How To Make Your Own Clay Lubricant - Optimum No Rinse

Поділитися
Вставка
  • Опубліковано 3 гру 2024

КОМЕНТАРІ • 155

  • @bekiro28
    @bekiro28 4 роки тому +57

    onr bottle cap is exactly 0.5 oz by the way
    its been design that way for easy use one cap in the 32 oz bottle and go to town with it :)

    • @esperanzahierro7538
      @esperanzahierro7538 2 роки тому

      Thank you for the tip.

    • @Barrystimetoshare
      @Barrystimetoshare 5 місяців тому

      The meniscus from that Pyrex would not be as ideal as the cap for accurate measurments. 🤓

  • @Thamac15
    @Thamac15 3 роки тому +3

    I use this to wipe off the wheels when I’m done with the paint, I have hard water in New Mexico and no matter how clean your weeks are when washing, they have that hard water cloudy look after drying. This does really well for making them clean.

  • @ejoautovideos
    @ejoautovideos 5 років тому +14

    Claying is in my opinion one of the scariest part of detailing because of the risk of inflicting more scratches. Having a good lubricant and a high quality clay is key.
    Great video once again my friend!

    • @ChromaticGarage
      @ChromaticGarage  5 років тому +4

      Yeah man! I find transitioning to new clay often is the most important aspect, which unfortunately is the most expensive part. I was watching a video the other day and heard someone say their clay lasts a year, as a detailer. Very scary haha. Thanks Buddy!

    • @PatTheRiot
      @PatTheRiot Рік тому

      Dont get me wrong I agree 100 on the clay and lube, but honestly, to me atleast, its the most relaxing and satisfying part. Just keep it slick and work that clay always. You're cutting or polishing either way after. Best trick is to loosen the clearcoat crust with a tar/iron remover soak first. Everything will come right out smooth if you keep it lubed. That crisp vibration of the fingers on cleared paint is on my top satish detail fetish 😂 I almost dont even look at the paint when im claybaring it. Its all feel. Nothing like stubborn tar spots that goes loose at the first pass or require a little side clay roll to let go. That confidence to start cutting it builds up and you can feel where the car needs love.

    • @302esky
      @302esky Рік тому

      Clay bars are now long gone the clay towels are the way to go and the clay mitts and clay sponge pads, If you drop them wash it out thoroughly and continue ..Clay bars throw it away when you drop them .. yes it is scary

  • @mccracmiler
    @mccracmiler 2 роки тому +2

    Thanks…. This is exactly what I needed. FYI. The cap for the No Rinse is 1/2 ounce

  • @coachtim6188
    @coachtim6188 3 роки тому +17

    Oh my word the sound of that chalk. Am I the only one cringing with hair standing up on my neck? Lol Great video and editing though. Thanks!

  • @glossfx8452
    @glossfx8452 5 років тому +9

    Thanks for the dilutions and how to mix it, very simple.

  • @davidsteckley8846
    @davidsteckley8846 3 роки тому +8

    Always use distilled water. Guarantee no water spots if it drys

  • @darylyeo1446
    @darylyeo1446 4 роки тому +2

    I am using the rinse and wax. I mixed 1:64 and it don’t work well with heavy duty clay bar. 1:32 much more effective. I used 1:20 for detailing - do you think this is a waste?

  • @simonvance8054
    @simonvance8054 4 роки тому +8

    Thanks bro... I just knew bottled lube was more about the companies making money out of something cheap that we can make ourselves...cheers!

  • @Terminatorcobra04
    @Terminatorcobra04 4 роки тому +3

    Another great video, I appreciate you sharing this with me! I'm in the process of building my detailing business.
    I've been exploring cost-saving options, while still being able to use quality products.

  • @Des420
    @Des420 5 років тому +8

    I like the alternative use for ONR. I do not like the noise writing on that board makes.

    • @ChromaticGarage
      @ChromaticGarage  5 років тому +1

      Des420 haha my apologies, should have put a trigger warning. Have a good week buddy!

