Thanks! I was split between the Benks Infinity and infinity pro stands for the iPad Pro 12.9 inch, and this helped a lot. I’m using it for sidecar with my MacBook Pro 14 inch, so the weakness of the stand at low angles can definitely be a dealbreaker
Can you post a short video of using it to sketch in low, angled positions, particularly with the bottom edge of the iPad resting on the table? I would love to see if the added support of the table would stabilize the iPad in spite of the saggy hinge. Other videos of the older, non-pro stand (and the Lululook version of it) show those hinges are so stiff as to be hard to adjust for strong-looking adults, and I am worried that my kid might struggle with that.
If you have the hinge at low angle, you will have to support it with your other hand. With Lululook foldable stand, you don't have to support with other hand. The hinge may be stiff but it's not that stiff. Maybe as stiff as the tightest laptop hinge.
Hi! Between this, the Lululook v2 stand, and the v1 Benks, which would you say is best in terms of magnet strength, hinge strength, durability and ergonomics? Thank you and subscribed!
Lululook and Benks have very strong magnets. If you don't need the stand to fold, you can just go with the non-foldable one (Lululook) as it is cheaper. Or if you need foldable, the design shown in the video is good as the hinge is stiff and base is stable. See all the tablet stands I've reviewed here www.parkablogs.com/tags/tablet-stand
Does this stand wobble if you write with the Apple Pencil in the high position? And is it good and stable for drawing at an angle if you lower it to the table? I’m looking for a stand that is stable enough for this two things
The hinge is not strong when the angle is low. You'll want this instead which has a much stronger hinge and can be used at all angles. www.parkablogs.com/content/review-lululook-foldable-ipad-pro-stand
It's too bad that Benks doesn't have any type of customer service Had received a damaged Benks stand and sent them numerous emails to get this corrected and replaced and still after 1 month no response from them so I now have disputed the charge with cc company and they will not get their stand back nor the payment I made since they didnt reply to my many emails It is terrible customer service I do not suggest that you buy anything from Benks because of this alone
Just make sure to get the correct size. The 12.9 and 11 are not interchangeable. If you want something that definitely works, go with their rotating stand which I actually prefer because you can use it with any tablet. ua-cam.com/video/ZZym0tucwKg/v-deo.html
No. The magnet positions for 11 and 12.9 are different. If you want to use the same stand, you should get this one www.lululook.com/products/tablet-stand-holder?rfsn=6999625.5cb85f
Do you have a screw or something to adjust? because my intention is to use it at less than 45% and that it does not support the weight is something that goes against my desire to buy it
hi there, thanks for this awesome video. Have you also managed to try the 360 rotational foldable by lululook? i'm wondering how does it compare to benks. thanks.
There are such accessories from Pitaka, but are way more expensive. www.parkablogs.com/content/high-speed-wireless-ipad-pro-charging-pitaka-magez-case-pro
Thanks! I was split between the Benks Infinity and infinity pro stands for the iPad Pro 12.9 inch, and this helped a lot. I’m using it for sidecar with my MacBook Pro 14 inch, so the weakness of the stand at low angles can definitely be a dealbreaker
Such a simple and concise review! Thanks for this.
I love benks they created my oem like king adjustable iPad stand
Can you post a short video of using it to sketch in low, angled positions, particularly with the bottom edge of the iPad resting on the table? I would love to see if the added support of the table would stabilize the iPad in spite of the saggy hinge. Other videos of the older, non-pro stand (and the Lululook version of it) show those hinges are so stiff as to be hard to adjust for strong-looking adults, and I am worried that my kid might struggle with that.
If you have the hinge at low angle, you will have to support it with your other hand. With Lululook foldable stand, you don't have to support with other hand. The hinge may be stiff but it's not that stiff. Maybe as stiff as the tightest laptop hinge.
Hi! Between this, the Lululook v2 stand, and the v1 Benks, which would you say is best in terms of magnet strength, hinge strength, durability and ergonomics? Thank you and subscribed!
Lululook and Benks have very strong magnets. If you don't need the stand to fold, you can just go with the non-foldable one (Lululook) as it is cheaper. Or if you need foldable, the design shown in the video is good as the hinge is stiff and base is stable.
See all the tablet stands I've reviewed here
www.parkablogs.com/tags/tablet-stand
Thank you!
Do those work for any iPad or only the one in the specs ? Like if I order one for the iPad Air then I won’t be able to use it with my mini too ?
You must get the correct model. Difficult iPads have different magnet locations. Lululook brand has more sizes
Thank you sir
Does this stand wobble if you write with the Apple Pencil in the high position? And is it good and stable for drawing at an angle if you lower it to the table? I’m looking for a stand that is stable enough for this two things
The hinge is not strong when the angle is low. You'll want this instead which has a much stronger hinge and can be used at all angles. www.parkablogs.com/content/review-lululook-foldable-ipad-pro-stand
Will it works with ipad that have case?
It's too bad that Benks doesn't have any type of customer service Had received a damaged Benks stand and sent them numerous emails to get this corrected and replaced and still after 1 month no response from them so I now have disputed the charge with cc company and they will not get their stand back nor the payment I made since they didnt reply to my many emails It is terrible customer service I do not suggest that you buy anything from Benks because of this alone
notes stated for ipad pro but should technically support any other ipads that can connect with magnetic correct?
Just make sure to get the correct size. The 12.9 and 11 are not interchangeable. If you want something that definitely works, go with their rotating stand which I actually prefer because you can use it with any tablet. ua-cam.com/video/ZZym0tucwKg/v-deo.html
On mine hinges are so tight I have to use 2 hands to rotate the ipad but it stays solid at whatever position I set it to
Is IT works for iPad 10 generation?
Can I Use the 12,9 size stand with the 12,9 iPad Pro and with the 11 iPad Pro at the same time ?
No. The magnet positions for 11 and 12.9 are different. If you want to use the same stand, you should get this one www.lululook.com/products/tablet-stand-holder?rfsn=6999625.5cb85f
If I have a skin on iPad, will it still stick to this stand ? Need to know before purchasing.
Skin as in sticker? It should work. Case, no.
Do you have a screw or something to adjust? because my intention is to use it at less than 45% and that it does not support the weight is something that goes against my desire to buy it
There is nowhere on the stand to use the screw
@@teohontech7141 i made a bad purchase today 🤦🏻♂️
hi there, thanks for this awesome video. Have you also managed to try the 360 rotational foldable by lululook? i'm wondering how does it compare to benks. thanks.
It should have similar performance since it looks identical
Thanks. Do you have any preference? Both of them are almost the same price on black Friday today
@@eugenesiew541 I prefer the lululook one with the flat stand. I prefer the hinge to be stiffer
@@teohontech7141 thanks.
I think u got the 11” stand for the 12.9” stand that’s why iwobbkes
Can it be used with portable monitors?
Yes
Would be awesome if wireless charging could be intergrated
There are such accessories from Pitaka, but are way more expensive.
www.parkablogs.com/content/high-speed-wireless-ipad-pro-charging-pitaka-magez-case-pro
Thanks for the information
Need a Samsung 1
it not good specially with that fault hinge design , there are many other options available now.
There are indeed many options. Most are rebrands. This may appear as a rebrand from other companies in the future. 😂
А почему нет зарядки через Smart Connector?!😟
It's supposed to be a simple design