Hardwire Kit For Parking Mode - VIOFO A129 Pro Duo Dashcam
Вставка
- Опубліковано 22 сер 2024
- In this video, I will show you how to install the VIOFO HK3ACC Hardwire Kit for the VIOFO A129 Pro Duo Dashcam. This will allow you to enable the parking mode on this dashcam. I will show you examples of different parking mode recording modes.
* For the ground wire, you need to secure it to a grounding bolt under the dash. Look around under the dash for a screw or bolt that you can loosen and then insert the ground ring terminal to it and secure it.
========
Buy VIOFO A129 Pro Duo Dashcam
US: amzn.to/3RoP39T
CDN: amzn.to/38S8a69
Buy VIOFO HK3ACC Hardwire Kit
US: amzn.to/39I3QWm
CDN: amzn.to/2UWb97z
BUY FUSE TAPS:
ATO/ATC Fuse Tap:
US: amzn.to/2NmH4fL
CDN: amzn.to/2nwqLS1
Mini Fuse Tap:
US: amzn.to/2wR0G24
CDN: amzn.to/2m6ins3
Low Profile Mini Fuse Tap:
US: amzn.to/2wUzkqQ
CDN: amzn.to/2ltHHrS
Micro2 Fuse Tap:
US: amzn.to/2MSBtOJ
CDN: amzn.to/2mWMG4P
BUY FUSES:
ATO/ATC Fuses
US: amzn.to/36pxGgN
CDN: amzn.to/2RtqdZY
Mini Fuses:
US: amzn.to/2sWVpqZ
CDN: amzn.to/2RQKCqC
Low Profile Mini Fuses:
US: amzn.to/38PkmUH
CDN: amzn.to/37DlaLO
Micro2 Fuses:
US: amzn.to/2vo5Btt
CDN: amzn.to/2RrF9I3
BUY TOOLS:
Car Panel Removal Tool Kit 18pcs
US: amzn.to/3jGH34l
CDN: amzn.to/3ArxlcK
Angled Push Pin Pliers
US: amzn.to/3yE8LVG
CDN: amzn.to/3fUhCeB
Auto Ranging Digital Multimeter (Test: volt, ohm, amp, diode, etc)
US: amzn.to/2JSSHrB
CDN: amzn.to/2PKPCxI
Professional Wire Stripper
US: amzn.to/2REssbn
CDN: amzn.to/2lRA1jr
=========
Watch VIOFO A129 Pro Duo Review Video
• NEW 4K VIOFO A129 Pro ...
Watch Another Hardwire Kit Install Showing Ground Connection
• How To Install Dashcam...
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com...
CDN: www.amazon.ca/...
=======
Support Dial2Fast on Paypal
www.paypal.me/...
Support Dial2Fast on Patreon
www.ptreon.com...
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.
An excellent video! A word of caution- Although I did not witness this tidbit in your video, the fuse tap orientation is very important to be where the power actually goes through the fuse and not bypass it. Be sure to check which leg of the fuse block is hot and face the tap in the opposite direction from the hot side.
Excellent bit of advice. Have you come accross any video which shows this in details?
ua-cam.com/video/C4CkStK45io/v-deo.html gives a good overview of things to look out for
@@Checkmate025 he goes over it in this video, William just missed it
This important step is mentioned 3:16. You need to test with a volt meter or circuit tested with the fuse out of socket.
ua-cam.com/video/qBbOZu59rhw/v-deo.html
Please never delete this. I have this dashcam and there's so much options. This is an easy way to understand it if you haven't checked your dashcam settings in a while. Thanks so much. 5th time coming back
Just download it.
Also worth mentioning, the new fuse being added must equal to or have less amp rating the original. Additionally, avoid tapping into critical power circuits such as onboard computer, air bag etc.
Not quite. The new fuse you install would be 3amp max for the camera itself. The original fuse will stay the same. The piggybacked fuse doesn't go through the original fuse, it spurs off of the connection before the fuse so it doesn't need to be less than the original.
Wow, such a simple and informative video definitely deserves more views and likes, thanks for making this wonderful video explaining parking mode and constant recording.
Thanks for your wonderful comment!
He just spoke so damn fast lol
Should have show black ground wire aswell where we should attach it other wise very well explained
To any ground. Unscrew a bold and attache it on a non plated metal part.
Best installation and informational video I have seen. The manufacturer couldn't have done better!
