I'm thinking to do 2x 12v motors with 2 larger 18v batteries wired parallel so we can get nice long rides out of it

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +1

      The lithium batteries from our drill batteries will last a very long time. One 4ah battery last about 45-60 minutes of continuous run time. Cheers, report back and let us know how it went.

    • @KwanTsuDude
      @KwanTsuDude 4 роки тому +1

      @@SkylerStutzman would running two motors cut that run time in half?

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      That would be a good question. I think it would have an effect on the battery life for sure, however. You will be running much more efficient, therefore I think that will cause less battery draw as well as the sustainability of a longer lasting setup. Only way to find out for sure would be to test between the two, however I would highly recommend just doing whatever is the easiest and enjoy it. Don’t make it too much of a science experience, after all the kid probably won’t care. 🤙🏼🤣

  • @desirehd8
    @desirehd8 Рік тому

    You use single motor or double motor ?

  • @Jessehernandez83016
    @Jessehernandez83016 3 роки тому +1

    Hey man i need some hel with the wiring

  • @daveknott4563
    @daveknott4563 4 роки тому +1

    upgrading my kids 4 wheeler like your pink one. Blew the motor with 20v Dewalt to the 6v motor. Put a drill motor in there, but still slow. Can you post a link or do video to the pink quad with regulator?

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +1

      DAVE KNOTT I will do a video here soon. Stay posted. 🤙🏼

    • @daveknott4563
      @daveknott4563 4 роки тому +1

      @@SkylerStutzman thanks, I looked around but didnt see much on that mod topic. Much appreciated, even if it's a quick video. I have a feeling with the regulator it still has a cap, though allowing the full voltage to pass through increasing speed?

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Doesn’t have a cap. You will be able to turn down the voltage that the motors are seeing from the battery regulating the speed of the motors to your comfort level per child.

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +1

      Links to all the things I am using I left a link in the video so that you would be able to find these mods a little bit easier. The 3D printed blocks to be able to mount your dewalt drill battery or Milwaukee is a very nice feature to have that makes everything very clean.

    • @daveknott4563
      @daveknott4563 4 роки тому +1

      @@SkylerStutzman saw the links, and always much appreciated!

  • @TheReaL35
    @TheReaL35 3 роки тому

    #Culdesac life...well done sir

  • @marcocasillas9673
    @marcocasillas9673 4 роки тому

    Skyler, I upgraded my child’s i8 with the parts you recommended. I’ve switched the battery out now maybe 6 or 7 times. Lately it will run for about 3 seconds and then turn off, after about 5 seconds it turns back on. I hear a small click inside the motor when it turns on back. You think I fried it already? FYI I left all the wiring stock so the fuse is still there as well, not sure if this is tripping it.

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Email me some pictures so I can see your setup and help you out if I can!
      Stutzmanskyler@gmail.com

    • @josephalba9132
      @josephalba9132 3 роки тому

      Ever get a fix for this my little mans i8 is going through the same thing, I am about to gut the controller for steering and just wire with micro switches and batteries.

  • @Fuzz.Buzz.Stop.Motion
    @Fuzz.Buzz.Stop.Motion 4 роки тому

    Great video, that kid can drive! I've got a twin motor Hummer that I want to upgrade to run on grass, about to install 18v, but what motors do you think would be best? Torque more important than speed! Thanks!

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +1

      madbroon95 I have ran many different setups but I would be more curious to see how it does on 18 volts first before changing the motors. The stock motors can last a long time without replacing them. I have links down below to batteries and the 3D printed battery holder to get a proper setup going for your Hummer.

    • @Fuzz.Buzz.Stop.Motion
      @Fuzz.Buzz.Stop.Motion 4 роки тому

      Thanks for the quick reply! I'm going to try it on my 18v Makita batteries and see how it runs then. Bought a speed controller too, it was a free broken Hummer from Facebook but hopefully the motors will last a while with the 18v!

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      @@Fuzz.Buzz.Stop.Motion report back and let us know how it goes.

    • @jonathonvisser1715
      @jonathonvisser1715 3 роки тому

      How did it go? I'm interested in doing the same thing.

    • @rjzhelchann3l406
      @rjzhelchann3l406 Рік тому

      Hi did you change 12v controller board also? The one you can use remote for the car thanks

  • @Jessehernandez83016
    @Jessehernandez83016 3 роки тому

    How do you wire the voltage controller.? Just ordered parts for the same car and was curious?

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому

      Battery to voltage controller i,n voltage controller out, to motor

  • @MCRideout
    @MCRideout 4 роки тому +1

    With one motor is it one wheel drive?

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Yes it is! It does very well as you can see, but I think it would def do better if it had two motors.

  • @clava011
    @clava011 Рік тому

    Remote controller board is too hot, car stopped

  • @revoltapparel7424
    @revoltapparel7424 3 роки тому

    How long does it last on a Milwaukee battery? Sorry if it's been asked before.

