dell laptop 7 beeps no display । dell laptop 7 beeps on startup black screen

Поділитися
Вставка
  • Опубліковано 27 сер 2024
  • LAPTOP REPAIR ZONE. YOU CAN LEARN LAPTOP REPAIR FOR FREE.
    FOR BIOS, SCHEMATICS, BOARD VIEW PLEASE JOIN OUR FACEBOOK GROPE : / 483833708998722

КОМЕНТАРІ • 91

  • @naf4494
    @naf4494 2 роки тому +1

    Excellent guuding
    If voltages name could be in 1-line explaining, that's would be a bonus for us

  • @jeoffreytan3763
    @jeoffreytan3763 3 роки тому +4

    Sir..dell inspiron 15 3521..no display with 7 low beeps just like a knock sound..pls advise

  • @Tirkan
    @Tirkan 5 років тому +2

    VERY GOOD. RESPECT

  • @YamiMTA
    @YamiMTA 5 років тому +3

    Hello!
    I would like to ask you the following.
    I have the same problem as the video, after checking and see that I have the same results as you, remove the transistor and instead of 15v I have 10v, I still do not put a new transistor so I do not know the result. I would like to know some recommendations. Thanks and very good work!

    • @Laptop_repair_zone
      @Laptop_repair_zone  5 років тому +1

      You can replace a new N-channel mosfet or you can short with jumper wire.thanks.

    • @YamiMTA
      @YamiMTA 5 років тому +1

      @@Laptop_repair_zone I have turned to you again. After changing the UZ1 and effectively, it gives me current in the indicated terminals, which did not happen before. However, instead of giving me +15 volts like at 5:25, it gives me 9-10 Volts, and the error persists. In the + VCC_CORE (6:05) does not give me any voltage, it stays at 0. Do you think you could give me some indication of what else to check or review ?. Greetings and good work.

    • @md.saifulislam9155
      @md.saifulislam9155 5 років тому

      @@Laptop_repair_zone kindly make a video on how to short with jumper wire

  • @starmakervideos1984
    @starmakervideos1984 5 років тому +1

    Thanks so much brother.

  • @mandarpatil9434
    @mandarpatil9434 3 роки тому +2

    Sir, plz tell me what is the cost of this work you took from customer.

  • @DEvoUT4EvA
    @DEvoUT4EvA 3 роки тому

    Thank you so much, God bless you.

    • @Laptop_repair_zone
      @Laptop_repair_zone  3 роки тому +1

      Thanks for your comment. please share my videos and channel.

  • @georgekaramolegos
    @georgekaramolegos 5 років тому

    Really great video. I followed all the way till u search for the voltages . The voltages on uz1 show ok... what can i do next ?

    • @Laptop_repair_zone
      @Laptop_repair_zone  5 років тому +1

      thanks for your comment, please follow the schematic diagram.

  • @jimhoangvuofficial6488
    @jimhoangvuofficial6488 3 роки тому

    THANK YOU SO MUCH

  • @Chanakaicdl
    @Chanakaicdl Рік тому

    Thank you . . .

  • @DARKVRS
    @DARKVRS 4 місяці тому +1

    dell 3531 beep 7 LA-B481p

  • @md.saifulislam9155
    @md.saifulislam9155 5 років тому +1

    Every desktop, laptop motherboard has this 8 feet thing that looks like switching mosfet. Even graphics card board has it. Can I just get one from a motherboard and place on my Dell motherboard? Will it work?

  • @maccybersibs
    @maccybersibs Рік тому

    hie i have the same problem with the same motherboard you have fixed mine the +Vcc voltage is available everything is okay but its having 7 beeps no display can you assist me on that

  • @gangagrgsn4328
    @gangagrgsn4328 2 роки тому

    Thankyou 🙏

  • @faisalk2245
    @faisalk2245 4 роки тому +1

    Tnx sir

  • @leolearning3048
    @leolearning3048 4 роки тому

    Hi. QZ1 and QZ7 only 0.71 voltages. Also power led is on. No fan .no display. What should I check?

