Dell 3542 Mai 7beep ke bahot video dekhe hai but muje lagta hai Sabse different hoga aur helpful bhi thx agai again apke liye Chhota pad Gaya ye hai words ...
Since u have pltrst#,then check LPC CLK (resistors in put And output they might be faulty) #LPC FRAME (CPU RESPONDING).ALSO CHECK INPUT AND OUTPUT OF RESISTORS FOR BOTH COMUNICATION OF PCH AND SIO #BIOS COMMUNICATION PROPER.(Check pins DI,DO,CLK,HOLD,WP there input and output resistors ) #DRAMRST(Is it selecting ram bios module chip #DDR SDA,DDRSCLK (CPU PROPER COMMUNICATION WITH RAM SLOT ) #LPC(0,3)DATA LINES.(PCH AND SIO COMMUNICATION PINS.)Check input and output resistors for all(lpc0,3) pins to know if there is proper communication . PLEASE SIR I REALLY APRECIATE YOUR GREAT KNOWLEDGE YOU SHARE WITH US.WHICH HAS REALLY HELPED US TO GROW IN REPAIRING FIELD.KEEP IT UP SIR THANKS
Yes you have mentioned maximum possible cause for this problem. Great work. We are doing our best to provide knowledge via free as well as paid videos. Keep supporting and Sharing our videos 😊
SIR THANK YOU ONCE AGAIN FOR SHARING THE REASONS WHY 7 BEEP OCCURS, I RECEIVED LA-9981P MB WITH SIMILAR PROBLEMS, WAS UNABLE TO DIAGNOSIS THE PROBLEM, AFTER I SAW YOUR EXPLAINATION I GOT BACK TO WORK ON THE MOTHERBOARD AND FOUND I/O DRY SOLDER,, JUST FIXED IT AND DISPLAY CAME.. THANK YOU ONCE AGAIN , MAY ALLAH BLESS YOU AND YOU ENTIRE TEAM./.
may be LPC and PCI track is damage. Sir lenovo T430 men IO (THINK ENGINE) ki pin num 76 sy 25 volt aaty hen battery charging k 1 mofet k gate ko enable karny liye, agar yeh 25 volt IO nahi nikal rahi to mosfet drain to source jumper kar sakty hen bajye IO replace, koi problem to nahi. I have done this and laptop charging properly.
Bios communication error with pch can also be a problem .so resistance on BIOS pins check.(clk,DO,DI) both in put and output of resistors which can block communication for both bios,pch.
Sir, My Dell 5558 laptop beep for 7 times and if I retry back to back laptop gives same beep without any display but after few (4-5 ) hours if I try again it boot up successfully without beep sound. Any advice to fix it.
Mera ek laptop hai dell 3542 auto shutdown ho jata hai ek bar repair karya to kuc mahine chale phir wahi problem ati hai aur phir on bhi ho jata hai aur khat se karke band ho jati hai kam karte samy kya kare bataiye sir 2 jagh dikha chuka hu koi bhi permanent solution nahi de raha hai please reply sir
Dell 3542 Mai 7beep ke bahot video dekhe hai but muje lagta hai Sabse different hoga aur helpful bhi thx agai again apke liye Chhota pad Gaya ye hai words ...
Let's see the concept in the next part of the video then you can get the point 👍
Since u have pltrst#,then check LPC CLK (resistors in put And output they might be faulty)
#LPC FRAME (CPU RESPONDING).ALSO CHECK INPUT AND OUTPUT OF RESISTORS FOR BOTH COMUNICATION OF PCH AND SIO
#BIOS COMMUNICATION PROPER.(Check pins DI,DO,CLK,HOLD,WP there input and output resistors )
#DRAMRST(Is it selecting ram bios module chip
#DDR SDA,DDRSCLK (CPU PROPER COMMUNICATION WITH RAM SLOT )
#LPC(0,3)DATA LINES.(PCH AND SIO COMMUNICATION PINS.)Check input and output resistors for all(lpc0,3) pins to know if there is proper communication .
