Ruger American Ranch Gen 2 in 300 Blackout - Unboxing and First Shots
Вставка
- Опубліковано 9 лют 2025
- The overall fit and finish of the rifle was nice out of the box. The problems began when I tried to shoot it for the first time. I mainly use CCI #41 primers for my reloads as they are military spec primers. I was getting light primer strikes and misfires in some of these rounds. Additionally, some of my other magazines would wobble in the mag well and lead to poor feeding or jams. I will definitely have to check the bolt over and try some different ammo. All my reloads were with RCBS small base dies and loaded on a Dillon 550. I have never experienced any problems in my other rifles. Stay tuned for further testing and evaluation.
Thanks for Watching.
**All shooting done on Safe and Private Range**
I hate to point out the obvious but CCI #41 primers are milspec primers meant for preventing slam fires in AR platforms. They require a harder strike to set off. So essentially you’re not getting light primer strikes, you just put in a primer that requires a harder strike than the rifle was designed to give. Use regular small rifle primers and you won’t have a problem.
Well, I have used CCI #41 for over 15 years in reloading 300blk for AR's. I just think that is unfortunate that I cannot use the same ammo in all my rifles.
Been waiting 6 months for my ruger American pretador from turners outdoorsman
Sweet Interesting Thanks for sharing.✌🏻
Also check your chamber depth. It's really helpful to know were you can move the bullet in the case . This helps with accuracy
I've owned 5 ruger carbines. The only one I had a problem with was feeding issues in the pc40. Even my old mini 14 is reliable and accurate. I'm really liking my ranch rifle in 300blk. Gen 1 and holds the same 50yd zero with 3 types of hunting ammo.
I have had a few Ruger Americans and they have all been VERY ammo specific. I mean from 1/2" groups to 4" groups and not much in-between. I just bought the Gen 2 classis in 223 and it was the same. I've been told by some shooters that pulling the muzzle brake off made all the difference. I haven't tried that because I finally found ammo it likes. Shoots 1/2" to 5/8" groups now.
I'm sure your reloading is excellent but I would suggest trying a few factory ammo brands. I did have a gen 1 in 308 that never would group with anything.
Thanks for the comment. Yes, very ammo specific for sure. They definitely don’t like military primers. I have been using a suppressor on mine and it didn’t make much difference.
I had a Ruger Ranch rifle in 300 Blackout once and also experienced light primer strikes. Didn’t seem to matter what ammo I used. Sent it back to Ruger and they replaced the bolt, but I still had occasional light primer strikes. Accuracy was NOT good and was generally disappointed. Have never been happy with Rugers and since gotten rid of that Ruger Ranch rifle. Stick with an AR if you like 300 Blackout.
Im very glad I watched this before jumping on the gen 2 ranch. I had a gen 1 ranch that I liked a lot at first, then the light primer strikes began happening and I lost faith in the firearm and traded it away. Im going to hop on the howa mini barreled action instead..
Glad that I saved you from disappointment. It has only happened with reloads using CCI #41's. I have shot many rounds since with no problems, but you never know and it could happen at the worst possible time. It definitely makes you lose confidence in the firearm. Thanks for the comment.
Thank You Sir! The Magpul 300 Blk mag jammed? Then the regular Magpul worked better. 🤷👍🇺🇲
The longer magazines didn’t work great. They wobbled too much. Thanks
Morning beautiful rifle but the mag issue and light primer strikes it’s not too convincing I was thinking in a 400 legend may have to go with savage thanks for sharing
Interesting. I've never had a light strike or a mag issue. Although I hear the rotary mags are problematic.
If you're shooting subs out of pmags, file the internal ribs down by half.
My friend has a Ruger American Ranch that I reload ammo for him. (Not the Gen 2 like yours) He was having light primer strikes as well. The ammo I load has always worked flawlessly in my 300 Blackout ARs. I do not have a bolt rifle. Doing a search, I found it was a common problem due to a wee bit of extra headspace on the Ruger rifles. I bought an extra set of dies and have them adjusted out so they don't bump the shoulder back as much and that solved the problem. It seems the issue was never corrected by Ruger based on your experience...assuming it is the same problem. I also use Lancer 300 Blackout magazines. The Magpul that came with his did not work well. I gave him a Lancer 10 round 300 Blackout magazine, and it functions in the rifle with no problem. He only shoots subsonics and pretty much hunts with Hornady Sub-X 190 grain. It is an accurate bullet. 300 Blackout can definitely be a picky round to work with.
Ruger said that I could sent it back, but I really think it was mainly the relaods that I was using. I reloaded them with RCBS small base dies and CCI#41 primers. They work great in my AR's but not in this rifle. I reloaded some with regular dies and used other SRP and they all shot great. I am trying other magazines, but most just have a little too much wobble in them when seated. I just made a video with the Sub X 190gr and they shot and performed awesome in this rifle. Thanks for the comment.
@@kyfirearms Glad to hear you're getting it all sorted out.
I have the first Gen and it shoots good all the way to 245gr but wish it took AR mags. Make sure the front of the stock doesn’t touch the barrel when you squeeze it , I floated and filled mine so pressure from a bi pod won’t effect it . Light strikes could be as simple as shoulder but I’m sure you have a case gauge. I heard some get light strikes and there might be a fix for that. BUMMER about feeding , they have a stupid shoulder around the chamber and thought that was a rotary mag thing and I had to wind mine to kick some rounds up. I’m sure there help out there . 🤷♀️ keep us posted and I’m sure you know you are at a crossroads of sending it in or modding and voiding warranty. 🤭
I use small base dies and thought maybe the chamber on this gun is bigger. The longer magazines would wobble back and forth too much and caused feeding problems. I tried taking the bolt apart to look at the firing pin, but it doesn’t look straight forward and there are no instructions in the manual. I sent an email to Ruger about the problems. Thanks, as always I appreciate your comments.
A Nice Look at the Ruger Ranch 300BO I have always used the 41 primers in my .223 Ar platform reloads but not any of my other ammo loading. I had always heard they were harder than the standard small rifle primers so i kept them for the Ar loads. I am curious if all other primers worked fine in it. Maybe Ruger needs to improve their firing pin or spring. I hope it works out well. It looks like a nice rifle otherwise. It is one I have thought about purchasing as well. It should be a great one for your can. Maybe pick up a box or 2 of factory stuff and see if its just as bad before calling Ruger. I would think Ruger should help you get this resolved. They surely should be testing for things like light primer strikes and 41primers, but these days one can never tell. hopefully it works out. Paul
It has worked with other SRP that I have tried. S&B and Fiocchi work fine and the rifle can be accurate with the right load. I have contacted Ruger about it and they offered for me to send the rifle in to be looked at. I am not sure if I will send it back. I guess the 41's are just too hard to work in this gun. Thanks for the comment.
Try this, use aa1680 powder, 150 gr sst made by Hornady. With a Remington small rifle primer. My Ruger gen 1 love nosler 165 gr ballistic tips. Use the 1680 powder. It works well. Keep your bullet weight in the middle of the road
Awesome. Thanks for the comment.👍
Something funny...
I left and came back and my first comments are gone but my third is now posted twice??
In only see this comment on my end. 🤷🤔
I went indepth to reasons and cures. What I found with mine...
Very annoying Having them deleted.
U tube getting strange these days it seems to me as well CW
👍
Thanks
That stinks man. My gen 1 in 300blk is great. Ruger is a good company, they should make it right.
Yes, they are a good company and offered to check it out for me. Thanks👍