They are making alot of tools in USA again. Fun fact stanley black and decker own craftsman and dewalt. The craftsman feels alot like the dewalt. Even looks alot alike
Craftsmen makes a higher end version with metal components and measurements on the base like the Milwaukee. I actually thought the Milwaukee was the higher end craftsman saw when the video started. They look identical.
I have the full set of these tools, including mitre saw. Use them at work since I am always in my van and a power source is not always an option. They work great. Have a bunch of Milwaukee tools as well. But my company pays me 300 a quarter for tools so I was able to get more for my money. Buy the 4.0 amp batteries and you can't go wrong.
Orejon Cabron The 4 Amp hour Batteries usually provide more run time, making the Craftsman tools a pretty decent tool for the money. Look for the sales, (which come around pretty frequently.) You can find a two pack of 4ah batteries for $99. Also look for the sale on their double battery fast charger. Charges two batteries quicker than a regular charger and it too goes on sale for $99.
@@StatelessOne that's not what higher amp dc batteries do. It doesn't boost power, it boosts how long you can sustain power with the tool. They last a long time. Hold alot of energy.
It surprisingly does, I think the Milwaukee, even with slower rpm may have more "torque", if that makes sense, but the craftsman cut through just fine, probably should have tried some ripping on the 2x lumber, but I feel it would do just fine. The craftsman is very minimalistic, but it is small and light weight. Also, I think the craftsman just feels better in the hand, but that's a personal preference.
And looking for more information on this product how do you put the blade in I bought one the small ones I'm trying to figure out how you get the blade in
I don't have mine ant more, but should have come with an Allen key wrench to remove the bolt that holds the blade in, the threads are reversed so keep that in mind.
Sounded like the craftsman was bogging a bit on the 45 cut. What are the torque specs on those? I’d imagine the Milwaukee wins in that department. I’ll take torque over rpm in a saw.
If craftsman would put in a brushless motor I would be more inclined to buy as seeing I have there new brushless impact drill and it has impressed me so far.
Brushless doesn't always mean better my dewalt brushed 61/2 is more powerful than the Brushless version the only thing Brushless gives is a few more cuts
You compared a good Milwaukee to a cheap Craftsman. Compare your Milwaukee to the Craftsman Brushless, they have all the options you want, comparing apples to oranges
I picked up the 36v makita rear handle saw a couple months ago went to go do some stuff around the house with the brushed 6 1/2" makita single battery saw and thought the battery was dead complete difference in power
I almost picked one up on clearance at home Depot, but don't have any Makita batteries so passed, what I do kind of regret was passing up a Makita sub compact drill impact and recip saw kit that was on clearance for 150.00, just too close to the holidays.
@@ryanjewell9832 if I could only buy one tool from makita it would be that saw it is a killer I can go all day pretty much framing a house on 2 5.0s those little saws dont have shit on it should of grabbed it
@@teeg3275 nice, I actually use a Milwaukee fuel for work, and it works rather well. Good to know about about the Makita. I may keep it in the back of my mind if I run across another saw.
Craftsmen is only tools i can afford and have access to i dont have a harbor freight anywhere close to me but did get the deqalt xr sawzall be ause thats a tool u dont go cheap on
Yeah, it's kinda a slight concern, I figured they could have at least done a metal upper like the DeWalt. Im going to put this saw on a kreg track and cut some Corian counters not this week but next and see how it holds up.
I've had an old B&D corded circular saw for over 30 years and the plastic guard is still in good shape.. Never had a problem with the saw so no complaints here..
Joe Walsh I feel the same but I really wonder I mean why would you need a metal guard? I figure as long as it is put together right and it’s durable then surely the only thing I could imagine going wrong it the blade tearing it up. Maybe chips of wood could break it to pieces? I’m not for sure but I would like to know why I metal guard could be a necessity
Both of those cordless saws struggled with the 1.5" material. It looks like the motors are finishing caliber for < 1" material. At $120 they do not compete with the finishing material circular saws. Good, honest video.
I can’t speak to the 16 gauge nailer, but I recently purchased their 18ga nailer, and so far, my co workers and I have been impressed. We were working with 3/4” oak trim and did a built in oak bookcase and it was up to the task.
I'm using the 16 gauge craftsman and have been using it for a year now or so. It's pretty consistent when using the same wood I break it out when I need my glue up to hold fast it cuts my time in half I don't have to wait till dry. Might do a review for those that are interested.