Hey thanks man 👍 I have ordered A139, hardwire kit and fuse taps. Before this video, I had no idea how any of it will work. Cheers
Thank you for such an in-depth and informative explanation of how to install this camera. Usually, videos like these skip specific steps, but you did not. Thank you!
Looks a very nice camera - How do you know that electrical parts bat-2 is 12 volt, why didn't you use Elec Parts (Bat-1) ?
When you turn off the car how do you know it is recording in parking mode? is there any lights or something?
It would be nice if you showed examples of triggering the parking mode to record with detecting g-shock
lol, I can just see him hitting his car with a rubber mallet trying to get the g sensor to kick in 😂😂
Also... in parking mode .. can the rear facing camera capture motion and start recording? or in order to start recording motion needs to be detected from the front facing camera? thanks
I have the cam an no matter how hard I mimick the hit in park mode by ramming in to car and shaking it (like if someone reverse into it) it will not trigger the g sensor and only motion detection works, so beware if you want this cam exclusively for g sensor parking mode
@@jhovanylopez1897 Either one of them if they detect movement nearby your car it will automatically record an event for 45 seconds. 15 seconds prior and 30 seconds after.
@@pimpplayer4ever1 so without a human walking by or a car driving by it won’t record while parked?
Does the camera notify you if there was an event during parking mode?
No it doesn’t you gotta check ur car for damage before u enter
No it doesn't notify you if there's an event, you need to check the city if there's parade or flea market or fire works event.
@@waynet8327 BS I need a cam that will tell me when the free concert in the park is happening.
@@kind2311 Blackvue is what you want. 750 or 900. More pricy but better with parking mode.
@@snzjavi I got a Viofo A129 Pro Duo. $350 after adding 256gb SD card, hardwire kit, and shipping.
Fantastic video man. Thanks for taking the time to do this.
great video mate.. cheers... am confused about one thing... I have watched a few of these videos from various youtubers... a couple say you should plug the constant power cable in the other available insert on the side... does it matter which plug insert you put the constant power supply in?
Also interested in this answer. The Pro comes with a gps module installed that requires its own power, which is what he plugged into on this video. Very interested to see how he has the cam powered.
Great video , for parking mode what mode do you use or recommend? Like 5 FPS or low vide bit rate eccttt...
This is one of the best videos how to install your wire..thanks man awesome job...
very clear and step by step instructions. give u a thumb up.
Thanks! I was curious on the switch setting. I drained the battery too low initially… 🤦♂️
How do you test and know it's in parking mode? Do you have to set the hardware kit to certain voltage?
When parking mode is turned on in the settings, there will be an icon of a car in the top left corner of the LCD screen (this just means the setting is on, not that it's in parking mode). When you turn off the car, the camera should enter parking mode within about 5 seconds. When it enters parking mode, the icon of the car will change to the icon of the chosen parking mode. So if you chose Low Bitrate, the icon will change to a video camera. Auto Event Mode will change to a stick figure. You can set the voltage to 12.4V on the voltage selector to protect your car battery.
Great video, very helpful... BUT, can you explain why there are 2 fuses on the fuse taps... the fuse you pull from the spot your going to tap into goes in side of the tap, but what's the other fuse doing? and what rating does it need to be?
There are 2 fuse taps because one if constant 12V providing battery power when ignition is off (parking mode recording). The other fuse is ignition 12V providing power when the car is running and driving (normal recording). Both fuse rating can be 5A or 10A.
@@dial2fastthanks, I was asking why there are two fuses on each tap… I found his video explains why. Thanks!
I have a question.. can you adjust the sensitivity of the motion detection? I noticed on the viofo a119v3 you can do this, which is great, but I haven’t seen it in the menu of the a129 maybe it’s out dated firmware
Yes You can, Low, medium and high
How you do the fuse wires on Toyota Tacoma 2006 ? Like which one will be
Great video. I want to know the plugin on the side, where does that go to
What is the fuse did you get for your Pathfinder. I have the same car and want to know which one to get since you have 3 different version listed.
I have 2019 Kia Cadenza and the only fuse that worked for the yellow ACC wire was actually cigarette lighter socket fuse. My car turns off power to it as soon as I stop the engine. Any other Radio or Audio fuses did not work. For constant on Red wire I used power seat or later I connected it to the door lock fuse. This this thing (Viofo A129 Plus Duo is great dashcam)
How much battery does the parking mode consume? Can we record ~12 hrs in that mode continuously?
Yes that should be easily achievable.
Are you running 2 hardwire kits???
One for GPS and one for the camera?
