@@fincantbuildyou should try and use that piece from the series 26 cmf, i don’t know what the figure is called but it’s like white, black, and blue, and the best part is you can just scan the boxes to find out which one has the fig
Bruh It's Just Toys We Can Make Some Custom Lego Using Those Fr Like Not Gonna Lie If You You Don't Have That Part Just 3D Print 3D Printing Can Make More Legos Like WHAT We Don't even Need Money To Buy More Legos At That Lego Shop We Just Need Printing
Tbh I just want a secure way to place the head onto the body without it just falling off. Cause the model right now just had the head placed on top no connection ☹️ great design though
It's coming soon! I'm currently away so just bought a few bits to finish off the helmet, but will be adding it to the power armor and adding a way to connect heads soon
Ngl when i went and made my own i used savage oppress's chest armor and a shadow trooper helmet with ultron drone body and shadow trooper legs, the space marine chest armor from lego cmf works too!
I really advice using a spray paint rather than brush. You'll get a really clean finish and with a sprayed gloss varnish to finish you'll get a perfect plastic look
I actually like the AIM operator rebreather collar mixed with the wave power miner helmet with visor combo for a modless version. Dark tropper helmets also work great for an advanced power armor helmet for those looking to make a minifig scale frank hrodigan
Ive always thought with the old OG clone helmets you could add some thin plastic cut outs on the inside with glue so the visor would be covered but you can add any minifigure head you want
I think the stud is a little big on the helmet, maybe look into using a coin piece or something smaller to save the detail on the clone trooper helmet.
Honestly... if u just shaved down those end nubs on the original helmet, and painted the hose parts black, it'd look really good, no extra pieces required.
Definitely is better than the other two maybe you could 3-D print out some stuff if you have a 3-D printer for the helmet like some lights and stuff that you can glue on and paint and maybe I know this isn’t necessary put in a visor in the helmet itself so just in case you want to use a normal head, you can put the helmet on anyways and it will look good I mean, even though if the 3-D printed pieces aren’t like actual Lego pieces it’s your own type of power armour so it’s your choice
the stud is a little large and sets off the proportions of the helmet, that's my only gripe, if a smaller alternative suits the stud's place that would be an awesome helmet.
Might wanna try taking of the "nipple/bobble" part where it says lego with sandpaper.. And than scratch some lines in that place and color in those markings
Make sure to use a respirator when sanding or cutting plastic. As someone who collects warhammer minis and assembles them the air can get insanely dusty after a few hours of assembling minis.
It looks a lot like a NCR veteran ranger helmet. Combining thay with a solid red headpiece could be very cool
Bro my thoughts exactly
Yeah it really does, got some more helmets ordered so will definitely have to give it a go
Yeah just a helmet on top with a coat will make a perfect fit
@@fincantbuildyou should try and use that piece from the series 26 cmf, i don’t know what the figure is called but it’s like white, black, and blue, and the best part is you can just scan the boxes to find out which one has the fig
Did i hear ncr?
Bro commiting LEGO war crimes 💀💀💀
Ik it sucks seeing people do this but yk at the end of the day its his stuff ig
It's just Legos you can cut it if you want stop crying
@@masonfisher1883it looks cool, and he’s not reselling so if he likes it stfu baby
@@DREDD_BOTits a Lego war crime. Your probably just an iPad kid who knows nothing about Legos. Get the crayons out of ur nose
Bruh It's Just Toys We Can Make Some Custom Lego Using Those Fr Like Not Gonna Lie If You You Don't Have That Part Just 3D Print 3D Printing Can Make More Legos Like WHAT We Don't even Need Money To Buy More Legos At That Lego Shop We Just Need Printing
it looks awesome but it still hurts lol
For sure, probably my favorite clone helmet too
Sometimes a bit of pain is worth the effort.
I know others have said this, but it does look like the NCR helmet the courier can wear in fallout nv
Use a fire hose end piece that you have cut off and glued on for the flashlight part and it would be slightly better
We need to bump this comment up so he sees it
I'll definitely be adding a flashlight and sight soon, think it'll help a lot
Yes it is better than the two other helmets
Glad you think so!
