Does it feel like it stalls when you downshift because I made the same exact 125cc chopper bike and mine feels like it kicks too hard in first gear and then stalls when I slow down
@@whiskeethrottlerproduction3735 thanks one last question I am extending my frame in front of the seat post 9 inches will I still need to cut the seat post
Sorry to keep bugging you but do I need to make sure the rear sprocket is 428 chain. Or is a 420 chain sprocket fine. I've heard that 420 is fine but I'm not sure
Just motorized bike throttle and gas tank also a motorized bike rear sprocket on the rear wheel. I would weld a flat plate on the bottom of the frame and use the 4 bolts on the bottom of engine to mount
You and I think alike! I would never build a 2-stroke Bike, this is the only way to go! Ya put the biggest 4-stroke motor you can on it and never have to even open it up, cuz you have more than enough power!!@@whiskeethrottlerproduction3735
Dude that’s literally a dirt bike engine
I've ridden plenty of bikes with no brakes but never with a motor.
Shoe Chew it has brakes now just didnt have very good brakes when i made this vid
Just because your bicycle doesn't brakes you have default Flintstone brakes equipped
Hello brother where u get that's sprocket and how you mounted
@@jesusgutierrezgarcia1449
Look up "motorized bike hub adapter"
They come in different sizes so measure your hub.
And where did you buy your rear sprocket.im having trouble finding one meant. For 428 chain
I did the same thing a few months before you and have a custom shotgun exuast
Does it feel like it stalls when you downshift because I made the same exact 125cc chopper bike and mine feels like it kicks too hard in first gear and then stalls when I slow down
Mine does not do that. Do more oil changes more often and your transmission should loosen up a bit new lifans always shift hard.
Could you post your built video, step by step, thanks, joe.
Yeah go in the snow ....grate video wow thers Walker's in the barn ,,yes,
Hellyeah man! Ive been wanting to use this same exact motor. What all did you have to do with the rear wheel to get that sprocket on there
its a hub adaptor. search ebay for it.
It’s strong enough 😭
Yup hub adapter for a occ chopper
How the hub adapter look? Is the one that clamps into the hub.. and has 3 screws?@@whiskeethrottlerproduction3735
haha that is nuts
Stock762 thanks man i worked hard at this bike it hauls ass
Where'd you get the motor? Drop a link please 🙏🙏
Where did u get a sprocket adapter?
need disk brakes
I want to build this same bike but need help. I have the frame, motor, wiring, just need some tips on the framework.
How did you get the chains on 😊
I want to build one with a pit bike motor an what i have is a west coat chopper need help with raiseing the seat an orther things
Can you post more?
What moter did you use?
Yoooooo where can i get that type of sprocket
Hell yeah son👍
How fast would you say a firestorm 100cc could go you reckon?
What engine is in there, building one myself
125cc lifan
How do you get these motors to go that fast best I can get on a stock motor and parts is 42 and thats on my seeutek pk80 80cc
This is a lifan Honda clone engine
Can you please make a video of explaining what happened to it? I'm about to do this with my bike
i would if i still had it but it is long gone
Why? What happened to it? Did the mounting for the motor tear the bike apart? Or did it crash?
levy a sold it to buddy nd he crashed it
Awe man still a nice bike
lasted almost a year of beating the shit out of it at least
did you have to do any welding or any custom stuff? or did you just but parts and slap em together?
Had to chop the frame up and make room for the motor. Then welded motor mounts so yes alot of fabrication
@@whiskeethrottlerproduction3735 ohh ok thanks because im thinking about doing the same thing.
Holy jingle bells batman. That's some good shit there
How can I make my 80cc sound like this 😂😂😂😂
Chop the muffler off
That's a 125
Headers
Where there any special things you needed to do to the install it ?
G Solomon yes had to cut out the seatpost pole
How did you do with the chain alinement
very simple just used a lazer pen to line up the sprockets
Impressive that little bike goes good
Does the motor come with a carb or do I need to get one too
motor usually comes with carb read the deescription before you buy one online though.