The fuse section...what you glossed over in 10 seconds I've been working on for 3 hours now. My fuses aren't labeled what yours are. 2018 Focus ST
Use a test light
Get a test light screwdriver for £4
Get multimeter and find which one gives 12 volts, use youtube to teach you how to use it
@@Weebwhacker then how do you find the ACC? I have 2017 Sienna and it's nothing like this
Can you set the dash cam parking mode so that it only activates when it detects a g-sensor output like when someone bumps into the car or tries to open the door/vandalize etc?
You can set the sensor to Low, medium or high detection
Ok so I wasn't sure which fuses to tap even though I checked with a voltmetere and I think I got it right. I got it all setup but when the car is off, and it's on auto event detection. The Viofo will just stay on, stay recording, and the screen will pop up everytime a leaf goes by or anything. Did I do it incorrectly?
I assumed the screen would stay off (to preserve batt). This seems like it would drain the batt super fast. Thank you good sir! Amazing video.
Very nicely done Sir. Thank you
Interesting ! I've understood better how I have to set my HK4 kit with my fuse box.
All your dash cam videos are excellent! What would be your pick for $200 or less with parking mode? Your recommendation would be greatly appreciated!
If you are in the US, I recommend the FineVu X500 from S Korea. It's a 2 Channel dashcam will great performance. Retail for $170. Here is the review video and buying link in description. ua-cam.com/video/JSID_fP9-1Q/v-deo.html
@@dial2fast Hi. How many hours of recording in park mode can you get before the 12v cut off? Thanks in advance
Hi. Great video tutorial. I have this camera. For parking mode, must you plug the power source into the GPS unit (not the side of the camera)? I am using a Cellink NEO Battery pack plugged into a cigarette lighter. The camera is plugged into the battery. Thanks
Super video… very clear, thank you!
I used to have an LG dash cam and we started having battery issues. Ended up being wire corrosion in the car that was draining the battery, do you think the dash cams parking mode was causing this? Dash cam ended up breaking and i want to get another one but im scared of the wire corrosion happening again...
I'm shocked how of all the mega-informative videos there are on yt installing this kit not one mentions the big cylinder attached to the cable that you are supposed to cram into your headliner when running the wire!
Just to clarify, if I want to use the parking mode, left over night, set on 12 v the camera would automatically turn off, so not to drain the car battery, roughly how long does it record b4 it turns off, I really like this can, but want to know everything about it
To transfer files to mobile phone, would I need to bring the unit inside to do that, as I'm not sure if my WiFi would work in my driveway, I'm hoping this is a simple process, would a Bluetooth device be better, and what is the length range for Bluetooth to work
Sorry for these questions, I'm not at all tech savvy, so any information would be appreciated.
The direction of the fuse tap matters, but it's unclear how that determination is made. Can you clarify?
Great question. You can find that specific information at 5 minutes and 25 seconds in this video. ua-cam.com/video/4WImyAtwuF4/v-deo.html
well done video! thank you
Do both red and yellow wires tap into 12v constant?, How can you tell if they are constant 12v, it only says how many amps?
0:59
So if I don't want to use parking mode and want to be absolutely sure this will not drain any of my battery, what are my options? I don't see that viofo offered a 2 wire kit and I do not want to just turn off parking mode on the camera. Can you safely crimp the red and yellow wires into the same tap and plug into a fuse that's only on when the car is turned on?
I have the same question. I've read on a dashcam forum that it's not recommended to tie the red & yellow wires together. It might be possible to connect just the yellow (ACC) wire to switched battery and leave the red wire unconnected as red is only used for Parking Mode power.
when you turn off the ignition and it is connected to a battery in parking mode, should a red light flash on the camera? How do you know it is in parking mode?
@dial2fast can you please answer this question
I have this same question. When in parking mode should there be any red leds on?
Once you turn the car off, there should be two lights on. 1 is for the mic/audio and the other one is the recording light.
After you turn the car off about 30 seconds later that recording light should start blinking fast which means is working properly in parking mode.
can you use this with out using the red wire, like say i only wanted to wire it up with ignition on only?
Yes you should be able to so the dashcam is hardwired for ignition power only (no parking recording).
AMAZING video !! Thanks
You are the best!
Just got the A129 Plus Duo and judging from the footage, looks like the parking mode stopped at about 4/5 hours in, on parking mode. There was a mix of normal video and time lapsed footage. I'm guessing I only lasted 4/5 hours because it drained my cars battery?
