The EASIEST Setup Guide INPA and NCS EXPERT
Вставка
- Опубліковано 18 тра 2020
- This video will show you the easiest way to setup INPA, NCS-EXPERT and, WINKFP. These programs are used to diagnostic, code, and update modules on your BMW. This is a one click installation. Please use the link below to buy the CORRECT K+DCAN coding cable. Please let me know what other coding videos you would like to see!!!
SMASH that LIKE button and subscribe!
------------ONLY TWO LINKS REQUIRED FOR CODING AND DIAGNOSTICS-------------------
K +DCAN cable (Used for E series): amzn.to/3aLaw9J
Link to 20 to 16 pin if needed for your car: amzn.to/2ZCHGU4
Link to Software: mega.nz/#!kAASwa7I!AJLVnnEBwL...
__________________________________________________________________________________
Link to coding options BMW e46: drive.google.com/open?id=1roh...
CHECK MY AMAZON STORE OUT: www.amazon.com/shop/evangoyuk
Use my link for VRSPEED: www.vr-speed.com/ref/53/
LINK TO BUY CARLY BMW (Helps out the channel too): bit.ly/2DnmrL1
YT INSTAGRAM: / evangoyuk
*Using the links below will help out the channel
Link to 3in1 Shine Armor quick coat: LINK TO BUY SHINE ARMOR: shinearmor3062.grsm.io/evango...
Link to Thermostat: amzn.to/2wkMDof
Link to Expansion Tank: amzn.to/2XftE9O
Link to Fuel Pump: amzn.to/2Xha9xB
Link to Maf Sensor: amzn.to/2yJ4d6n
Link to CCV kit: amzn.to/3e0gsLP
eManual Link: shrsl.com/1cw3h-11y0-aya4
LINK TO BUY CARLY BMW: bit.ly/2DnmrL1
Check out ECS Tuning for all your Euro part needs. Use my affiliate to help the channel: bit.ly/2JqszXb
HELP SUPPORT THE CHANNEL: www.paypal.me/evangoyuk
#BMW #CODING #DIAGNOSTICS This description contains affiliate links. If you buy a product through my custom link, I will earn a small commission at no extra cost to you. This video is for entertainment purposes only. Evan Goyuk assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video. - Авто та транспорт
Linked here from your older video. Again, excellent job!!! Thanks for all the time and effort you put into this. Not only recording the video, but sharing links to EVERYTHING that is needed to get this done.
Dude thank you for this video. I went through the forums and found all of these janky ways of doing it. This is so much easier.
tried coding my headlight washers on my e90 with carly and bimmercode with no luck. followed this guide and set everything up, coded it on and now it works! thank you genius wizard
Awesome explanation thank you buddy. I work at BMW Manufacture and nobody was able to explain it this good yet also in your other videos its explained so good.
Greetings from Germany 🇩🇪
Thank you!
You sir are an absolute legend, this works a treat on windows 8.1 FYI. I've had loads of trouble getting this to work and your link to Mike's install is so simple.
I finally found someone who explains well!
Thank you very much for your information and dedicated time!
What an absolute legend !!! I am going to try to retro fit cruise control on my E87 this weekend 🙈 you have given me a massive headstart instant subscriber !! 😁👌
Looking forward to your in-depth videos on inpa and ncs expert!
Perfect timing. I've been trying to get IMPA to work all day and just came across your video and now it works. :-)
Glad to hear it worked!
Me too. 3 or 4 attempts to get it to work under XP in virtual box got me nowhere. It didn't appear exactly like the video but I managed to get it to install. Now the driver hunt begins.
Excellent work Evan, really looking forward to the future videos on inpa and ncs expert. Thank you!
Thank you Cooper!
@@EvanGoyuk the files you said to copy from download folder are not there
Really good video! Just got an '05 ZHP a few months ago and just discovered all the coding stuff you can do. Super cool stuff! Will be referencing your videos again for sure.
Thank you
Dude, Thank you for this. I managed to get this set up really easy and got coding on my e60 done pretty quick.
