I have an 2016 F85 X5M almost 90k on it. The left signal light on the cluster is out. I have removed the cluster and dissembled it. Tested LED light on green board with 3v battery, works off the battery test. When installed on the car the light on the cluster still not working. I am at the point where i want to buy a used cluster off of ebay same model, can someone tell me what software I need and instructions on what is needed how to clear the memory from a used cluster and program to my car? Also if you could tell me the cable you are using from the laptop to car that would be great. I do have INSTA + running on a virtual machine on a laptop but i have not tried it on the x5m Thank you. Frank
I tried, but no success. My clock/date/units/service date were reset and still no digital speedometer... what could be wrong? It seems its still nicht active? Why?
I have got the software loaded from a you tube link. But when I load profiles I only have two. Manipulation and factory coding. How do I get the other profiles?
@@jarlchicknugs5750 no i didn't.... but I did manage to do it with manipulation, basically followed as this video under manipulation. my car now displays it
I think you've been watching way too many American tutorial videos. Play it back and just listen to the amount of times you said "go ahead and". Totally unnecessary. Instead of saying "You need to go ahead and press x button" just simply say "You need to press x button". The 'go ahead and' is superfluous. I hope you break the habit one day. To see what I mean, pick ANY tutorial video on UA-cam with an American doing the commentary and you'll see what I mean.
This man just saved me a lot of trouble. I have an E90 and this software doesn't have E90 chassis. Good to know E89 will work.
Sweet and easy thanks for the clarity man really apreciated !
Would love to see a video of how to turn off passenger airbag warning light, your video was so easy to follow compared to some. Thanks
Best e90 coding video on UA-cam. Hope you can do some more vids of e90 coding
Please create more coding videos for e90. Thank you
Hi,
How can I reset CIC module to the the factory default settings? with NCSE expert?
Hi, how do I get all of that profiles? I have only 2 when I click load profile..
Lovely content! Keep it up!
Thanks!
to code the mirrors are the same steps changing only the name of the module? thanks
very nice dude!!
Thanks,very clear,recommended.i need to code window driver,what ECU ,etc
thanks
i dont have any of those profiles only "default" and it doesnt seem to code it in after following instructions, any way i can get those profiles?
I have an 2016 F85 X5M almost 90k on it. The left signal light on the cluster is out. I have removed the cluster and dissembled it. Tested LED light on green board with 3v battery, works off the battery test. When installed on the car the light on the cluster still not working. I am at the point where i want to buy a used cluster off of ebay same model, can someone tell me what software I need and instructions on what is needed how to clear the memory from a used cluster and program to my car? Also if you could tell me the cable you are using from the laptop to car that would be great.
I do have INSTA + running on a virtual machine on a laptop but i have not tried it on the x5m
Thank you.
Frank
E92 m3 how to code off the edc after installing coilovers??
Hi. After i select CAS I get an error saying VIN is faulty.. and
COAPI - 2000... any idea what that means..I have impa connected with both dots.
I tried, but no success. My clock/date/units/service date were reset and still no digital speedometer... what could be wrong?
It seems its still nicht active? Why?
Im getting the same response. Did you ever find out anything?
TY
Where did you get your version of INPA, looks different to what i have
Caleb Kulujili min has “Cable connected” as oppose to “Battery” - I believe they mean the same thing, just confirms there is a connection
Hi I have a e90 320d.i got the following. Gurtstrammer fahrer.
How do I code it out.
I have got the software loaded from a you tube link. But when I load profiles I only have two. Manipulation and factory coding. How do I get the other profiles?
did you ever figure that out? im in the same boat
@@jarlchicknugs5750 no i didn't.... but I did manage to do it with manipulation, basically followed as this video under manipulation. my car now displays it
Can you tell me how I can able the AUX IN for my E90 Business Radio
did u find how to able aux ?
Thanks!
You're welcome ;)
Do you have links for the applications used?
google bimmergeek
Can you help me code my gf's car? only one thing remove clutch press to start engine.
Thanks
What cable are you using to connect the car to the pc? Thanks and nice video!
K-DCAN búscalo en amazon
where do you dowload the sofware ??
bimmergeeks
I don’t have expert v3 profile
You have to make it. Look up videos on how to create ncs expert profiles.
I think you've been watching way too many American tutorial videos. Play it back and just listen to the amount of times you said "go ahead and". Totally unnecessary. Instead of saying "You need to go ahead and press x button" just simply say "You need to press x button". The 'go ahead and' is superfluous.
I hope you break the habit one day.
To see what I mean, pick ANY tutorial video on UA-cam with an American doing the commentary and you'll see what I mean.
Hey after folowing the tutorial i have it not showing up when i cycle thru my bc ? Any idea ?