Yes
Yes, maybe it reached the cut off voltage. Or maybe the settings are not properly set.
what size fuse are you using for the dashcam 3AMP or 5AMP ?
I usually use 5A or 10A fuse for the dashcam. You can use 3A or 5A as both are fine to use. The dashcam consumes less than 1A, so the 3A will work.
@@dial2fast thank you for getting back to me so quickly. i will use a 5Amp :)
very helpful. thanks. great video. one question. I missed where t I install the ground wire.
You need to connect the ground wire to a car's chassis ground bolt. Usually you will find one under the dash.
Please let me know the amperage of the fuse to be installed in the upper slot of the fuse tap for dash cams in general and wolfbox i07 in particular. Thanks in advance.
5A or 10A fuse. Either will work fine.
Thank you. I have like your page and save your video.
So the yellow one is the acc+ only turns on when the ignition is turned on to the on position? And the red wire goes to constant 12v which is always on?
Yss
Thanks for the video! What fuses you use for the hardware kit that are for the second slot protecting the hardware kit?
5A should be fine.
need help asap. I tried contacting Viofo but no answer yet. my cam is hard-wired I fixed all the settings for parking mode. it will work for a few days normally but when hot camera screen goes black and wouldn't turn back on. keep in mind the led light is on for record and mic. parking mode doesn't seem to work as well even though the camera goes into parking mode when the car turns off.
So sorry for the issue. Has the problem been solved? If not, please open a ticket on our official website to get help.
If I understand correctly, this device interprets the voltage coming from ACC (or not) and then signals the camera to go into parking mode while still providing power? I already have an always-on USB power source that I'm running this camera from - is there no way to just manually tell the camera to enter parking mode? It is receiving power when my car is off. This video is great but I'm pretty disappointed to find I'll have to spend more time and money to use one of the camera's advertised features.
Thanks for the review and the explanations :-)
thank you, this is very helpful :)
What’s the recommended setting for the parking mode I just leave it in auto detection
In which fuse did you put the red and in which the yellow?
.Thank you.
Hey there, Great video! I used this video to try and install the VIOFO A129 Pro Duo hard wire kit on a 2020 Honda Accord Sport. After the install, I could not get the camera to power on with the hard wire kit. It powered on with the cigarette lighter cable, but not this hard wire kit. I used the driver side lumbar fuse for the red wire (battery), and the ACC fuse for the yellow wire (ACC), using fuse taps. Ground was no problem, and I tried a couple spots to make sure. For the fuse taps, do I also need a second fuse in the tap? Like should both fuse tap opening be filled with a fuse? Would only having one fuse in the fuse tap prohibit the camera from powering on? Hope to hear from you soon!
Yeah you need 2 fuses haha
@@nateattinello1464 what type of fuses ?mini or micro or others?
@@ransarana8884 depends on your car. They are different.
@@nateattinello1464 Sooo, am I supposed to go buy another identical fuse, or what?
i have a 2018 compass trailhawk , not sure what size fuse.
So when you start driving, does the Viofo switch to normal mode, or do you still have to disable parking mode manually ? Thanks for the video.
Yes it switches to normal recording once you start the car.
@@dial2fast Can you easily disable parking mode so when you're parked in your garage at home overnight and dont need it or do you have to go into the menu manually each time you want it off and on?
@@Quozl You have to disable it in the menu.
@@Quozl I think there is a fast way, you can unplug USB to de-energize the dashcam whenever you park in the garage
@@Quozl I stop recording and power it off before I turn off the ignition.
How did you hide the wires...? At 3:18 and 3:41 the wires are going from the fuse socket and running outside of the dash, at 3:53 suddenly they're tucked inside, all nice and neat. How did you hide the wires running from the dashcam into the fusebox so they are no longer outside at all...???
I have another video showing you more details on running the wire into the fuse box ua-cam.com/video/fYeaW3G-QyQ/v-deo.html
Do you have to set the parking mode with the ignition on? I tried to set it with the key off (red power only), and it resets back to the off position.
I bought the VIOFO Hardwire kit with the A-139 Pro. I had a company install the camera and it's powered via the rear view mirror power ports. I had a custom cable made for the camera and my radar detector. My question is this. I can't view any parkig mode photos. If the company installed the camera properly, will the camera show the power buttons are illuminated 24/7? As is is now, when I turn the truck off, none of the lights on the camera are on.
My guess is it's not wired for parking mode recording. It's only wired for 12V ignition. So it records when you drive.