  • @ericlewis5035
    @ericlewis5035 5 років тому +6

    Cool video. This is very helpful. That's way better then spending $20 for clay bar kit

    • @ChromaticGarage
      @ChromaticGarage  5 років тому +1

      Thanks Eric! Yeah I can't believe how expensive something so simple is. This definitely saves a bunch of money if you're claying regularly or not!

  • @KelvynGoveo
    @KelvynGoveo 4 роки тому +2

    I am all about saving money! plus if you are claying you should be polishing after. Yet some may argue that its not slippery enough but even with the more expensive/slippery options you are still likely to leave some micro marring behind hence why you should be polishing after. great video !
    do you ever use claying mitts instead of clay they are much easier to clean ?

  • @seanellen6514
    @seanellen6514 4 роки тому +3

    Just so yall know the product actually recommends only 1 Oz per TWO gallons which equals out to 1/8 of oz per 32oz bottle. So you can literally just put a little bit in the bottle and not even worry about measuring it out. 1/8 of an oz is like a short trickle

  • @sublimegirl1
    @sublimegirl1 4 роки тому +9

    Im pretty sure he added a full ounce of the Optimum No Rinse... or it looked that way. But still awesomely helpful video. Thanks!

  • @danmorrissette4814
    @danmorrissette4814 5 років тому +5

    HellCat Monthly Payement !! lmao~~~~~!!!!!! Dude..0.5 oz to 1 litre !! You just made my Day !!!!!!!!!!!!! Ordering Optimum Asap!! Thanks a Million!! ;-)-

    • @ChromaticGarage
      @ChromaticGarage  5 років тому +2

      Haha you know it! Add a little bit more product and you have an awesome detail spray as well. So many options!

    • @ballistictushar
      @ballistictushar 5 років тому

      @@ChromaticGarage Like 1.5 oz?

  • @eldetalleautocare
    @eldetalleautocare 4 роки тому +2

    Once again! GOAT 🔥👏🏻

  • @pandassudsnshine4125
    @pandassudsnshine4125 3 роки тому +2

    Be cheap use window cleaner. I use nanoskin pad and clay bar for small areas by trims ect. You can even use a bit of car shampoo in a sprayer bottle. These two things you have anyways. No need for ONR.

  • @VeriousSmithIII
    @VeriousSmithIII Рік тому

    Thanks for the video. Definitely saved me some money

  • @mgo810
    @mgo810 4 роки тому +2

    Mad math conversation skills 👍

  • @h-townfishing1382
    @h-townfishing1382 4 роки тому +1

    i did this and its great. man it looks like there isn't enough product in mine but ik there is lol. great stuff

  • @earthangel8875
    @earthangel8875 3 роки тому

    Shots every time he "Claps" his hands. Good info by the way.

  • @robans
    @robans 4 роки тому +1

    Can you recommend a product we can buy in Europe?

  • @4gClearWimax
    @4gClearWimax 3 роки тому +1

    Would of helped if you used bottle cap that way we could use x amount of capfuls to use

  • @marcopratas8369
    @marcopratas8369 2 роки тому

    Very good explaination and what a great tip!

  • @stephenwhite5444
    @stephenwhite5444 3 роки тому +1

    You have any thought on the green Optimum No Rinse Wash and Wax. I'm not sure the difference between it and the blue Wash and Shine.....people use both for clay lube, washing, and detailer spray.

    • @ChromaticGarage
      @ChromaticGarage  3 роки тому +1

      The green one just has wax in it which really isn't necessary for the claying process

  • @carroll6
    @carroll6 2 роки тому

    These Canucks, they are too clever.😀

  • @mdetailing-wacz5882
    @mdetailing-wacz5882 5 років тому +1

    In Poland Ech2o is 4 times cheaper than no rinse, its awesome in many ways, also as an lubricant 1:40.

    • @ChromaticGarage
      @ChromaticGarage  5 років тому +3

      Thats crazy! Echo2 is almost 3 times the price of No Rinse in North America. Very weird how that happens country to country. I would definitely be using Echo2 if I were you as well.