@@whiskeethrottlerproduction3735 thanks one last question I am extending my frame in front of the seat post 9 inches will I still need to cut the seat post
no then you should be good to keep the seat post the way it is
@@whiskeethrottlerproduction3735 thanks so much
Sorry to keep bugging you but do I need to make sure the rear sprocket is 428 chain. Or is a 420 chain sprocket fine. I've heard that 420 is fine but I'm not sure
Any specific modifications done to the frame for the motor to fit ?
Ya gotta cut out the seat post for the motor (his is a 125cc) to fit.
An 80cc motor fits perfectly within the frame without any frame modification. You just need motor mounts.
What engine is that and how did you mount it
Very very cool!
I'm getting my motor of amazon so I can do this but where did you get the accessories like the throttle and etc
Just motorized bike throttle and gas tank also a motorized bike rear sprocket on the rear wheel. I would weld a flat plate on the bottom of the frame and use the 4 bolts on the bottom of engine to mount
@@whiskeethrottlerproduction3735 ok thanks
Awesome build
How'd you make it sound that good??? Sounds like a mini Harley Davidson!
Will Carter very short pipe. was temporary, i eventually extended it.
I want one built like that! I want one that sounds that good! Hell yeah!
What kinda engine kit did ya use?
Will Carter not a engine kit all custom. used a 125cc dirt bike engine
You and I think alike! I would never build a 2-stroke Bike, this is the only way to go! Ya put the biggest 4-stroke motor you can on it and never have to even open it up, cuz you have more than enough power!!@@whiskeethrottlerproduction3735
Do u know anyone in south fla that installs engines on occ choppers??
I was going to build the same bike .pretty much .bad ass dude that's awesome.
how did you mount your rear sprocket? I'm doing the same exact project.
Boost Hungry 3 point hub adapter sprocket on ebay make sure you get the right size though
@@whiskeethrottlerproduction3735 also what size sprocket did you use? How many tooth?
40 tooth
@@whiskeethrottlerproduction3735 what is the rear hub size
I have a 2004 Schwinn Stingray O.C.C. and want to put a 3 hp motor on it. How fast would it go? If anyone knows, tell me.
Trevor Spurlock about 30mph
Thanks
What about a lawn mower engine
Trevor Spurlock about the same speed unless you amp up the motor
What would I do to amp it up
It really moves
Did you have any issues with the bearings. I know they aren't meant to go 55/60.
Evan Warner bearings held up ok the bike took the abuse pretty well. But my friend crashed it after I sold it
@@whiskeethrottlerproduction3735 how much. did it sell for. If you sold it to a friend for cheaper how much do you think it could have sold for.
Evan Warner 750
@@whiskeethrottlerproduction3735 thanks
@@whiskeethrottlerproduction3735 what currency. USD?
surely the cops won't catch on.
at last someone already built it! nice one! can u still use the pedal? do u have a vid using ur pedal? more vid pls..:)
yes you can still use the pedals
That’s fkin awesome
Soooo where's the prof that it goes 60mph?
There is another video I just watched it
What is the name of that engine
Tartsitter lifan 125cc manual
Nice build
You should ride it to Sturgis
You can take the pedal crank off now
Hectic brother, but there’s no such thing as too much power.
I here that bro
Check out these four brand new OCC Schwinn motorized choppers: ua-cam.com/video/eKw4jxdTO3c/v-deo.html
Want to sell it
How fast is it?
Rambooo 60 mph it can go 75 mph if i gear down i just got it geared for tourqe
nice, but where did you bought the parts?
Rambooo all custom. Bought a 125cc lifan motor and slapped it in the occ chopper. Not hard but not for novice builders either
whiskee throttler how much was the 125cc, and what size was the bike ?
" Need front disk brake's " Ebay $ 7.00
But looks pretty good