@@dial2fast You're so right. I opened up the camera box yesterday and found the Hardware kit. I guess it's not a big deal either way. Thank you for the reply.
Your videos are very informative thanx.
i have the viofo a139 3ch and also bought cellink neo 6 batterypack. So both come with hardwire kit option. So i install both or just one? kinda confused with that part. You have a video where you install both cam and batt pack? Most videos i can find are for just one or the other. I understand i can use cig lighter and bypass this whole setup but i would like to know how to do the other version of setup. thanx
The input cable of the Cellink will need to be hardwired to your fuse box. The output cable from Cellink battery to the Viofo dashcam can be premade output USB C cable that plugs straight into the dashcam, or a un-spliced output cable that you connect to a Viofo hardwire cable. As to which output cable to use depends on where you bought your Cellink. If you bought it from BlackBoxMyCar store, then it would have given you the option to choose the correct output cable to use. www.blackboxmycar.com/products/cellink-battery-neo
@@dial2fast You are a saint lol thanx. I live in Europe and i did not have an option at blackboxmycar. I bought neo 6 on european cam site. i was thinking to ...
input cable neo6 in fusebox car
outputcable to viofo dashcam with female ciglighter adapter that came in the box with neo6.
Thanx for your time and i will look at your link.
the low bit rate recording will keep recording indefinitely ? and will the battery go down
is the hardwire kit necessary to run the parking mode ?
Yes
I have a problem . We are in Saudi Arabia, the temperature during the day reaches 48 degrees outside, inside a car, it reaches 65 degrees. And also stop recording. The problem (after stopping it will not work even if the temperature drops until you start a car.)
It is correct for the camera actually when it stops recordings after exceeding its heat range, the camera will need to be in normal recording mode to recover.
great video. i am amazed that yellow is constant on every 12v car amp/stereo yet these guys decided to switch it up. ugh.
I've seen so many VDO clips to demonstrate the wiring methods. You're the best I've chosen as it's very simple and easy to follow. The fuse box of my Toyota Yaris Hatch 2014 is in the engine compartment. How can I run it through because the fuse box has a lid to completely cover it? Many thanks.
I have the same problem with my 2014 Skoda Octavia. I will let you when I come across any suggestions 👍
Thanks for this video. I took my vehicle to a place and they installed and my camera NEVER goes off. I do not have it in parking mode I turned it off. I guess I need to look at how they plugged it in.
I installed my dash camera myself and I'm also having the problem of it never turning off 😭
@@OrtzDavd I had to go through the users manual and found a 5 amp fuse that was labeled spare that worked. Now it turns off with the car but I can set motion detection when I park in a lot for an extended period of time. Good luck
Does your dash cam still hold up in the dotted shade area after few months? Are those dots raised a bit or are they totally flat?
can i use a obd to usb adapter instead? Will park mode work with that one?
@dial2fastAmazing video so far the best i have seen ..but i have a problem i have installed my car following this video and is working good the only thing which is not working or responding is the parking mode even i have turn it on by setting auto event detection parking mode but still its not working every thung else is fine the camera turns on with ignition and i have attached the red wire with acc constant fuse and yellow wire with igntion switch any idea guys how can i make it right fot auto parking mode???
You and I might be trusting this installation example too much. I noticed that the video shows the power connection going to the GPS mount. If you look at the instructions on the hardwire kit box, it clearly conflicts with what is shown in this video. The instructions show the power cable connected to the USB connection on the side of the camera. Try that and please post a comment here if that works.
@@mattdorsey2244 The problem does not come from there, I myself connected to the USB of the GPS support and the switch to parking mode when I switch off the ignition works perfectly. So I'm thinking more of a connection or configuration error.
Great video but you didn't follow the hardwire connection method that the instructions indicate. You show the power connected to the GPS mount but the instructions show the power going to the USB connection on the side of the camera. Other viewers noticed this as well and asked you to confirm parking mode works with the method you presented. @dial2fast can you address this question please?
The enclosure of the A129 is designed to have a removable GPS module. The design is actually an old design where they use to sell the GPS as an option. That's why the USB power connector on the side of the dashcam. If you install the GPS module (which the A129 comes with), then the power cable is connected to the top USB power connector. This is how the power cable needs to be connected (to the GPS antenna), and this is how this video was made and tested for parking mode.
@@dial2fast Thank you very much for the confirmation. I am in the process of installing my cameras. Your timely reply is greatly appreciated.
