Audi MMI 3G Plus Update | Firmware | Maps Activation
Вставка
- Опубліковано 3 жов 2024
- This update was a challenge for me because it was not as simple as it was with the MMI 3G. I will have to tell you from the beginning that this update will take place in about two or three hours.
As you will see, at first I did the Firmware update because there were no updates made from 2013 in my friend's Audi A4 S line.
This first update has to be done with the motor ON because there is a risk when doing this just with ignition on. The biggest danger is that your battery will drain and the system will automatically turn off (MMI, lights and everything that uses the car's battery) and there is a big chance you destroy your MMI.
The Firmware update takes about 30 minutes and in this time you can drive your car but without tunrning the motor OFF!
After firmware we have to update the Maps with the latest version. We did this update in a place where I know that in the last 2- 3 years appeared new streets is town.
The Maps Update is taking longer so I recomend taking a laptop and watching a movie or some beers. You will have to wait about two hours (there are 32 GB informations) with this update but it worth! You will have all the Europe and all the POI (points of interest) you need.
After you update maps, it is very important the last step: Maps Activator. Without this, your MMI will work for o while and than you will get the message in MMI: "The Naviogation Data is Blocked!" and you will not be able to use the navigation.
"Music: www.bensound.com"
Danke für das Video, werde das MMI und die Karten updaten werde berichten, ob es geklappt hat :)
Gerne! Ich warte auf deine Rückmeldung!
Hat funktioniert 😊.
Das Kartenupdate habe ich auf Benutzerdefiniert gemacht, einmal kam ein Fehler wo ich auf erneut versuchen gegangen bin, ist dann aber so durchgelaufen 👍
Nochmal Danke schön es funktioniert alles sehr gut, bin ser zu friden! 👍😊
Wo hast du das heruntergeladen
www.clubaudi.ro
This guy posts video's about the process without the actually download links.
Dann kannst du es auch gleich lassen. Ist ja toll für dich, dass dein Audi nun ein Update bekommen hat.
THANKS everything was exactly like in video thx for help very easy
You are welcome!
Es hat mit dieser Anleitung super funktioniert....
Hallo, muss man noch auf etwas achten wenn man eine Bose Soundanlage besitzt bei der Installation?
praktisch, mann muss nur wissen woher man die software bekommt.
Servus! Hast du es mal gehabt das dass Navi keine Ansagen mehr macht ? Ansagen sind im Menu angeschaltet und Lautstärke ist nicht gemuted. Bestimmt schon mehrmals FW und Maps neu installiert leider ohne Erfolg.
where do you find the firmware and maps update? I have a 2012 A5
u can find it on google
hello thanks for learning us but can you give me the lik of mao update i have an audi a6 2012 with mmi3+
great vid. He doesnt show download links because it is copyrighted material. That's on you to source.
I followed it all and it works except it wont update my maps... im thinking it doesnt like the file and it may be corrupted. i have heard you can do it manually , and i have enabled it in green screen but there are so any options after that im thinking i wont touch it.
Wo kann ich mir die dateinen dafür runterladen?
Top tutorial, but I have the problem that updating the maps the update button is grey and kan not start the update, any idee?
Thanks in advance. Regards Adrian
Thanks! I just think that the maps are not the ones for your car/mmi model
Where can I take the MMI 3G+ update from? Where can I download it from? Thank you!
Hello what update do I ned for a4 b8 2012 as it saing no version
How does the display show the internal temperature? I saw it in the lower left corner
I don't know because it was my friend's car and I didn't pay attention to that. Maybe in the MMI menu is something. Or it was just the outside temperature
It’s the temperature u‘ve set up on air condition, not the internal.
is it possible to update the maps themselves without updating the system? Will the maps work?
Hi! It depends. If you have the latest firmware, you can simply update just the maps, every year. If you don't have the right firmware, your MMI will be blocked.
Do you have middle east maps ? my system is HN+ K0942 and i need the below
8R0060884HS ME2 5.13.4
No, sorry, I don't have them
Where can I get the firm ware? Please
can you help me please i bought software link but i can't do it please help
From where can I download this software?
Does the activation disk only work once? I updated firmware installed maps then did activation but for some reason not worked properly, i get initialising maps but locks at 44% so went again, but now at the end of installing maps the activation disk is not recognised, any help appreciated
I think you need the right activator. Try on a local Audi forum in your area.
Muss der Motor beim Kartenupdate auch laufen?
Ja, muss laufen. Kannst du auch fahren das Auto für etwa 2 Stunden.