I have both the 16 and 18 gauge mailers. I prefer the 18, it seems to shoot faster. But both are good. I use them professionally, I own a stair renovation company and I use the 18 for treads and risers and I can shoot it all the way through 1.25 in red or white oak. I use the 16 for handrails and newel post. I use it to temporarily hold the handrails in place while I screw them in permanently. The only problem with BOTH is that they don't have a dry fire protection. You have to look to make sure you have plenty of nails because if you dont, it will fire and feel completely normal but there won't be a nail there.
Couldn’t agree with you more on Craftsman needing to have more of a brushless line. I do ask in your opinion how much power loss is there if you stick with the 20v rather than 40v
@@Electrodewelder I was thinking about doing it against the 887, but the 885 would be a good start. It will be the first cordless DeWalt 20v tool I aquire. People seem to love those 885s
the 885 is the best most toughest impact driver i've ever used even compared to milwaukee or hilti but the 887 has failed me and in other videos i've watched its not worth it- save yourself the money and time it aint worth it. I've been a welder, and carpenter for a while and i've owned the 885 for 10 years no problem but the 887 is a no go. link to video:ua-cam.com/video/Prg80c9yJyo/v-deo.html&list=LL7hAAZDJ1G18Rbl3Ah9DbpQ&index=27 skip to 2:54 for action)
@@Electrodewelder I've seen that vid as well lol. I will give the 885 a test drive, I am a Milwaukee fan, my first Milwaukee impact gave me close to 10 years of use and abuse between me and letting laborers use it, then I got the brushless and something happened to it, I don't know if it was the generic battery I was running or a defect. Upgraded to a surge and a gen 2 fuel after that. I have nothing against DeWalt, have a couple corded tools by them.
Plastic gard...DEAL BREAKER..What if a freak accident like one of the carbide teeth give way at high rpm..what's gonna deflect it plastic are metal...that's what I thought..
The plastic guard will outlast the metal I've dropped my porter cable many times never had a problem but I've dropped my Makita with a metal guard and it cracked because it was made of magnesium which is a very brittle metal and doesn't give where plastic does
I am aware of that, I'm just saying it would be a nice touch, something like Ridgid has. But I don't think their power tools ever had a lifetime warranty even when owned by Sears. Stanley b&d still offer lifetime warranty on the new lines of Craftsman hand tools.
I have over eight craftsman power tools and olive them !!!!
You can get the Craftsman bare tool for $79 at Lowe's.
How many cuts do u get from a battery
That would be cool if craftsman is fully returned back to made in U.S.A.
I totally agree!
I’m Canadian🇨🇦 And even I agree 😂
They are making alot of tools in USA again. Fun fact stanley black and decker own craftsman and dewalt. The craftsman feels alot like the dewalt. Even looks alot alike
Craftsmen makes a higher end version with metal components and measurements on the base like the Milwaukee. I actually thought the Milwaukee was the higher end craftsman saw when the video started. They look identical.
I have the full set of these tools, including mitre saw. Use them at work since I am always in my van and a power source is not always an option. They work great. Have a bunch of Milwaukee tools as well. But my company pays me 300 a quarter for tools so I was able to get more for my money. Buy the 4.0 amp batteries and you can't go wrong.
did you find that the 4.0 batteries adds a dramatic boost to the power?
Orejon Cabron The 4 Amp hour Batteries usually provide more run time, making the Craftsman tools a pretty decent tool for the money. Look for the sales, (which come around pretty frequently.) You can find a two pack of 4ah batteries for $99. Also look for the sale on their double battery fast charger. Charges two batteries quicker than a regular charger and it too goes on sale for $99.
@@StatelessOne that's not what higher amp dc batteries do. It doesn't boost power, it boosts how long you can sustain power with the tool. They last a long time. Hold alot of energy.
Hook a power source to your van
@@Kevin-qo6jw I have an inverter to charge a bank of batteries. I don’t work with corded tools anymore at all. Not needed for what I do
Ive always liked the craftsman tools! Sure glad they kept them on the market! The saw seems to have good power!
It surprisingly does, I think the Milwaukee, even with slower rpm may have more "torque", if that makes sense, but the craftsman cut through just fine, probably should have tried some ripping on the 2x lumber, but I feel it would do just fine. The craftsman is very minimalistic, but it is small and light weight. Also, I think the craftsman just feels better in the hand, but that's a personal preference.