PLEASE SIR I REALLY APRECIATE YOUR GREAT KNOWLEDGE YOU SHARE WITH US.WHICH HAS REALLY HELPED US TO GROW IN REPAIRING FIELD.KEEP IT UP SIR
THANKS
Yes you have mentioned maximum possible cause for this problem. Great work. We are doing our best to provide knowledge via free as well as paid videos. Keep supporting and Sharing our videos 😊
NASHIR SIR IS THE BEST TEACHER IN INDIA OF LAPTOP REPAIR TRAINING.
I'M alredy joine training institute.
Thanks brother 👍. Really appreciate your true feedback and feeling proud to have you as our student 😌
SIR THANK YOU ONCE AGAIN FOR SHARING THE REASONS WHY 7 BEEP OCCURS, I RECEIVED LA-9981P MB WITH SIMILAR PROBLEMS, WAS UNABLE TO DIAGNOSIS THE PROBLEM, AFTER I SAW YOUR EXPLAINATION I GOT BACK TO WORK ON THE MOTHERBOARD AND FOUND I/O DRY SOLDER,, JUST FIXED IT AND DISPLAY CAME.. THANK YOU ONCE AGAIN , MAY ALLAH BLESS YOU AND YOU ENTIRE TEAM./.
Great work bro 😁. We really feel proud and motivated that we are adding value to our UA-cam audience ❤️. Keep supporting and sharing our videos.
But please, what do you mean by I/O dry solder??
@diamonddia5250 it's not solder properly.
@@laptex1377 okay you mean to solder the sio properly???
Yes correct
You can also joine this institute.
my feedback ratting 10 of 10 star.
thank you so much NASIR SIR.
can you tell us what is the problem in m.baord?
Thanks brother 👍. Really appreciate your true feedback. And we are proud to have you as our student.😊
Thanks NASIR for another educative lesson
Always welcome bro and ready to help. Keep supporting and Sharing our videos 😊
I learn lots of things to see ur videos
Thanks brother. Keep supporting and Sharing our videos 😊
its very good diagnosic... waiting for next video... pls upload as early as possible
Thanks. Will upload on Saturday 👍
This is Good teaching sir, Thank you so much
Always welcome ☺️. Keep supporting and Sharing our videos ❤️
I love the way you teach, thanks
Thanks brother 👍. Keep supporting and Sharing our videos 😊
thanks sir i solve this problem with the hep of your intro alhumdullillah sir g
Great work bro... Keep supporting and improving your knowledge.👏👏
I must join your courses
Sure bro.
WhatsApp
+919031240767
For details
Your presentation is awesome.. Keep going sir.. 🥰
Thanks brother 👍. Appreciate your support. keep supporting and Sharing our videos 😊
Very helpful video sir
Thanks brother 👍. Keep supporting and Sharing our videos 😊
salam brother , problem Is SIO programming or replacing the SIO and program it , thanks from Palestine
Waalaikumassalam, both could be the possibility.
thanks a lot , i hope to have the next video for the solution
Sure brother. We will upload the video soon.👍😊
LPC_FRAME after the DRAMRST# and the ram has passed and the chipset initialization is complete the LPC_FRAME# will start t action
may be LPC and PCI track is damage.
Sir lenovo T430 men IO (THINK ENGINE) ki pin num 76 sy 25 volt aaty hen battery charging k 1 mofet k gate ko enable karny liye, agar yeh 25 volt IO nahi nikal rahi to mosfet drain to source jumper kar sakty hen bajye IO replace, koi problem to nahi.
I have done this and laptop charging properly.
Good work...if you know and understand the logic then you can manipulate according to your requirement 😊👍
Learned many things after purchasing video trainings.😊
Thanks brother. Hope you do well and further improve your knowledge and skill. Proud to have you as a Laptex family member.😊❤️
If Dram power ok is missing then dramrst is not coming (cpurst is not generate)
Thanks for such sharing
Good. Keep supporting and Sharing our videos 😊
Awesome 👍
Thanks brother 👍. Keep supporting and Sharing our videos 😊
Lpc communication ho skta hai ya phir bios ke pass resitence khrab ho sakta hai
Good point. Let's see what's the actual problem in this case 😊. Keep supporting and Sharing our videos ❤️
Great
Thanks brother 👍. Keep supporting and Sharing our videos 😊
perfect bro . like sure👍
Thanks brother 👍. Keep supporting and Sharing our videos
and now i am understand what the pro we face in this board
Good bro... Keep supporting and gaining knowledge.👍
Sir A to Z sikhne ka kya charge hai?????