  • @stevenrogersfineart4224
    @stevenrogersfineart4224 2 роки тому

    She's too cute. I did something similar to my sons car and he wouldn't drive it LOL

  • @ivanaguilar5314
    @ivanaguilar5314 3 роки тому

    My daughter have the same bmw and I just did the upgrade to use my Milwaukee 18 volt battery but the car stops after a while all of the sudden and then starts after a few seconds.
    Did you remove the thermal fuse on yours? I still have it on mine and maybe that is what it causing the problem

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому +1

      I did take that fuse out of the equation.

    • @ivanaguilar5314
      @ivanaguilar5314 3 роки тому

      @@SkylerStutzman Thank you for the quick reply. I will remove the fuse as well.
      Have you had any issues with the wiring getting to hot after removing it? I do have an in-line fuse holder that I can install. I am wondering a 20A fuse will work as a replacement for the thermal just to have some kind of protection

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому

      I honestly rock no protection, I am always watching however.

    • @IanRobinson870
      @IanRobinson870 3 роки тому +1

      @@ivanaguilar5314 30A fuse seems to be commonly used. Get the kids to use it for a solid 10 mins and feel the wires. If they are not too warm you should be fine.

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому +1

      ^^^ what he said

  • @keefyboy4601
    @keefyboy4601 4 роки тому

    Is there a video of how’d you connect the Milwaukee battery to the car?

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      On this car I just have the positive and negative plugged straight into the battery. However there is a 3D printed Milwaukee battery adapter that I have since put on all of my cars. I left the link in the video for you to be able to find easily! 🤙🏼

    • @keefyboy4601
      @keefyboy4601 4 роки тому

      Also does the motor have to upgraded if swapping to an 18v Milwaukee

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      I ran the original 6volt motor until it blew

  • @thekyroshon
    @thekyroshon 3 роки тому

    Do you have to wire in regulator or fuses or anything, or just run it straight to a DeWalt battery from the motor?

  • @joshuacampbell5673
    @joshuacampbell5673 3 роки тому

    7 months later, how are these holding up? Thanks!

    • @SkylerStutzman
      @SkylerStutzman  3 роки тому

      Joshua Campbell I have gone through another motor and have converted a couple other power wheels over to 18volt. Heat is the killer in these things. The more they ride them the more likely they are to kill the motors.

  • @garrettoneil3864
    @garrettoneil3864 2 роки тому

    If it's a 12 volt why not put a 12 volt motorcycle battery

    • @dpboy8
      @dpboy8 Рік тому

      Because an 18v drill battery can supply way more power

  • @Vibe_xvo
    @Vibe_xvo 3 роки тому

    I have the exact same car and I can’t get mine to work

  • @michaelgerschwiler9298
    @michaelgerschwiler9298 4 роки тому +1

    Did u use the stock esc on the bmw?

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Yep, changed nothing else out tbh

    • @michaelgerschwiler9298
      @michaelgerschwiler9298 4 роки тому +1

      Yea i raced rc cars for years and i juat bought the bmw for my daughter couldnt wait to get my hands on it haha nice vid btw.

    • @michaelgerschwiler9298
      @michaelgerschwiler9298 4 роки тому +1

      Do u think i should get the speed controller for it though just incase or dont worry about it? Like for backup.

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Thank you very much

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +2

      As you seen on the pink quad, I installed a controller. It makes it nice so that you can put it exactly where you want it. Worth the 18 bucks I suppose.

  • @kevindaley7103
    @kevindaley7103 4 роки тому

    If direct power straight to the motors you can get 15mph off 12v battery

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Do you have a video or something I can watch this from. That sounds awesome. Would love to see how to gain anything more from these things.

    • @kevindaley7103
      @kevindaley7103 4 роки тому +1

      @@SkylerStutzman I just have on off switch hooked under the pedal and when it turns off the gears will slow it down to a stop in a second. My son weighs about 45 lbs now and he still rides it and calls it his drift car cause the wears spin so much with those plastic wheels but couldnt afford all that extra stuff and we picked it up from DI for $5 and I did put the 18v dewaukt drill battery in a for a minute but someome was going to get hurt so i took it out lol

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Hell yea! Well thanks for stopping by. If you liked it do me a favor and share it, much appreciated!

    • @kevindaley7103
      @kevindaley7103 4 роки тому +1

      @@SkylerStutzman I'll find it and share for sure

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому

      Thanks!

  • @MaksAMD
    @MaksAMD 4 роки тому

    how long does that battery last?

    • @SkylerStutzman
      @SkylerStutzman  4 роки тому +1

      About 45-1hr of continuous run time. Easily.

  • @Pou_plush_advertis
    @Pou_plush_advertis 3 роки тому

    Should just go brushless, and never change motors again. Its not too complicated converting to brushless..

  • @mindovermatter3988
    @mindovermatter3988 3 роки тому

    With those $14 Motors you're getting why don't you spend an extra ten bucks and get yourself some heat sinks for a 550 case motor. And some small 40 mm fans. That's what I did and I'm running 20 volts on a two stock 550 case Motors. And with the heat sinks and fans they run sub Ambien Even In the Heat of the day

  • @avalonfireguy
    @avalonfireguy 3 роки тому

    Im doing this but those wheels annoy me too loud lol