    • @mdetailing-wacz5882
      @mdetailing-wacz5882 5 років тому +1

      :D

    • @mdetailing-wacz5882
      @mdetailing-wacz5882 5 років тому +1

      @Chromatic Auto Detailing but its also more concentrated, (ONR is like water) try maybe really cost less that way :)

  • @JR-rr7mx
    @JR-rr7mx 2 роки тому

    Can you use de ironised water ?

  • @vino2x497
    @vino2x497 2 роки тому

    can i do this same with Mckees n914 rinseless wash as a lubricant?

  • @yodaddy6340
    @yodaddy6340 5 років тому +2

    Thoughts of using car soap and water as a clay lube alternative?

    • @ChromaticGarage
      @ChromaticGarage  5 років тому +4

      Love it! It's a great solution if the vehicle is very lightly contaminated and requires minimal claying. Foam it down again and hit it with the clay!

    • @LacroixCruiser
      @LacroixCruiser 5 років тому +2

      Soap doesn’t provide the lubrication of Optimum No Rinse(ONR). If you’re going to be polishing after, the marring soap will cause will not be a problem.

    • @yodaddy6340
      @yodaddy6340 5 років тому +2

      Yvan Lacroix interesting! I’ve seen many use car soap and was curious if that was good alternative, guess not as many skip polishing and go straight to applying a wax/sealant

  • @jackdale9249
    @jackdale9249 Рік тому +1

    of course IF you use Bilt Hamber clay it is so pure you need no lubricant except water ! they even have their own private clay mines in UK ! it is supelative

    • @sardomnumspa
      @sardomnumspa 5 місяців тому

      Water is a solvent not a lubricant…

    • @jackdale9249
      @jackdale9249 5 місяців тому

      @@sardomnumspa IT FUNCTIONS AS A LUBE W/ THIS CLAY WORKS GREAT !

    • @sardomnumspa
      @sardomnumspa 5 місяців тому

      @@jackdale9249 still doesn’t make it a LUBRICANT…

  • @jamesdavies686
    @jamesdavies686 6 місяців тому

    I've heard some add a tiny amount of car shampoo to add to the slickness. Any truth to this?

  • @RaldasDetails
    @RaldasDetails 5 років тому +2

    That is what I do 👍🏼👍🏼 I love your videos bro 😎

    • @ChromaticGarage
      @ChromaticGarage  5 років тому

      Oh yeah! My favourite way to save money on a product. Thanks Tony!

  • @jackdale9249
    @jackdale9249 Рік тому +1

    best ever is to use Bilt Hamber clay fr UK they have their own clay mine ! avail in S , M, H grades it is so pure they say and it is TRUE ! you can use just plain water ! try it let me know what you think ? and update your video w/an addendum ? thx Jack

  • @kenalexander3046
    @kenalexander3046 3 роки тому

    Great video. Thanks so much!

  • @realgunzz4397
    @realgunzz4397 3 роки тому +1

    I see that ONR adds shine to your paint, is it okay to use this as clay lube and then polish and ceramic coat after?

  • @chaasmichael1398
    @chaasmichael1398 4 роки тому

    I have some Rinse Free wash and shine by CG, is that good to use for clay luber?

  • @jefferrrson1x
    @jefferrrson1x 8 місяців тому

    Very nice !

  • @LukaszEMwaxholic
    @LukaszEMwaxholic 5 років тому +3

    thumb up and we're watching :)

    • @walenrod17
      @walenrod17 5 років тому +1

      ;D

    • @ChromaticGarage
      @ChromaticGarage  5 років тому +2

      Thanks guys! Let me know if there is a video on any specific subject you want to see!