And looking for more information on this product how do you put the blade in I bought one the small ones I'm trying to figure out how you get the blade in
I don't have mine ant more, but should have come with an Allen key wrench to remove the bolt that holds the blade in, the threads are reversed so keep that in mind.
Sounded like the craftsman was bogging a bit on the 45 cut. What are the torque specs on those? I’d imagine the Milwaukee wins in that department. I’ll take torque over rpm in a saw.
Yeah, it's actually pretty weak, cut a wet 2x10 the other day and she kept stopping. It's definitely a dyi tool.
If craftsman would put in a brushless motor I would be more inclined to buy as seeing I have there new brushless impact drill and it has impressed me so far.
Absolutely! I had both impact and drill, wanted to make a vid of the drill, but unfortunately it was stolen.
I love my Craftsman impact driver. I always went Dewalt but red is my sons favorite color.
Brushless doesn't always mean better my dewalt brushed 61/2 is more powerful than the Brushless version the only thing Brushless gives is a few more cuts
I just got that craftsman circular saw. Is really nice
What was the price diffrence? And you can get 2 4 amp hour batterys for 60 on Ebay
You compared a good Milwaukee to a cheap Craftsman. Compare your Milwaukee to the Craftsman Brushless, they have all the options you want, comparing apples to oranges
That Milwaukee is the cheapest one they made, and brushed, why would I compare a brushed Milwaukee to a brushless craftsman?
I picked up the 36v makita rear handle saw a couple months ago went to go do some stuff around the house with the brushed 6 1/2" makita single battery saw and thought the battery was dead complete difference in power
I almost picked one up on clearance at home Depot, but don't have any Makita batteries so passed, what I do kind of regret was passing up a Makita sub compact drill impact and recip saw kit that was on clearance for 150.00, just too close to the holidays.
@@ryanjewell9832 if I could only buy one tool from makita it would be that saw it is a killer I can go all day pretty much framing a house on 2 5.0s those little saws dont have shit on it should of grabbed it
@@teeg3275 nice, I actually use a Milwaukee fuel for work, and it works rather well.
Good to know about about the Makita. I may keep it in the back of my mind if I run across another saw.
Why is the saw LEFT HANDED?
Its not?
Craftsmen is only tools i can afford and have access to i dont have a harbor freight anywhere close to me but did get the deqalt xr sawzall be ause thats a tool u dont go cheap on
I don't know that i would trust a circular saw with a plastic guard
Yeah, it's kinda a slight concern, I figured they could have at least done a metal upper like the DeWalt. Im going to put this saw on a kreg track and cut some Corian counters not this week but next and see how it holds up.
I've had an old B&D corded circular saw for over 30 years and the plastic guard is still in good shape.. Never had a problem with the saw so no complaints here..
That Milwaukee also has a plastic guard on the bottom half
@@christiansandoval8139 I don't know about the newer ones, but mine is all metal.
Joe Walsh I feel the same but I really wonder I mean why would you need a metal guard? I figure as long as it is put together right and it’s durable then surely the only thing I could imagine going wrong it the blade tearing it up. Maybe chips of wood could break it to pieces? I’m not for sure but I would like to know why I metal guard could be a necessity
Didn't think the craftsman was going to make it. Milwaukee didn't seem to struggle. The 12v compact milwaukee saw costs more lol.
Both of those cordless saws struggled with the 1.5" material. It looks like the motors are finishing caliber for < 1" material. At $120 they do not compete with the finishing material circular saws. Good, honest video.
Also, that was wet 2x material, they may be better labeled as trim saws.
I have that same Milwaukee saw, with a 5amp battery, it cuts through anything
you must test battery life on this, how many times cuts 2 by10
i Would like to see someone do a review on there 16 gauge nailer
I can’t speak to the 16 gauge nailer, but I recently purchased their 18ga nailer, and so far, my co workers and I have been impressed. We were working with 3/4” oak trim and did a built in oak bookcase and it was up to the task.
I'm using the 16 gauge craftsman and have been using it for a year now or so. It's pretty consistent when using the same wood I break it out when I need my glue up to hold fast it cuts my time in half I don't have to wait till dry. Might do a review for those that are interested.