Finally, a no nonsense diy presentation. Subbed. keep it up!
Love the video, can you show us how to update modules using winkfp?
Thank you very much for providing a link to the software it worked perfectly for me 😁 I followed your guide as well and used Inpa to check the cable was connected, the NCS Expert to code the $540 to the Kombi and DCS, Tools 32 to recalibrate the steering angle sensor to code and retrofit cruise control on my E87 120i Msport. It works perfectly 😁👌 can't thank you enough subscribed 😉👍
Thanks man, you the best, I received my cable with a disc however it has a error while downloading, with your link everything went 👌🏽🙌we appreciate you and your efforts, may God continue to bless you bless us😇❤️
Just a quick follow-up Evan. I found the procedure to re-code the ABS module, and was able to fix/reset the DSC using your NCS Expert software. All is now good - no dash lights on, and not a fault code in sight. Factory fresh!
Again, MANY MANY thanks.
Cheers!
Which car ?
Thanks, I just purchased the cable - looking forward to "how to use" videos to make sure I'm getting the most out of the cable and software, keep it up!
Glad to hear it!
@@EvanGoyuk Okay, got the cable and software installed... I would like to adjust the CYCL_TI_BLK to driemal (3) for one of the first tests, have you had any issues with that? In looking at your spreadsheet, if it doesn't have a ECU/Module value does it assume the one above it? In this case, the ALSZ module? Looking forward to your tutorial on programming!
Broooo this is exactly what I was looking for! Subscribed! I’m going to get this cable now and download the software. All I need for now is to reset my transmission adaptations but I’m sure more ideas will come along. Thank you!
thanks bro i'm giving you your flowers 2 mins in its taken me 3 years to get this thing set up properly thanks to you
Also, IF you don't have a K+DCAN with a switch, you can unscrew the cover, and put a small piece of tinfoil between the 7&9 wires, then just put a small tabl of superglue gel to keep it there. Mine works fine now.
7 and 9 pin?
@@jankohraskotkolo789 Yes. Mines been working for quite a while now.
6:20 there aren't thoose file... I see only the setup!
same
Did you solve this with the missing files?
@@xatazch I just chose an other content and then solved other way
@@mitch6808 can you send a link
@@mitch6808what do you mean, can you elaborate please?
I can't believe how anyone would be into this stuff...but thank God you are buddy.
your the first person or place "on the web" ive come across with good information and a reliable link to download the software. Its been maddening sorting through all the BS to find a legitimite link. Thank you sir.
Hi Evan, like may of the guys below have commented, your 5 files from your download link are missing 😞 Any chance you could fix the link?
hiya did you get the 5 files in the end as i keep looking but no luck?
6:18 I’m missing those files from my download is there an updated download?
do you have answered from him?
Same Here.
I found them on another video easy
Thank you for sharing all this! I have been through so much convoluted instruction on how to setup and connect to my 2011 328i (E90) and this just seems so simple.
did you had any probs while downloading.
thanks bro...you have no idea how many times i tried to download and install a different package of the software...one time, the words were all in german. lol....thanks man.
Hi Evan, thank you very much for sharing your knowledge.
I downloaded the software (from the mega link) and there is only the setup application, all the other files are gone. where could I download them from?
thank you so much.
I have the same problem, Have you managed to find the files yet?
Same here
No todavía.
tried to download the software but the files mentioned at 6 min in video is not there. only setup is available in download.
Same :/
Any updates on this?
@@cooper6nineit’s in the other vid for ncs expert
he got the files on the other vid of ncs expert
HUUUUUGE appreciation for all your videos! You ARE the master.
A while back I replaced the ABS module in my '03 e39 with a re-build, which (of course) was coded for an auto trannie & and doesn't play well w/ my 5-spd. I don't suppose you can point me to what I change in the coding to get my DSC working again? I swear I had a link a while back, but I'll be darned if I can find it. Have everything set to go w/ the cable & your software - but there are just so, so many settings. Unfortunately I don't speak German - and I really don't want to brick my baby.
Thanks again!