  • @maximolotov
    @maximolotov 3 роки тому

    This wash and shine has some sealant in it which makes things shine.
    I have been using it for claying and it did gray work, but ......
    Applying sealant/wax after this ONR wash and shine will make new sealant /wax to fail in a week or so , all cause of this sealant in ONR wash and shine and even pure IPA wipe can not kill sealant from ONR wash and shine.
    This caused me so much reputation loss :(((((((((

  • @ga8065
    @ga8065 Рік тому

    Found it on amazon in 8 oz for 9.95 in prime. They have larger, but using .5 oz....why get larger.

  • @arifhannan9543
    @arifhannan9543 2 роки тому

    can we apply this on the windshield?

    • @michaelr5606
      @michaelr5606 Рік тому

      Absolutely. I always clay glass along with paint.

  • @drivedetailedmtl
    @drivedetailedmtl 3 роки тому +1

    amazing thank you for this

  • @antonioraimondi799
    @antonioraimondi799 3 роки тому

    Is that same dilution amount sufficient for using it as detail spray?

    • @Beach_Master
      @Beach_Master 3 роки тому +2

      1:16 ratio for detail spray. So add 1oz to a 16 oz bottle or 2oz to a 32 oz bottle.

  • @1165slugman
    @1165slugman 3 роки тому

    Good info 👍

  • @billcarson3188
    @billcarson3188 2 роки тому

    Thanks!!!!

  • @denzeljackson6505
    @denzeljackson6505 Рік тому +1

    I hate the American system of volume just litres, milliliters etc like the rest of the world

  • @easycomeeasygo8901
    @easycomeeasygo8901 Рік тому

    Thank u 👍

  • @RCGJR_
    @RCGJR_ 4 роки тому

    K-Y jelly is where it’s at.

  • @JesusRuiz-ps4ot
    @JesusRuiz-ps4ot 2 роки тому

    I use distilled water on my windshield wiper reservoir

  • @brandonedwards8625
    @brandonedwards8625 Рік тому

    I know this video is 4 years old, but isn’t the cap 1/2 an ounce?

  • @Mgonzalez9937
    @Mgonzalez9937 3 роки тому +2

    The correct amount of water in your 32oz bottle should be 31.5floz of water and .5floz of water. Otherwise the dilution ration making the bottle 32.5floz. Great stuff though, I use it for many things 👍🏻 @MKDetailed

    • @billruggirello1707
      @billruggirello1707 2 роки тому

      No, if the ratio is 2oz/gal (128oz) then 128/32=4 and 2/4 =1/2 or 0.5oz. Your method is 2oz/126oz and not 128oz

  • @jetonzeqiri9553
    @jetonzeqiri9553 4 роки тому

    NO Rinse product can you use to clean the interior of the car ?

  • @RoNiminal
    @RoNiminal Рік тому

    The cap of ONR bottle is exactly 0.5 oz

  • @limited50scla
    @limited50scla 5 років тому

    I have GC clay luber, what would be a good dilution ratio? I used a 24 Oz bottle to clay the hood, fenders and 2 doors on my SUV. Yes I know that’s a lot, first time claying my Tahoe.

  • @ericguy4461
    @ericguy4461 6 місяців тому

    Hi, vry good, bisous de france

  • @mv5203
    @mv5203 4 роки тому +2

    2 Ounces of wash per 1 gallon of water. Put it in a spray bottle, shake up mixture, spray 2 foot square area and keep surface of car wet at all times when using clay.
    Saved you 6 minutes of listening to this guy tell you his life.

  • @captaindrywall
    @captaindrywall 2 роки тому +1

    ok numbskulls, there are four quarts in a gallon, a quart is 32 oz. no problem you can not measure half an oz with a measuring cup, you will notice he put a full oz in that cup. good grief

  • @aristideau5072
    @aristideau5072 3 роки тому +1

    30ml of Optimum No Rinse to one litre of water for the 95% of countries that don't use Imperial measurements

    • @ChromaticGarage
      @ChromaticGarage  3 роки тому +1

      Yeah im not sure why I did US measurements in this. Im from Canada. I piss ML's

    • @darrenhurrell
      @darrenhurrell 3 роки тому

      Isn’t it a recommended 6% dilution ratio which would be 60ml in 1 litre, or have I got that wrong ?