The sacrifice was worth it...
Glad you think so, it will not be forgotten
@@fincantbuild o7
Why not use a broke or messed up print one
@@slytester1723Bro said he wanted to only use official lego pieces for the build
That’s a really cool looking custom helmet! Well done!:)
10/ 10 the stud being the front makes it feel more lego while at the same time really fitting the in game helmet
Thats dope. I would use fake lego helmet but each to there own😅
Thanks, and that's a good point actually, there must be knockoffs available
@@fincantbuild it maybe hard to get a og helmet but have a look at temu maybe
@@HoloBit. Yeah there's straight up packs of 10 for cheap on aliexpress, they should arrive in 7 days lol
@@fincantbuild noicces
@@fincantbuildYou probably should've done that first before destroying something that's no longer made.
I may be a LEGO purist but honestly, the end result looks way too good for me to get upset at you for destroying a vintage LEGO piece.
Love it
Thanks!
This looks like the courier Helmet, could you make the courier from fallout using that same piece again?
I did think that too, just ordered a few fake helmet alternatives, will definitely give it a go!
The power armor looks amazing. But it hurts to see you chop up that clone helmet😭
Definitely better than the first two options. It’s not bad, but we are definitely advancing with each new edition. Good work!
Nice
It could use a couple tiny paint apps but it is really good
I'm happy I'm not the only one who knows of input bricks he is a GOAT when it comes to customizing
Adding another stud at the back to add a back light might be a good addition
Me personally I think it was a good idea to use the old 2007 Clone trooper helmet it does look like a t-60 power armor helmet
Thanks, I think it's the closest you can get to the eye shape, just gets expensive if you want to make a few
@@fincantbuild understandable but still you want to try make it accurate
Tbh I just want a secure way to place the head onto the body without it just falling off. Cause the model right now just had the head placed on top no connection ☹️ great design though
It's coming soon! I'm currently away so just bought a few bits to finish off the helmet, but will be adding it to the power armor and adding a way to connect heads soon
Out of the two made exclusively with no modded pieces I prefer the first, but the new custom helmet is pretty good.
I cried watching you cut out that helmet
Adding a layer of spray primer would be a good idea in future, gives the paint a better surface to adhere to, meaning less layers are needed
I know it will never happen, but it would be cool if lego did official fallout sets
Yay ive been waiting for this
Hope it doesn't disappoint!
You're so underrated, keep up the great content!
You could also use the ice plant explorer helmet from the newest minifigure series
That is also a really nice helmet, and the mouth tubes would work well
Palpatine: execute order 66
Cody: it will be done my lord. *fucking dies*
Its MUCH better than the others
Ngl when i went and made my own i used savage oppress's chest armor and a shadow trooper helmet with ultron drone body and shadow trooper legs, the space marine chest armor from lego cmf works too!
Should use the galaxy squad green robot head piece next
I really advice using a spray paint rather than brush. You'll get a really clean finish and with a sprayed gloss varnish to finish you'll get a perfect plastic look
I actually like the AIM operator rebreather collar mixed with the wave power miner helmet with visor combo for a modless version. Dark tropper helmets also work great for an advanced power armor helmet for those looking to make a minifig scale frank hrodigan
Knowing that he made the helmet out of that, I don’t know what to feel except anger
Ive always thought with the old OG clone helmets you could add some thin plastic cut outs on the inside with glue so the visor would be covered but you can add any minifigure head you want
Highly advise using an airbrush or rattle can over the brush, a lot of detail was lost with the brush as the coats are a bit too thick
It does look good but I couldn’t bring myself to cut pieces off the clone helmet
Looked better where it had only minor modifications
I think the stud is a little big on the helmet, maybe look into using a coin piece or something smaller to save the detail on the clone trooper helmet.
Can you build Leon Kennedy as a figure? Please 🙏
Lego just released a hair piece which would be perfect, definitely added to the list
@@fincantbuild Thanks man!