You are a saint. I'm subscribing.
I havent done the install yet, but after struggling all night, im going to wipe everything and restart using this
got the same fucking problem with the same shit,will not buy from this fucker again
Can someone help me please? when I download the folder, I only get the setup for the download, the profiles dont come with it
Hey Evan, hoping you're doing okay. In this video @5:58 minutes you have 5 files listed above the setup file for Mike's Easy BMW Tool. I clicked your link only to discover the Error 404 code. Are those files essential to coding my e61? If not, I must've missed that bit of information somewhere...
legend! Thanks buddy. The profile is what i needed!
Thank you so much for a well made, clear video !
I jus download the software but is missing the files that you copy in NCSEXPER , can you upload again the software please
I know this is an older video so not sure if ill get a response but I decided to try to do this, got everything I need however, when I download the file it does not have the extra files that you mention at the 6 minute mark, any other way I can get them or could you help me out?
Did you end up getting those files ?
Finally got INPA working on my w10 laptop. Thanks!
Best video so Far Easy installation of inpa no command box not too much copying an pasting an moving files
Thank you Evan for your great videos. I need your help in programming of three options on 2004 E60.
1- My 2004 E60 (530i) rolls down intermittently all windows and sunroof and unlocks all 4 doors by itself when parked and locked. I made sure my key fob is not pressed when getting away from car. I want to disable that option so it will not roll down all windows and unlock all doors any more.
2- How to program to disable the option for AC in order not to turn on automatically when the car starts (My 2004 E60's AC turns on when I start the car - I want to disable that option)
3- How to activate Bluetooth in my car (I do not have Bluetooth option in iDrive settings).
Thanks a lot and I appreciate your help!
Speechless bro.. Man you came through for me, awesome video.
👍🏻 nice job with the google drive and responding to any of the questions over the past 3 years
You've literally got the most useful inpa/ncs expert tutorials on youtube. Does this software have R56 (mini) included? If not, do you know how to add this onto it?
The last inpa has mini r56 in it
where do i get all those extra files above the file named "setup". Downloaded the mega file but don't have the other files...
@evangyuk second this where are the linked files
Great video. I will be doing this shortly. Just picked up a 08 z4 3.0si that is in transport mode after the battery died and was replaced. I read so many people used carly to clear this issue but found out it really didn't fix it all. I don't want to pay a stealership for a 5 minute job.
I came across this video looking for answers with the previous video of aomeone else i had watched kn srtting this up. Im gwtting back into BMW after not quite a decade. I HAD a working laptop with the DIS/GT1 and INPA on it. Sold it. Figured Ill never need it. Boy was I wrong. I am so, so , so glad someone made a video like this that made this install easy. The last time I did this was back in the days of Windows XP and OS have changed a ton since then. Not being a super big computer giy but abke to learn, I wasnt able to find detailed tutorials ln how to do this install that were up to date.
Thank the Lord i found this!
I deleted all my previous work and just started kver. The only thing i had to do was install NET 3.5 framework and after that, bingo! Teated in car and we are in business.
If you were close to me in locality man, Id buy ya a cold one, or two!! 😂
Hi Evan, this is a great tutuorial however I am unable to locate the files listed at 5:59 in your video
Please let me know how to get them. Thank you
Hey man great tutorial by far the best I’ve seen yet on UA-cam!! But my main issue is I can’t seem to change the language from German to English, even when trying to go to the CFGDAT folder. Whenever I hit on my model type and then choose engine the rest is in German, however on yours it’s in English. Would you know how to convert it like yours is shown on the video?
Are you using my links?
@@EvanGoyuk Yeah I believe I did but I’m going to delete all of the files and programs and just do it over again. Would you happen to know why my Ista+ program keeps giving me this error when trying to erase my error codes or reset Valvetronic Positions? “ifh-0006 command not accepted”
You need inpa setup and working first if using a k+dcan cable
What did you do to fix this? The first time I repaired it with the install wizard which fixed my issue with not being able to connect with the car. I then deleted all the files and redownloaded everything from scratch but after I go to the engine it's in german again. The file fix steps don't work since it already says english in the file.