I have smart wire kit and the dash cam is installed... But the problem is my car's fuse box is not inside it is in engine side i have to open bonnet. And i dont knw how i will make the wires reach over there
Hi I park my car on a Busy street what is the best time lapse to conserve Space
If you want continuous recording and save space, then go with Low Bitrate recording. Keep in mind, the parking mode will shut down once it reaches the battery cutoff voltage to conserve car battery. So don't think parking mode will run for days.
Thank you I appreciate you
What is the best time lapse recording on the menu
Wicked video thanks mate, I've just installed mine and when I leave the car the recording light and mic light stay on 24/7 is this normal ? Thanks 👍🏽
The mic light is normal since you need audio just in case someone breaks in. The recording light should stay on for about 30 seconds then after that it should start blinking fast, which means that is waiting for an event to happen.
Can I use a different hardware kit??? I bought the PLOZOE one
Can you connect this to a external battery like you did with the Thinkware U1000 and the ivolt 50?
My camera disconnects a lot when I’m away from home. How will it work if I loose the wifi??
Hello is the wire kit long enough for if your battery and fuses are located in your trunk
the kit is 3m long
I hardwire it and it worked finde. But parking Mode wont switch on..
I owned a simple hardwire kit from viofo and I managed to convert it into lighter socket, this way I was able to plug two A119 cameras into one kit.
Is it possible to do the same with this one?
Would it be an issue if I use the parking mode using the power bank for mobile? I’m currently using and it works well with all the functions for the parking mode. It has been 3 hours now and the power bank seem to have not lost its power and I can see the video recording well. Suggestion appreciated.
Yes, but keep in mind that according to their Website zur Viofo- A129 uses ~3.8 Watt in parking Mode. And it depends on what type of batteriers does your Powerbank has.
How can I add on/off switch so I can choose to totally shut off camera when I don't want parking mode on at home in garage (have home security cameras so no need to run parking mode st home). I don't want to have change settings every night and back on in morning when leaving home.
We have this function(geofencing) implemented in A139 dashcam V1.6 Beta, but for other models, we can't say for sure at the moment.
what fuse do you put into the empty slot? I saw its red but you did not mention it at all.
The dash camera draws less than 1 amp. So you can put a 5A or 10A fuse. Both will work fine.
@@dial2fast Thanks for the fast reply!
Im sorry but what do you do with the GRN wire (black wire) ?
I was thinking that you can watch waht happened to the car on the app on my house but I need to be near the Camara for this to work 😢
Hi. Is there any way to use the hardware kit cable if I don't wan't to use parking mode? I just want to use the dash cam when the engine is on. Shall I merge red and yellow calbes for this?
Yes, install the hardwire kit, and don't turn on parking mode in the setup menu.
I left it on auto event detection, and nothing recorded? Is the recording sensitive?
Has the camera entered the parking mode after your car was parked? Please check if you have set the Auto Event Detection successfully. This function cannot be set with the Motion Detection at the same time. What level of sensitivity do you set?
the hard wire kit does not come with the huge "converter box you have sitting on the floor. it seems to be a very important piece that you did not mention. Can you explain that part?
It's not important or needed
On thing to note. Parking mode won't work if you power the dashcam via the GPS unit. You must plug the power from the hardwire kit directly into the unit, not the mount.
I have heard that as well. So how come in this video appears to work well? Or is it something he forget to mention???
@@peterlicsar Not sure. By everything I've read it definitely used to be a thing. Entirely possible they've done a firmware update to make it work. I power mind directly just in case
Maybe this is why parking mode immediately reverts back to off.. I loaded the new 2.1 firmware, and it still goes back to off.
do you know how to add an on/off switch box to that setup? I would like to be able to turn off the camera completely when the car is in the garage instead of turning off the park mode in options each time.
You can put an on/off switch on the constant 12v wire. Once you turn off the constant power, it will shut the dashcam off.
@@dial2fastI'm totally green in the subject. if I connect the on/off box to the constant 12v fuse socket won't the camera still turn on on the parking mode? I once saw a similar setup but it only used one fuse. does it make sense to set it up that way? are there any downsides?
Hi I heard from you that direction is important when placing fuse tape on car insurance. How to understand in which direction we need to connect
What is the second wire you used the 2 in 1
How is it called
Is the a pillar trim on the pathfinder easy to pull out? Thinking of installing one on mine. Thanks
Yes easy to pull out. Held in by couple of plastic clips.
You could just connect to doom light and acc take from rain sensor
thanks
Can i have it set to time lapse and buffered event recording