@@CiprianChicano danke
I have "bose". Is the procedure any different? I understand that it is risky if I "bose" in the car
just dont update Bose, thats all!
Salut! După ce instalez activatorul și îndepărtez cardul, nu trebuie introdus din nou cardul cu hărțile, și sa rămână tot timpul în SD 1?Am reușit sa fac update de firmware.
Dacă mai țin bine minte, hărțile se instalează pe hard-disk, nu mai ai treabă cu SD-urile. Cum ai reușit sa faci update la firmware?
Moin, ich habe ein US ReImport Fahrzeug und die Version vom MMI "US TO EU" kann ich diese Software trotzdem Updaten?
Hi! Ja, normalerweise kannst du machen. Zuerst Firmware aktualisieren und danach the New EU Maps
hello !! again !!! I could update my MMI for this one that I see more modern with the vision of the car on the screen and others ..?
If you only have mmi 2 or 3 basic it will cost you mega amounts of money updating to this version as the hardware has to be replaced.
Ok..si de unde doamne iarta-ma luam fisierele pentru update??
Salut! Am mai răspuns pe aici, nu e greu deloc. Intri pe forumul Audi din România si cauți pe Benone. El te ajuta cap-coadă. Are softuri la zi pentru toate modelele de mmi. Găsesc si link-ul imediat. Eventual, spui si de unde ai obținut informația si poate primești un discount :)
www.clubaudi.ro/threads/efectuez-update-navigatie-mmi-3g-dvd-3g-hdd-3g-plus-harti-eu-ro-2023-radauti.48514/page-8
@@CiprianChicano mersi de raspuns. O sa caut singur fisierele pe net.
@@adrianromanenco3798 il gasesti pe torente
Salut cum as putea lua legătura cu tine pentru update
Need firm ware for my a3 8v
Salut ,am si eu un a4 b8 2008 mm2 si nu imi mai afiseaza clima .
Merge tot cald rece ,doar ca nu o mai afiseaza ,nu vad temperatura ,oare ce o avea ?
Ai făcut vreun update in ultima perioada la maisna? Daca da, posibil să fi afectat si akte opțiuni in mmi (informațiile despre baterie, limita de viteza, etc)
@@CiprianChicano am facut dpf off si am fost sa anuleze si din soft ,dar a zis ca a umblat doar la fila pentru dpf .crezi ca se poate face update la soft ,adica sa fie asta problema ?
Sa fie problema de acolo ?
Wo kann ich mir die dateinen dafür runterladen?
Bei Audi um die 200€ 🤷♂️
Before you start MMI 3GP firmware update have you select “Define User” in hidden Green Menu?
No, I didn't do that. All the steps are in the video. This guy has not even green menu activated
2:20 “Device selection” - have you select or de-select anything from the list?
@@alexandergrigorov2594 no, just scroll down and update
It looks this update was done sometimes ago. Do you know what the latest firmware version available?
@@alexandergrigorov2594 I don't think that there are any new available firmware updates but for the maps there is an update in 2021
ok cool but.....WHERE DID YOU GET THE UPDATE FROM....
you can find it on google
Please let me know how can i get those data for my Audi A7 (2011) . The car is using in myanmar and navagation is not working at on MMI at all ( just plane screen)
If the updates files can be purchased, i would like to do so.
Thank you
Hola alfinal que hiciste para arreglarlo ? Tengo el problema parecido
Which website is for to download update.
for 3g willbe ok?
y
Hi, I've HN+R_EU_AU_K0770
Nav database
8R00608844AH ECE 5.13.8
which version do I need to upgrade first?? Can I upgrade straight to K0900???
Thanks
K0942
@@claudiu1178 And P1001 ?
@@Djmachizmo123 HN+ ?
@@claudiu1178how do you know this information ?
For firmware engine one, map update 2 hours ignition?... why not use a battery stabilisator🤷♂️
You don’t need Ignition for this
@@Briesmihow does update start then without mib2 on..mib2 dont go on without igntion or engine on? Without ign normal mib2 wil go off after 10 min, can sleep..
@@anthonyg87 It’s MMI 3G in the Video. And it won’t go to sleep while updating. I think MIB2 is the same.
@@Briesmi i work a lot with mib2 units(vw/skoda/seat) they al go off after 10min due to can sleep. Otherwise it would drain battery if it stays stand-by. For mmi3g i expect the same.
@@anthonyg87 , no. 1st: you can expand the power off in Green Menu up to 30 Minutes. 2nd: It only powers off if you don’t use it. While updating its in use and won’t power off. Believe it or not, it’s a fact.