@@EvanGoyuk Hi, was language resolved, i installed it flawlessly first time but still got german - deleted all re-downloaded but still no luck!
Thanks bro. Cheers from New Zealand.
Evan, I did my 330's brakes this previous weekend and with having to cut out the front passenger caliper bracket with a grinder from incompetent PO's over torquing shiznit and a personal learning process, FUBAR'D the job by letting the master bleed dry. Lmao. I stumbled through this guide to where I could get INPA downloaded to a T to your instructions and dude, you are a lifesaver. Combined with the other channel vids on here and the Dcan cable you linked I'll save a trip to my local dealer/trying the gravel road pedal mashing to purge my ABS/DSC module. Invaluable $25 tool from Amazon as well as ability to realistically foolproof brake jobs on 46's from here on out. I cannot appreciate this kind of UA-cam content enough, especially in the ages of 2020! 20 yearr old BMW's are still going strong with a huge following. Absolutely using your videos for coding, always hated not being able to one touch my rear quarter glass windows to shut unlike the one touch open and you explained how to code that essentially. Subscribed. Definitely a major fan of this invaluable channel!!!!!
Thank you for the awesome comment! I appreciate it
Thing is, if you want your rear quarter window half open/closed, you can't unless you keep the option as was. But yeah I know what you mean, it's a pita to wait for the window to fully close by holding the switch.
You never went back and talked about how to install the drivers if they didn’t install correctly, and I do believe that’s what I’m stuck on. You also haven’t posted a video about how to install and setup on Windows 10, or at least I can’t find it. Also, is NCS Expert and installing the profiles REQUIRED for INPA use?
If you got the Tou Tou cable like he linked to, search FT 232R USB UART drivers. It took me to their web page. I have it but haven't installed it yet. Or if you got another brand go through that convoluted mess they call windows 10 to get to a real control panel and get the device name then search.
I don't see the reply no drivers
Installing is very simple no need to explain
He did show how to update drivers straight after he said it.
Go into device manager when you're checking/changing your port to COM1 and right click on the same port you are changing COM on, then click "update driver" in the drop down menu.
I can answer this…
You cant but the D+KCAN cable for some reason
Thank you so much! Literally saved me big time!
Good to be German (living in Down Under) so I can read the old files............anyway.....Cheers heaps mate!! Awesome video and easy to follow. Looking forward to your other stuff.
At 4:14 you mentioned that there was another way to install the drivers. Can tell me how? I need help my drivers fail to install exactly the way you did and only have COM 3 on my port device manager.
Yes install through windows update which I show also
@@EvanGoyuk At what time stamp did you show how to install drivers through the windows update?
@@joshuagarza337 did you ever find out ?
@@OmarLopez-es2mz 4:43
hey bro u are missing the setup file at drive
Yeap!
Explain please
i can’t find those 4 pfl files i hope you answer this pls 😢
I think it should still work im not sure
I miss the 4 plf files too, where can i find them?
Fantastic Video!
Thank you so much, appreciate it buddy
hey man, awesome tutorial, I was wondering if there was an update or reason why I only have the setup icon at 6:08 in the video, I don't have any of the profiles and they don't show up when I try and load the profile in ncs expert
i have the same problem.....
@@riksmits9925 Same
PFL files? Where?
I had the same question it’s actually linked in his other video “how to code your BMW using NCS expert”
@@Savanahmae thank you so much for pointing that out!
🙏😊❤️
Hey great job keeping up with your channel and answering the 3 years of questions about the drivers that ‘APPARENTLY’ are on your google drive which you never shared! I will definitely like and subscribe now that I know what a stand up guy you are! I should probably just go to your PayPal link right now!! 🤦🏻♂️
Great one again! Can you make a tutorial in the future for updating modules with Winkfp? You make these very clear to understand!
Yes I will be updating my DME soon and a video will be out!
@@EvanGoyuk awesome!
@6:17 I am not showing those file that you highlighted. I only have the setup.exe file.
