Hey thanks for the comment. Which item are you taking off? The front glass is easy, take off like you put on. The rear panel can be a little tougher, but pushing out to help lift the clips from the bottom once you have rotated the handles on both sides. The roof can be quite snug, pulling on the corners on the rear can help loosen and work it up and off the machine. Once you get the back popped out should come right off. Hope this gives some direction. Not visual but something. Thanks again!
@@BeverageTractor Alright that sounds good. Taking off the rear panel. So pushing out won’t break it? I’d hate to break the thing. Seems really snug. I guess the clips are pretty stout too and won’t break?
@@smithbros1661 yeah it is very snug! Do you have poly or glass? It helps to have someone push in towards the machine to twist the clips to unlock it. Then especially if poly you have push in the center of it to help pop the bottoms out. If it’s glass it’s snug and won’t be able to push in the center like poly.
I love how they explain but don't show how to get the back part of the roof to clip in. I can't see doing this with a pry bar unless you want to pinch your fingers off.
Thanks for the comment. There are a few ways we do it. Some of us do it differently. You can use 2 people and basically work it down and push hard on each corner, putting plenty of weight, to get to snap. another way and most common for us is by sitting on each corner to apply the weight to snap them down. Another way is getting a towel or something for cushion and a soft hammer to hit it down. The first and second work best. Thanks. It can be a finger crusher for sure if not careful, they are quite snug when on.
Hey thanks! Note that these can fluctuate due to year and type but these were the pieces that we point on. Roof: ranger.polaris.com/en-us/shop/accessories/roofs/2882911/ Windshield: ranger.polaris.com/en-us/shop/accessories/windshields/2883278/ Rear Panel: ranger.polaris.com/en-us/shop/accessories/rear-panels/lock-and-ride-rear-panel/?pid=2883774 Thanks.
Do you take it off the same way? Are there any tricks to getting it off easier?
Hey thanks for the comment. Which item are you taking off? The front glass is easy, take off like you put on. The rear panel can be a little tougher, but pushing out to help lift the clips from the bottom once you have rotated the handles on both sides. The roof can be quite snug, pulling on the corners on the rear can help loosen and work it up and off the machine. Once you get the back popped out should come right off. Hope this gives some direction. Not visual but something. Thanks again!
@@BeverageTractor Alright that sounds good. Taking off the rear panel. So pushing out won’t break it? I’d hate to break the thing. Seems really snug. I guess the clips are pretty stout too and won’t break?
@@smithbros1661 yeah it is very snug! Do you have poly or glass? It helps to have someone push in towards the machine to twist the clips to unlock it. Then especially if poly you have push in the center of it to help pop the bottoms out. If it’s glass it’s snug and won’t be able to push in the center like poly.
@@BeverageTractor It’s poly. Thank you so much for the reply! I appreciate your help!
@@smithbros1661 no problem at all. Hope it does help! Thanks for watching!
Do you not screw the roof down? Having a really hard time.
Normally no. The roof is very secure without the hardware.
I love how they explain but don't show how to get the back part of the roof to clip in. I can't see doing this with a pry bar unless you want to pinch your fingers off.
Thanks for the comment. There are a few ways we do it. Some of us do it differently. You can use 2 people and basically work it down and push hard on each corner, putting plenty of weight, to get to snap. another way and most common for us is by sitting on each corner to apply the weight to snap them down. Another way is getting a towel or something for cushion and a soft hammer to hit it down. The first and second work best. Thanks. It can be a finger crusher for sure if not careful, they are quite snug when on.
I agree. Poorly lit. Poorly photographed. .
link to buy roof and windshield
Hey thanks! Note that these can fluctuate due to year and type but these were the pieces that we point on.
Roof: ranger.polaris.com/en-us/shop/accessories/roofs/2882911/
Windshield: ranger.polaris.com/en-us/shop/accessories/windshields/2883278/
Rear Panel: ranger.polaris.com/en-us/shop/accessories/rear-panels/lock-and-ride-rear-panel/?pid=2883774
Thanks.
The other guy looks like Freddy rouch
Interesting