WhatsApp
+919031240767
For details
Bios communication error with pch can also be a problem .so resistance on BIOS pins check.(clk,DO,DI) both in put and output of resistors which can block communication for both bios,pch.
Good point. Hope that will be helpful for others as well. We will see the concept in the next part of the video 👍
Bro how much I have to pay in shop for this type of problems
Send to us we will check and update.
@@laptex1377 how can I send to you I mean location
Whatsapp
+919031240767
For address.
thanks sir
Always welcome dear 💖. Keep supporting and sharing our videos.
Helpful video
Thanks brother 👍. Keep supporting and Sharing our videos 😊
Sir, My Dell 5558 laptop beep for 7 times and if I retry back to back laptop gives same beep without any display but after few (4-5 ) hours if I try again it boot up successfully without beep sound. Any advice to fix it.
There is COMMUNICATION issue.. you can get it checked by local technician 👍
Ye hand gloves konse hai sir
Anti static gloves.
Nice sir
Thanks brother 👍. Keep supporting and Sharing our videos 😊
is 1.5VS present?
Watch part 2 you will get the information.
@@laptex1377 can you give the link for part 2
Sir mere dell laptop mein 7 beep problem h aapka service Center kahan h mere seher mein koi ye theek nahin kr paa rha h
Nehru place new delhi. Complete address is in the description of video.
In my Dell inspiron N 5050 laptop 7beeps with no display problem is coming, how to solve tell me pls
You can send to our office.we will check that.👍
What is the communication logic between pch Io chip
That's a very long chapter can't be explained here. You can avail the paid videos.😊👍
@@laptex1377 ok sir
How can I get the videos
Mera ek laptop hai dell 3542 auto shutdown ho jata hai ek bar repair karya to kuc mahine chale phir wahi problem ati hai aur phir on bhi ho jata hai aur khat se karke band ho jati hai kam karte samy kya kare bataiye sir 2 jagh dikha chuka hu koi bhi permanent solution nahi de raha hai please reply sir
Send to us we will check and update 👍
What is the communication logic sir
Everything can't be explained on UA-cam brother. It's in our course ☺️👍
How much it will cost to repair these problems
It's not fixed...it's done as per the faults.
HP 5 TIME CAPS LOCK KA KEYA HAL HAI
Check from basics. You will definitely get the solution 👍
@@laptex1377
RAM SLOT
Lpc ya pci clock check and lpc communication and core power good and convert supply all and main bios and physical bhi kuch Ho sakta hai
That's good point. These are all the possibilities for this type of fault in any motherboard. Good work.👍😊
Keep supporting and Sharing our videos 😊
Dell inspiring 3521 beeps once for bios
parte 2 ????????
It's in paid course.
I normally use power sequence chronologically
That's a good practice, but everything is not given in the power sequence. 👍
DRAMRST# missing 4 normally beeps
Mostly on this motherboard LPC signal track will damage.
Good experience 🙂
Problem in mb I'd resistor
Yes that could be one of the reason for this fault 👍. Let's see what's the actual reason in this case.😊
Same problem but you don't show how to fix 😔
Check LPC-PCI communication
Change the ram sir
Nope...it's not a RAM problem.
Lpc bus or lpc track problem
Good experience. There is a possibility of this problem 👍
Lpc_Clk is likely missing
This is could be one of the possibility of the 7 Beep. Let's see what's the actual concept behind this problem 😊
🤙
👍👍👍
Hi
Hello bro.
its a problem of bios
Not in this case
Lpc signal problem
Yes this could be a reason. We will see the concept in the next part of the video 👍