You should add the lights on the helmet to make it look closer to the helmet
Honestly... if u just shaved down those end nubs on the original helmet, and painted the hose parts black, it'd look really good, no extra pieces required.
I would be mad, but its just so beautiful
It’s your lego you can do whatever you want with it
Hey dude, can you make a super mutant out of Lego fallout 4 I’m a really huge fan of your channel
Tbf, i feel like combinging the mouthpiece of the scuba helmet thing in the first design with the modified helmet would probably work really well.
Although this hurts me to watch the end result looks beautiful
If you want a more accurate shape, use the Ninjago scuba gear mouth accessory cut and painted. Comes in black by default.
Definitely is better than the other two maybe you could 3-D print out some stuff if you have a 3-D printer for the helmet like some lights and stuff that you can glue on and paint and maybe I know this isn’t necessary put in a visor in the helmet itself so just in case you want to use a normal head, you can put the helmet on anyways and it will look good
I mean, even though if the 3-D printed pieces aren’t like actual Lego pieces it’s your own type of power armour so it’s your choice
the stud is a little large and sets off the proportions of the helmet, that's my only gripe, if a smaller alternative suits the stud's place that would be an awesome helmet.
Just my opinion but I think the first one is more accurate in general and you don’t have to destroy peices
I think with a few more modifications I can get my new one more accurate, nice to have a "purist" alternative though
@@fincantbuild yeah
@@fincantbuildjust saw the new video that is so sick dude!
Might wanna try taking of the "nipple/bobble" part where it says lego with sandpaper..
And than scratch some lines in that place and color in those markings
I would say that a perfect x01 helmet would be that of general zod from some of the 2013 superman man of steel sets.
You just commited various lego war crimes 😭
Johnny cash is a great singer I love his music
That is a lego war crime
should’ve used a helmet with holes for a range finder
I love it
Now, turn it into a visor, make the pauldrons and chest green, then you git the T-51!
Looks like NCR vet helm with a respirator
PERFECT OMG
Very epic
I was gonna say you need to make a new helmet, but this looks absolutely beautiful
Make sure to use a respirator when sanding or cutting plastic. As someone who collects warhammer minis and assembles them the air can get insanely dusty after a few hours of assembling minis.
Nice work you should make the NCR Veteran Ranger next
The first one the one with the googles are pretty good if you don’t have that helmet
It's definitely a good option if you don't feel like cutting and painting
The. Most underrated Lego clone helm
Him: some people might get angry.
Me: *Destroys Computer*, *cries*, *Destroys Desk*, *cries*, *Destroys House*
Cutting down the fin made the Clone Trooper helmet look more like a Stormtrooper helmet
..wait
Rose coming in lego war crimes😅 is the best line i ever saw
Crocodile clips will actually be better for painting, and consider sprays, you can spray the parts separately.
Me watching this was like that one scene from interstellar?
Lego should partner with fallout
Without the mouth pieces it looks like a ncr helmet
Bro is Lego carving
I mean, I would judge if you would put it on the figure but right now I can’t really judge
It wolf be pretty cool if you made ED-E
It's been on the list for a while, definitely need to give it a go soon
It looks so good. But hurt me so much inside
I used a tie pilot helmet to make the helmet for my version of the T-60 armor (i had 2 of them)
It looks good, but watching an OG clone helmet get cut up stings a bit. 😂
Please can you do a full length totoryal for it
Now make a space marine, please
Modify a mandalorian helmet for the t-51
Best one
You should use the scuba diving helmet from set 30370
I’m 3d printing a life sized t35 for my dad he has over 1500 hours in fallout 4
Kitbash, nice 😎👍
You should try the dark trooper helmet
I actually did this as a kid
Anyone notice that this is Robert House’s comment?
I about died after seeing what you did
I think the first method was better but overall pretty good
It's a good "purist" option for sure
Deathclaw(FO4 though)
It needs the flashlights
YES SO COOL
You should do doom fuy
I’m crying rn, please end my suffering
i just understood why they are called minutemen
The stud part looks strangely big. It’s fine I guess.