2011 Ford Edge with Magnaflow Exhaust + K&N Air Intake
Вставка
- Опубліковано 27 сер 2024
- A quick video I just threw together of the new exhaust system on my Ford Edge.
Here's a video I threw together of the sound hard acceleration in a tunnel: • 2011 Ford Edge MAGNAFL...
Intake: K&N 77-2583KS
Exhaust: Magnaflow 16871
Excellent. Not over the top. Classy and smooth
That is not mesh in the tips. Those are resonator tips. They are a double wall tip with the inner wall being perforated. They are designed to resonate at certain frequencies to effectively amplify the sound.
Cool, good to know!
Oooooh
Did you have to apply a tune for the K&N? It all sounds great.
Sorry for the delay - no I didn't need to tune it for either the intake or exhaust. it is a good idea to disconnect the battery when doing either of those, as it triggers a relearn the PCM which does all the adjustment you really need for the new gear.
I like it I want this for wife’s daily that I drive when home every time
Cool set up! What kind of performance did this add to the Edge and did you ever get a custom tune? I hear the tune really wakes it up on these motors!
I never did get a tune but probably should have. Throttle response seemed a lot quicker but it might be subjective since I enjoyed the sound so much haha.
Incidentally I just sold the car last week, but it ran great for years after these mods.
@@johnanderson2182 ah man, what did you replace it with? The Edge isn’t super fast but it gets around town pretty good!
@@bobbydabutcha I actually moved overseas (to Japan) and I'm not going to buy anything just yet. Maybe I'll get a nice JDM sportscar out here someday, who knows!
@@johnanderson2182 woah nice! Enjoy your stay!
@@bobbydabutcha thanks!
Sounds good but tint those front windows already.
Will putting this exhaust on solve that catalytic issue p0420?
🤣 that pansy-ass neighborhood would have loved my Lincoln Town Car V8, with straight pipes
Better sound stock exhaust and louder stock
did you get any coding errors after the upgrades?
Gerry Leduc nope, no codes at all. It is a good idea to disconnect the battery during the install so the PCM does a relearn after, but there were no codes and it didn't need a tune.
I have a 2013 Ford Edge limited I want to do the same with mines
I have a 2013 limited,Spectre ghost performance CAI,jet module tuned,what exact kind of magnaflow kit is this?
Nice! Tuning is next on my list whenever I can afford it. I just installed the Magnaflow #16871 catback kit. Installation was easy. Also I had done the K&N CAI kit a while back, which definitely contributes to the sound. That same kit is compatible with your 2013 if you're interested.
@@johnanderson2182 love the set up and the sound is just throaty enough. How was the MPG gain or torque?
If you go chip like I did due to costs the JET brand is one of the few that is under 300$ and is the real deal..
Thanks! Torque feels a bit better but it's hard to say if it's subjective or not. MPG is about the same. I get just enough head-turning to make it worth it regardless, so I'm happy lol. And nice! I'll definitely look into Jet then. that's a pretty good price point
@@johnanderson2182 I know that's right my fellow edge owner I ran the full LED inside kit for 15 bucks and Phillips crystal vision ultra headlights for 28$. I thought deleting my resonator first then adding the exhaust...not sure to be honest..keep up the mods buddy look forward to seeing it.
Sounds good, I see I'm pretty late for this one. I understand the intake/exhaust part for performance. Did it change your fuel economy +/- ?
Thanks! I didn't notice a discernible difference in economy. That might be because I love the exhaust sound so much that I drive it a bit more aggressively now :)
What k&n filter did you put on I have a 2011 Lincoln MKX and I wanted to find one that would fit.
I installed this one: www.knfilters.ca/cold-air-intakes/ford/edge/3.5l-v6-gas/2011
Its fairly pricey but was super easy to install
Inside with drones on speed- / highway between cruising?
It's not bad at all honestly, unless you go past 85 mph or so. You hear it nicely when accelerating but it calms right down at cruising speeds.
I just picked up a 2011 Edge the other day and I'm thinking this needs to be my first mod. How is the drone at highway speeds?
Mine's perfectly fine until about 120 kph (75 mph). Between 120-130 the K&N intake starts resonating and is a little annoying, but with some music going I barely notice (and you can still talk over it just fine). If you do the exhaust only you should be fine though!
Awesome! Coming from a GTI with a 3" turbo back that was dead quiet with the cruise set, yet loud enough to not be overbearing when you stepped on it, I definitely want the same from my Edge. It's good to know that it doesn't get too obnoxious because it sounds great from your video.
This will definitely get you a similar effect. Thanks, and I hope yours works out great as well!