  • @rajeevsharma1842
    @rajeevsharma1842 2 роки тому

    On my borad uz1 show 11.32 v instead 15 as shown.
    One other legs it show 1.5.
    No voltage on pl 701 and pl700

  • @mecyanned
    @mecyanned Рік тому +1

    On my dell inspiron 5458, removing the battery and putting it back fixed this, this happens when i press the keyboard too hard

  • @md.saifulislam9155
    @md.saifulislam9155 5 років тому +1

    What is the name of the chip that you removed? What should I tell at Hardware store?

  • @ultrashock3202
    @ultrashock3202 5 років тому

    Hi, have same matherboard bat is going on 3sec and off all the voltage i have check and they are right whats the problem samone know;/? Super IO?.

  • @natty3109
    @natty3109 5 років тому +1

    where do i get the chip you change

  • @AbdoAbdo-cx6to
    @AbdoAbdo-cx6to 2 роки тому

    شكرا لك

  • @olabanjioyeyemi8997
    @olabanjioyeyemi8997 Рік тому

    Please I have the same issue with my laptop. How do I contact you to resolve this issue?

  • @panjipanji4012
    @panjipanji4012 Рік тому

    My laptop, firstly 5 beeps and no screen display. And one day, i cleaned RAM. Than I turn on my laptop give me 7 beeps and no screen display. I try turn on and than off about 5 times.
    My laptop was succesfully boot without beeps sound

  • @thusithaliyanage8754
    @thusithaliyanage8754 3 роки тому

    Best

  • @hasankaperera771
    @hasankaperera771 3 роки тому

    Thanks
    Would you please help me dell 3 beep code fix

  • @techparistech2659
    @techparistech2659 4 роки тому +1

    Hello I am facing the same problem GFX CORE missing any Points to check

    • @Laptop_repair_zone
      @Laptop_repair_zone  4 роки тому +1

      thanks for your comment.check +VCCSAP if present then check. +1.5VS ,+1.5V_CPU_VDDQ pu700. +1.5VS ,+1.5V_CPU_VDDQ

  • @almooalyalmooaly5703
    @almooalyalmooaly5703 5 років тому

    so thanks

  • @EdsonLemos-wc6se
    @EdsonLemos-wc6se 5 років тому

    ola ... minha medicao esta dando errado no mosfet 6644

  • @manuelcedillo854
    @manuelcedillo854 11 місяців тому

    You can replace uz1 with 4430 helo me

  • @missoumsoft107
    @missoumsoft107 3 роки тому

    help me i found 0V in PL600 and 0V in PL700, where is the problem

  • @ritiksoni5830
    @ritiksoni5830 4 роки тому +1

    Sir instead of 15v there is only 11.25v showing (uz1) please advice me 🙏🙏

    • @Laptop_repair_zone
      @Laptop_repair_zone  4 роки тому +1

      thanks for your comment, 11.25v its good enough,check +1.5VS is present or not,and follow the schematic diagram.

    • @wisdomugochukwu7742
      @wisdomugochukwu7742 3 роки тому +1

      same to my board, i just chnage the capacitor and resistor close to uz1 and boom it display and vcc core power was present

    • @manuelcedillo854
      @manuelcedillo854 11 місяців тому

      Value resistence please friend@@wisdomugochukwu7742

    • @manuelcedillo854
      @manuelcedillo854 11 місяців тому

      Value resistence uz20

  • @ernestogonzalez194
    @ernestogonzalez194 4 роки тому

    Hello there, I have around +7V in +VCCP, not +1V as you're...Should I replace PL500?, thank you in advanced!!

    • @ernestogonzalez194
      @ernestogonzalez194 4 роки тому

      +VCC_CORE also Not Present, all other voltages are ok, what should I replace for those two voltages not present, Thank You!!

    • @Laptop_repair_zone
      @Laptop_repair_zone  4 роки тому +1

      Thanks for your comment, please reflow or change PU500.

    • @Laptop_repair_zone
      @Laptop_repair_zone  4 роки тому +1

      Please join our Facebook group.

    • @ernestogonzalez194
      @ernestogonzalez194 4 роки тому

      @@Laptop_repair_zone already did, thank you so much!!

  • @rajeevsharma1842
    @rajeevsharma1842 2 роки тому

    No voltage on PU700

  • @abhishekdas149
    @abhishekdas149 4 роки тому +1

    In PL500 it is showing only 0.46 but in your multimeter it is showing 1.06

  • @hafizmuhammadabdullah68
    @hafizmuhammadabdullah68 3 роки тому

    Sir g cost?