  • @p5tom
    @p5tom 5 років тому +2

    old or new math...oh you need some lube on that chalk board....note: I use silly putty as a clay bar alternative and bud lite as a lube....

  • @STREETFIGHTER50
    @STREETFIGHTER50 4 роки тому +2

    Wow 1/2 an oz. for a 32 oz. bottle? That’s awesome! Would it hurt to use a full oz. a bottle? 😂

    • @ChromaticGarage
      @ChromaticGarage  4 роки тому

      Haha seriously man! Its not good to overuse it!

    • @STREETFIGHTER50
      @STREETFIGHTER50 4 роки тому

      Hmmm idk if I should get this blue or the green. 😬

  • @alex9xela
    @alex9xela 2 роки тому +1

    Next: look for diy no-rinse

  • @garyvanremortel5218
    @garyvanremortel5218 2 роки тому

    Measure with calipers, mark with chalk and cut with an axe.

  • @jaysmith6013
    @jaysmith6013 4 роки тому

    Dang just half ounce product for 32oz of water?

  • @chasetiemeyer1056
    @chasetiemeyer1056 5 років тому +2

    PLEASE get a dry erase board.

    • @ChromaticGarage
      @ChromaticGarage  5 років тому

      Chase Tiemeyer I was literally about to use one but the chalk board was easier to film. I am so sorry😂😭

  • @VictorHernandez-nt3tw
    @VictorHernandez-nt3tw 5 років тому +4

    Or if you're lazy like me use the ONR cap as 0.5oz measuring cup. Lol

    • @ChromaticGarage
      @ChromaticGarage  5 років тому +3

      Haha the way more efficient way of doing things!

    • @VictorHernandez-nt3tw
      @VictorHernandez-nt3tw 5 років тому +1

      @@ChromaticGarage love your videos btw. Watch them everytime u come out with something new

    • @ChromaticGarage
      @ChromaticGarage  5 років тому +1

      Thank you man! I really appreciate that! Hopefully we'll take it up a notch once this snow is gone.

    • @srupp9271
      @srupp9271 4 роки тому

      That's what I did too. Makes it so much easier .

  • @ArjjunSingh
    @ArjjunSingh 4 роки тому +1

    It’s just not slippery enough. I use car wash soap in a water bottle

    • @pandassudsnshine4125
      @pandassudsnshine4125 3 роки тому

      People just don’t know. I use car wash soap or diluted window cleaner.

  • @LoveLikeaHurricane
    @LoveLikeaHurricane 4 роки тому

    you put in 1 oz of optimum no rinse in your 32 oz bottle

    • @bekiro28
      @bekiro28 4 роки тому

      he should throw it away and start all over again right ?

  • @f1fanatic80
    @f1fanatic80 5 років тому +1

    Instructions say 1oz optimum to 2 gallons of water, his measurement at the beginning is incorrect.

    • @Craig23McDonald
      @Craig23McDonald 5 років тому

      Your dilution is correct for the normal rinse less wash. It needs to be more concentrated for the clay lubricant

    • @jortega61924
      @jortega61924 5 років тому

      The solution is off. U add 2 oz to a 32 oz bottle. 4 divided by 2 is 2.

    • @billruggirello1707
      @billruggirello1707 2 роки тому +1

      @@jortega61924 ?? where did you get this?? If it is 2oz/gal (128oz) 32oz is 1/4 of a gal, so 1/4 of 2oz is 1/2 oz

  • @letsbuilda4ort
    @letsbuilda4ort 4 роки тому +1

    It's not cheap at all after you consider the process of dillusion, potential mistake resulting in scratches.

    • @ChromaticGarage
      @ChromaticGarage  4 роки тому

      As with anything, its still incredibly cheaper

  • @zero604
    @zero604 4 роки тому

    The 32oz bottle is like $27 CAD on Amazon, guess it went up in price.
    Edit: please don't write with that pen and board anymore...