Just to be clear, you said in another comment this was MF Part # 16871 correct? Their website doesn't show this as being compatible for the 2011 models with the 3.5L. Did you have to do any custom fabricating to make this fit?
Yep, 16871 is what I ordered. I just dug up the invoice (from a place called TDot Performance in Canada) and confirmed. I'm not sure why Magnaflow doesn't show it working for 2011 now - the 2011 year was definitely listed at the time (and I did a ton of research into it because theirs was the only kit at the time that worked with both FWD and AWD Edges). Mine is a 2011 Limited AWD 3.5L, and I remember that the Flowmaster kit only worked with FWD's because of the rear sway bar placement on the AWD's. The only issue I ran into was that the end connecting to the original pipe on the cat was pretty tight, but I used a cheap pipe expander bit (which I got for like $20 locally) to widen it a bit, then everything went on fine. I'm sure it would have worked without that tool but it made it a lot easier. Otherwise, I didn't have to do anything custom.
Anyways, I'd give Magnaflow a call and confirm with them. My understanding is that there are virtually no changes between the 2011-2014 model years that should affect exhaust fitment, but hopefully they can clear it up!
Did you have a increase in HP after replacing the exhaust?
Honestly I can't say for sure since I didn't dyno it or anything. I want to say there's a tiny bit more power, but it could be all in my head since I love the sound so much.
The cold air intake alone claims like 10 or 15 horsepower increase, theoretically this should put that car up to about 300 horses
@@noahkidd4674 True. I'm always a bit skeptical of those claims, but who knows. I wish I had a buddy with a dyno locally.
Based on the number of slightly sporty cars (think 80's/90's mustangs, that sort of thing, not real performance cars) that I've outrun, I'm sure I've gained a few HP though.
sounds good and subtle. adding a muffler to it?
Yeah I love how it doesn't sound like much till you really open it up. The Magnaflow kit does have both a resonator and muffler on it already, and I think I'll leave it as is. It's at the just the right volume level for most driving situations (it's only on the highway around like 75-80 mph that it gets a bit annoyingly loud).
John Anderson that's unfortunate because I was looking to get this and most free ways and highways is 75mph to 80mph. sounds great with the intake also. I have the same k&n with some hr Springs and 265 super sport tires. the exhaust is probably the last thing I do to this car. it's just so heavy
Gotcha. Around where I live in Canada the speed limits usually 110 kph (70 mph) so unless I'm speeding it's fine. Cool call on the springs - I might need to look into that as well. Are they super expensive? Otherwise I'm mostly done with mods too, except maybe some tuning when I can afford to.
John Anderson the springs I got lowered the car well. just had a vision for it. once I got the new tires, the fitment was perfect. I got mine for 240. I'm sure they're the same price but you might even find cheaper ones. I was originally gonna go with eibach but I just wanted something American made lol
Sweet. I'll definitely look into that. Thanks for the info!
Cost?
About $900 Canadian
What wheels are those on your Edge?
American Racing Mainline's with the gloss black finish. I love em!
www.americanracing.com/product/wheels/ar893-mainline/?attribute_pa_finish=gloss-black-machined
What motor is in that??
This is the 3.5L V6 Duratec.
How hard is the install?
Not hard at all. It was a few years ago but I think it only took two hours or so. I only needed an impact plus a pipe expander tool.
Did you throw any check engine lights?
Nope. It was perfectly plug and play.
I miss the eighties V8 Trans Am sound. Nowadays everyone just tries to come close to mimicking that with these weird little lawn mower engines
Yeah that was borderline gay The only time you could have actually made it cool was when you drove past your house you let off the gas completely, then you did the lame .Look at me (I'm the back in guy).
I guess, if you're into that sort of thing, fill your boots 😄
Engine? 🤔
3.5L V6. Naturally aspirated (the Duratec/Cyclone engine)
2.0l?
3.5L V6 actually. Naturally aspirated (the Duratec/Cyclone engine)
What exactly did you do to the exhaust? How much did you pay?
I put on a Magnaflow cat back kit. Part# 16871 to be exact. Plus some of the sound comes from the K&N air intake. Roughly $800 for the exhaust, and $300 for the intake.
I wish this car came in diesel
Some of the newer Edges did come in diesel in Europe I believe. And stick shift too.
Suburban! Trailer park boys.,Laughing Out Loud.not lol,but for REAL.
I have the 2009 Ford Edge limited awd
BWS 7742
Nope. Good try though
why are we trying to make our edges louder?Buy a performance car
Because we can! And why not.
Sounds like a import
Sounds like a Honda.nice
If you say so!
Sounds like amazing! Nothing like a shitbox!