The files in the beginning of the video are not there. I downloaded the software you provided and the only one that pops up is the setup.
Me too! If we could get the other 'important' files that would be great!
Without these "important" files, will the classic INPA system still work?
Same here!
Hi mate all works but I getting Vin faulty
Same here
Super helpful, thank you
Nice 1 mate. Install was easy. Many thanks.
You said you were going to show us how to get Ista, but that wasn't covered. So is there another vid, or how do we get Ista, and why is Ista important to have? Thanks.
I can’t show you how to get ista unfortunately. Email I can help you
I haven’t been able to download the driver. Is there a file I can download them manually?
same issue
Search "Driver_D_CAN_USB.rar" on google. The second link should be a site called auto-download. It redirects you to the files. To install them follow the steps shown in a video called "How to Install BMW Standard Tools (Bimmergeeks) on Windows 10" on YT. Good luck.
Dude, this is very helpfull and very easy to install. Work for me on win10 and on E90 pre lci. Thank you sou much! I am only install driver for cable already so i cancel that.
nice stuff my brother thank you
There are no PFL files in the zip to copy?!
It is in his other video that shows more in depth how to code
@@TakeaChanceFilmswhich video
@@TakeaChanceFilms which video
Any one have a title of this other video?
@@RHYNOMAN12 dot know the name just search up his videos on INPA and its one of them
Hey there legend! What a great video. Unfortunately the plf files are not included in the download anymore. Is there a reason behind this? Not necessary anymore or so? Cheers!
did you findo ut if these files are needed? it wont qork without them right?
@@TT-wz6xy the few things I tried on INPA worked so far! Don't know if everything will work, but it's definitely worth the try
man,im new to this and your video helped ALOT !! thank you !
Awesome Dude !!thabk ypou very much
did anyone's download miss out the profiles
The profile files are missing in the drive. Other than that, very useful tutorial.
He has an older video named HOW TO CODE YOUR BMW USING NCS EXPERT | WINDOWS 10 ... In the description of that video there is a google drive link to ncs profiles
@@someseriousname thank you,you really helped me.
Hi Evan, I successfully downloaded and installed all the files from your google drive and installed them successfully. TY
Awesome!!!!
@@EvanGoyuk Great Video 👍. Can you make a Video To Update DATEN files :D
?
Yes
@@EvanGoyuk thanks so much.
Definitely the easiest. Everything worked great.
Is there anyone out there who downloaded a previous version of the zip file (maybe containing the PFL files) that might be able to copy and share the PFL files?
Hey! Were you able to find them?
@@edugamer950 Searching for them too, have you found them?
Top stuff , thanks mate 😊
Hey Evan GREAT VIDEOS MAN! Thank you for the hard work. Question: Can I use this video to recode a new LCM (brand new) for an 04 e46 or should I just follow your previous vids. I've watched them all, just trying to figure out what to use before purchasing. Thanks again, man! YOU'RE A LEGEND!
Yes that is correct!
@@EvanGoyuk Great! Thanks again!
Great explanation. Thanks
Thank you man it’s work perfectly!!!!
Great video. Very well thought out and explained. My 1 and only issue really is just this. How can I install it on another drive instead of the c drive?
Hi bro i just down loaded the mike softwear and you just teach me alot it is my first lime but i see the light. so i will love to see more of your video
Great Video!
Thank you!
Finally! Thanks m8.. Keep it up
How about the remap? like making the veh poping or something like that?
That will be coming!
Hi, Can you go through the setup of WinKFP. I used your downloads but following other videos I cannot find the files to import when doing the 1st set up?
more Great videos form you on your channel !
Thank you !
Awesome! super easy
Hey mate. Great Tutorial. Have installed files as per video instruction, run NCS Expert. Loaded profile as shown but once running it shows no option for an E87 chassis. Can you advise when time permits?
you are the best brother
it works, you legend many thanks
Thanks for sharing!
Legend! Thank you
your the best bro!!!!!
perfect bro thank you!
thanks alot!