    • @jonathanl5316
      @jonathanl5316 4 роки тому +1

      Dont buy detail products on amazon. They stole people. Way too expensive. Right now it is 31$ and you can have the same for 21 $ on carzilla ..

    • @zero604
      @zero604 4 роки тому +1

      @@jonathanl5316 Yeah I came across Carzilla too, they have a LOT of products and cheaper than anywhere else.

    • @jonathanl5316
      @jonathanl5316 4 роки тому

      Yeah and plus that I think its important to support our canadian stores. What I believe is Amazon is slowly taking all the market and what do they do then... asking insane prices for unaware people. They have become my last choice when I buy and also a good source of reviews 🤣

  • @hakman239
    @hakman239 5 років тому +1

    People use 256:1 I’d use 100:1

  • @andyfoto620
    @andyfoto620 5 років тому +6

    Ahhh like nails on a chalkboard

  • @noyb154
    @noyb154 5 років тому +5

    good tip, but you don't need 6 minutes to show people how to mix 2 ingredients in a spray bottle.

    • @tc-og7qy
      @tc-og7qy 5 років тому +2

      Gee Willickers damnnn salty!!!!

  • @captainvlog
    @captainvlog 2 роки тому

    has anyone actual tried this?

  • @dostarr
    @dostarr 2 роки тому

    Ummm, that was completely 1oz. But I agree just do a 1oz., stuff is CHEAP. Better safe than sorry...!

  • @fishkillerchris
    @fishkillerchris 3 роки тому

    That was way more than a half of an ounce

  • @simonbenn5340
    @simonbenn5340 Рік тому

    I had to laugh hellcat payment 😂. I drive an S6 with RS7 turbos making around 750 hp. I destroy a red eye hellcat or my buddies 1100hp kitty cat 🐱. It gets destroyed like always! Thanks for the tip for clay lubricant

  • @james6jewel
    @james6jewel 3 роки тому +1

    Distilled water distilled water distilled water do not use tap water

    • @ChromaticGarage
      @ChromaticGarage  3 роки тому

      It really doesn't matter much at all

    • @james6jewel
      @james6jewel 3 роки тому

      @@ChromaticGarage using tap water is bad because all the junk in the water work smart not hard. I won't use anything but distilled water.

  • @cleanedbykyle
    @cleanedbykyle 10 місяців тому

    what even is clay lubricant is it not just soap lol? like why cant i just use dawn to lube up instead like im going to wax or ceramic coat the car anyway who tf cares if i strip the outside with dawn while claying like theats actually better than just isopropyl alchohol if i dawn with clay then alchohol rub down IM GONA START DOING THAT NOW ACTUALLY DAM IM SMART

  • @1234mfc
    @1234mfc 3 роки тому +1

    Why do Americans use Oz and Gallons they have to be different. No one uses that shit these days.

    • @ChromaticGarage
      @ChromaticGarage  3 роки тому

      Yeah I am Canadian we dont either. I just did this because the audience is mostly American

    • @saygoodbyetoprivacy
      @saygoodbyetoprivacy 3 роки тому

      We do it because we don't want to be like you.

    • @billruggirello1707
      @billruggirello1707 2 роки тому

      @@saygoodbyetoprivacy I don't want to be like anyone, but metric is way easier than Imperial (American) units. You should try it. OH, that's right, you are using it every day when you count your money. Isn't that easier than £s and Shillings?

    • @saygoodbyetoprivacy
      @saygoodbyetoprivacy 2 роки тому

      @@billruggirello1707 It makes you angry, doesn't it.

    • @billruggirello3081
      @billruggirello3081 2 роки тому

      @@saygoodbyetoprivacy couldn't care less about ignorant people. It is easy, I use it as much as I can. Inches just suck, and feet stink, and yards are dirty.

  • @dostarr
    @dostarr 2 роки тому

    Ummm, that was completely 1oz. But I agree just do a 1oz., stuff is CHEAP. Better safe than sorry...!