Card scraper VS. Standard scrapers__how and where to use it
Вставка
- Опубліковано 26 сер 2024
- Using card scraper can have its place,but I'll show why I don't use it all that much and what are alternativas...
Enjoy
______________________________________________
AFFILIATE LINKS
KS SCHULTE
MIDI 2 PLUS LATHE
ksdrechselbeda...
KS BOWL GOUGE
ksdrechselbeda...
CROWN BOWL GOUGE
ksdrechselbeda...
KS SPINDLE GOUGE
ksdrechselbeda...
REVOLUTION TOOL ksdrechselbeda...
REVOLUTION MIDI
ksdrechselbeda...
RAZOR EDGE BOWL GOUGE
ksdrechselbeda...
RAZOR EDGE SPINDLE GOUGE
ksdrechselbeda...
STANDARD SCRAPER
ksdrechselbeda...
______________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz...
Spindle gouge -www.gurtool.cz...
Calipers - www.gurtool.cz...
Sanding pads - www.gurtool.cz...
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
______________________________________________
TELACK
www.telack.hr/...
SANDING DISCS 75mm INDASA
www.telack.hr/...
SANDING ROLLS INDASA
www.telack.hr/...
Thank you very much for watching 🤗
You’re such a talented turner. Thank you again for sharing your expertise. I wish I had a hands on mentor to teach me. Everything I do, ive taught myself from watching videos like this. And I’ll be completely honest, I look up to you as a mentor. Sometimes I’ll watch your videos several times. To make sure that I have gained everything possible. Then I go to my shop and turn.
Thank you very much for your support, basicsly I did the same, I took every advice from Richard as we are on different part of the planet, I took his every mail and messege and help note and just practice, also with his books ....
Thank you once again 🤗
@@tomislavtomasicwoodturning thank you. Also I added a profile picture here. I’m new to all of this stuff. Please take a moment and look at the picture. It’s all my work sitting on my dining room table. Let me know where I need improvement.
@@keithedwards1038 its hard to tell like from pictures as sometimes is more to the feel, however even if you are someone with more expirience you still want to improve or at least try something new on every bowl....
@@keithedwards1038 i would say that your work is really good, some pieces may look a bit heavy, maybe chunkier but again someone may like that.....
Have you tried to sell some of it?
People who buy often give good feedback as well
@@keithedwards1038 all in all for someone who just started out your work is really good
i have used card scrapers for 30 years and never thought of using them on the lathe, great idea! thank you
Thanks for watching
Thank you for yet another approach to solving grain tearing problems. I've been using card scrapers for years and like Jason, never thought of using them on the lathe. Thank you!
Thank You for watching 🤗
Wonderful as always. A set of fiddle makers/luthiers scrapers could also prove useful for different curves.
Indeed they can be quite usefull ☺️. Thank you very much
Great informaiton again Tomislav! Another tool for the toolbox.
Thank you🤗
I'd heard about card scrapers on the lathe but apart from a brief clip of David Marks using one I haven't seen a useful discussion. This is a very useful demonstration, thank you.
I might try grinding a concave scraper on my bench grinder for faring outside curves.
Thats great idea as curved scraper is much easier to use on outside....😀 thank you for watching
it would be great to see your results if you try it.@@tomislavtomasicwoodturning
@@BasiliskFilm there is a video already out...
Amazing craftmanship 👍👍
👍
🕶Thanks Tomislav
Thank you😀
As Always, very informative and helpful thank you so much for sharing your knowledge.
Thank You for watching
Very nice. It's a good day when you start sanding with 240 or 320🙂
Always 🤗
Nice video, very informative.
Glad to hear that
Does it get hot to the touch?
Nope..... its more hot when used by hand on board
Because of the ash boring beetle, ash is a firewood staple. I burn wood for heat so I pick through and use a lot of ash. Is this scraper card wood? It seems hard enough.
I've heard of ash sick , thankfully its not as a issue here in Croatia....