I have both the 16 and 18 gauge mailers. I prefer the 18, it seems to shoot faster. But both are good. I use them professionally, I own a stair renovation company and I use the 18 for treads and risers and I can shoot it all the way through 1.25 in red or white oak.
I use the 16 for handrails and newel post. I use it to temporarily hold the handrails in place while I screw them in permanently.
The only problem with BOTH is that they don't have a dry fire protection. You have to look to make sure you have plenty of nails because if you dont, it will fire and feel completely normal but there won't be a nail there.
Can you charge the 20v 4.0 on the charger that came with a 20v 2.0?
Yes you can, they are the same charger.
Ryan Jewell thank you much sir!!!! So I am assuming that you can also charge the 20v 6.0 as well.
@@jpeso8374 you're welcome, and yes, you can also charge the 6.0 batteries as well on the same charger.
Couldn’t agree with you more on Craftsman needing to have more of a brushless line. I do ask in your opinion how much power loss is there if you stick with the 20v rather than 40v
I like my set not to bad for homeowner
Diablo!!! 😎👍
Man those diablo blades are awesome. 😎
The Milwaukee guards aren’t just metal, they are made from magnesium. The shoe is made of aircraft aluminum. I know because I own one.
I agree for home owner. No prob. Jobs? Not so sure. However I always packed a corded saw anyways.
Are they 7.1/4
No, both are 6-1/2
whats up ryan i was wondering if you could try the dewalt dcf885 20v impact against the craftsman 20v
I may be able to arrange that. Let me see what I can do.
thanks ryan- i'm tell'in you that 885 wont disappoint you- it's one bad as a hog impact.
@@Electrodewelder I was thinking about doing it against the 887, but the 885 would be a good start. It will be the first cordless DeWalt 20v tool I aquire. People seem to love those 885s
the 885 is the best most toughest impact driver i've ever used even compared to milwaukee or hilti but the 887 has failed me and in other videos i've watched its not worth it- save yourself the money and time it aint worth it. I've been a welder, and carpenter for a while and i've owned the 885 for 10 years no problem but the 887 is a no go.
link to video:ua-cam.com/video/Prg80c9yJyo/v-deo.html&list=LL7hAAZDJ1G18Rbl3Ah9DbpQ&index=27
skip to 2:54 for action)
@@Electrodewelder I've seen that vid as well lol. I will give the 885 a test drive, I am a Milwaukee fan, my first Milwaukee impact gave me close to 10 years of use and abuse between me and letting laborers use it, then I got the brushless and something happened to it, I don't know if it was the generic battery I was running or a defect. Upgraded to a surge and a gen 2 fuel after that. I have nothing against DeWalt, have a couple corded tools by them.
Craftsman never had a lifetime warranty on power tools!
The Milwaukee looked faster to me
no power, waste of money, buy 15amp corded saw
I have that craftsman saw. It’s junk
Craftsman power tools never had a liftime warenty. There hand tools did but not the power tools
I know, was just thinking it would be nice if they did to maybe compete with Ridgid.
The other saw company own. Craftsman now.
See the review on my channel, takes a different twist
I don't touch crapsman
Plastic gard...DEAL BREAKER..What if a freak accident like one of the carbide teeth give way at high rpm..what's gonna deflect it plastic are metal...that's what I thought..
One could what if all day long...
The plastic guard will outlast the metal I've dropped my porter cable many times never had a problem but I've dropped my Makita with a metal guard and it cracked because it was made of magnesium which is a very brittle metal and doesn't give where plastic does
Great vid bro
The brushless saw is shit
They don’t do the lifetime warranty because craftsman is now owned by Stanley, the same company that own dewalt, porter cable, and black & decker
I am aware of that, I'm just saying it would be a nice touch, something like Ridgid has. But I don't think their power tools ever had a lifetime warranty even when owned by Sears. Stanley b&d still offer lifetime warranty on the new lines of Craftsman hand tools.
Still a lifetime warranty on hand tools.
Craftsman tools feel like toys. Their not very sturdy. If im going to go cheap i rather have a ryobi.
GRAWLIX 19xx this is the new craftsman owned by DeWalt.
Actually they are both own by black and decker
Yah Stanley tools owns all of them or Stanley Black and Decker rather
I have the Dewalt 6 1/2 it's way more powerful than both of these
Chevy cruze meet Audi RS5