  • @sajidmahajan4557
    @sajidmahajan4557 4 роки тому +1

    Sir my dell 3521 beeps 7 times on battery, but works normally on charger

    • @Laptop_repair_zone
      @Laptop_repair_zone  4 роки тому

      Thanks for your comment.check all the voltage with battery.

    • @manuelcedillo854
      @manuelcedillo854 11 місяців тому

      what is the value of the resistance uz20@@Laptop_repair_zone

  • @rajeevsharma1842
    @rajeevsharma1842 2 роки тому

    No voltage on pu 700

  • @dutunudutu7006
    @dutunudutu7006 2 місяці тому

    in my case heat up the processor do the job

  • @natty3109
    @natty3109 5 років тому

    please i need your help its the only laptop i have

  • @godwinwilliams2970
    @godwinwilliams2970 5 років тому +1

    Pls provide sound on your content

  • @manoharune6381
    @manoharune6381 5 років тому

    Hi, I have Dell 3537 with the same problem, 7 Beeps, one laptop repairer told me to change motherboard, plz give me some suggestions.

  • @jayant2159
    @jayant2159 3 роки тому

    Isn't the motherboard is same in Acer e1531 🤔

  • @abhishekdas149
    @abhishekdas149 4 роки тому +1

    +VCCSAP is showing zero... Where might be the error

  • @ranforandi678
    @ranforandi678 4 роки тому

    Hello Sir, I have an alienware 14 with the same problem ( 7beeps) but I can't find the UZ1 chip, any advice ?

    • @Laptop_repair_zone
      @Laptop_repair_zone  4 роки тому

      Thanks for your comment, alienware 14 and dell inspiron 15 not same motherboard you need to check all the required voltage step by step.

    • @ranforandi678
      @ranforandi678 4 роки тому

      @@Laptop_repair_zone do you maybe know which one is for the VCC Core on the alienware 14 main board?

  • @user-fj1ed2bz6f
    @user-fj1ed2bz6f 2 роки тому

    What is the reason for five beeps for the same motherboard

    • @Laptop_repair_zone
      @Laptop_repair_zone  2 роки тому

      Thanks for your comment. 5 beeps CIMOS battery, check your CIMOS battery.

  • @gomrinadjib1495
    @gomrinadjib1495 4 роки тому

    hallo i remove UZ1 but i don't find 15 V what is solition plz ?

    • @Laptop_repair_zone
      @Laptop_repair_zone  4 роки тому

      Thanks for your comment, please check out Dell inspiron 3521 LA-9104P no display, solved. ua-cam.com/video/CFc2fGDJd8M/v-deo.html

  • @midodido1941
    @midodido1941 5 років тому

    thank you sir

  • @md.saifulislam9155
    @md.saifulislam9155 5 років тому

    The switching mosfet in UZ1 has label on it but it's so small and scratched that I can't read. Can anyone help me with it?

    • @Tirkan
      @Tirkan 5 років тому

      SI4634DY bro

    • @md.saifulislam9155
      @md.saifulislam9155 5 років тому +1

      @@Tirkan Thanks. I removed the mosfet in UZ1 and motherboard is not making sound anymore. Cooling fan is working. Battery is charging but no display. My friend said that I must find exact mosfet to replace. Can I just get any mosfet that looks like it and place it? Will it work?

    • @md.saifulislam9155
      @md.saifulislam9155 5 років тому

      @@Tirkan motherboards and graphics cards have mosfet that looks like the one I removed from UZ1. can I try with any one or it have to be exactly same? I really don't know where to find this.

    • @Tirkan
      @Tirkan 5 років тому

      You have eBay?

    • @Tirkan
      @Tirkan 5 років тому +1

      You Must put the Same mosfet. If you found from another motherboard you can take it

  • @vishnuam1291
    @vishnuam1291 4 роки тому

    What will it costs?

    • @justbesimple007
      @justbesimple007 Рік тому

      For normal people it costs Around ₹2000 to ₹3000 at work shop.
      But for technician it costs only ₹500/-

  • @lazirirabah9123
    @lazirirabah9123 3 роки тому

    NO

  • @basicgardeninghd
    @basicgardeninghd 3 роки тому

    no voice

  • @abumohammed4168
    @abumohammed4168 3 роки тому

    Thanks sir