*I caught this guy on my 3rd cast. Paired with these 4" trailers. **enjoyable.fishing** recommend slightly modified, I think i trimmed about 3/4 of an inch off of it. Its deadly!*
Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit ua-cam.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
you can if you try..in my experience with the traditional eyes they will eventually come off from time to time during extended use..doing it this way with softer plastic should help that.
Have watched this video many times, just getting into the bait making for personal use. Just rcvd my new eyeball mold from Jason. Also rcvd a modified 4" DR swimbait mold. Instead of the injection ports on the side , I had him put the ports on the top of each bait so doing 2 color laminates will be much easier. Thanks again for all the great info
I'm going to have to think long and hard before purchasing this! Oh wait...there is my shipping conformation. That is a crazy cool idea and so glad I seen this video tonight. You are a great salesman for this company. As soon as I seen the title I knew I was buying it. Love the pre-made eyes but to be able to make them yourself is a game changer!
Love the new mold. To pour a solid color eye in one pour. All you need is solid a backing plate. That way you can save time and plastic. I think that would be a good option to include with the mold or a separate purchase item. Really enjoy the videos. Tight lines.
Wow! Incredible idea! That is a really awesome mold. It's a real privilege to see such genius at work. Stay on the gas pedal my friend, you are on your way to a million subscribers! Stay safe Makin baits
That's sick! I can't wait to see the final product with a dual injection. Could you do a bloodline with a skin pour? I'm assuming yes but youd probably have to do a little bit of a heating process to get it to bond better. I really want to try and combine all those techniques into a bait
Show...the best...muito bom...vamis trazer essa tecnologia parao Brasil....👋👋👋congratulations...Marcelo João....Brasil...Rio Grande do Sul....Canoas City...like
Hey Chris, early on I was having trouble with the eyes shifting in the mold when shooting. I then strated using a tiny dab of vasaline in the eye socket and that helped keep the eyes in place. Every once in a while I will run into a bonding issue between the eye and the bait. I am wondering if its the vasaline causing that or not enough temperature. I shoot the bait pretty hot.......thaanks for your input.
i seen these eye mold i think it great a guy took the time to come up with this very simple way of making eyes..but selling them might be a patient an you loose everything you ever worked for if they do have patient on eyes
This is fantastic, posted just a few minutes after I made another large discounted order. Time to go back and purchase more stuff “5 inch open pour hint”
@@WorldsWorstFishing I thought that the Little Hammer spru flip was clever (and it is lol) but this eye solution must have been a Eureka moment for sure.
Be sure to check out the safety tips on using this mold properly starting at 23:12. What an awesome creation this mold is!
The mold design is ingenious, I expect there will be some awesome eye combos in the future !! Sick vid !
Bet now that the mold is figured out it wouldn't be too difficult to do different shaped pupil plates
There needs to be a mold with a variety of eye sizes to make it more practical than buying every size individually. Awesome mold man, love the videos
his mold is absulutley genius
*I caught this guy on my 3rd cast. Paired with these 4" trailers. **enjoyable.fishing** recommend slightly modified, I think i trimmed about 3/4 of an inch off of it. Its deadly!*
Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit ua-cam.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
Triple injection eye ball? I think they would look very cool
Was thinking will it laminate but you sir pulled out the triple idea. Hats off 👏
@@40s9s3 c block eyes with the dip your car colors? Interesting.
That is an engineering marvel. Wow. Super cool. Would love to see the adhesion to the swim bait body if you could “peel” the eye away
you can if you try..in my experience with the traditional eyes they will eventually come off from time to time during extended use..doing it this way with softer plastic should help that.
I wonder how a large hand pour swimbait would look with a bunch of suspended eyes in it. Not natural but possibly interesting.
You would have to be careful not to melt the eye balls with pouting hot plastic
Have watched this video many times, just getting into the bait making for personal use. Just rcvd my new eyeball mold from Jason. Also rcvd a modified 4" DR swimbait mold. Instead of the injection ports on the side , I had him put the ports on the top of each bait so doing 2 color laminates will be much easier. Thanks again for all the great info
Great mold and awesome demonstration Chris. Time to spend some more money lol. Angling Ai for the win, yet again. 🙌🏾🙌🏾🙌🏾
Thanks 👍 it is an awesome tool to have!
I am so impressed by that mold. Seriously, that is _genius!_ Thanks for sharing!
That is an amazing mold. Hats off to the engineering y’all came up with. Can’t wait to see future videos with this.
Awesome job again Chris. The whole shop just sat down and watched your video. We all can't thank you enough!!!!
hope all enjoyed!
Angling Al Do you think with a drill press and a ball bit we could modify other molds by our selves?
@@ZZ430T56 Not without a way to secure the mold and mechanically move the plate. Without that, it will jump on you and be a little unsafe.
This is an insane mold!! These Angling A.I. folks are on a whole other level. Great demonstration video!
Much appreciated!
Este molde es el más increíble que he visto, gracias por compartir. This mold is incredible, thanks 4 sharing
Amazing how they came up with the idea BRAVO.
I have never made my own lures before somewhat new to fishing but this is awesome. I need it.
As my kids used to say Awesome Sauce, great work Josh and Chris. You guys continue to push the envelope on this hobby/business.
We try haha
I'm going to have to think long and hard before purchasing this! Oh wait...there is my shipping conformation. That is a crazy cool idea and so glad I seen this video tonight. You are a great salesman for this company. As soon as I seen the title I knew I was buying it. Love the pre-made eyes but to be able to make them yourself is a game changer!
Hope you like it!
Love the new mold. To pour a solid color eye in one pour. All you need is solid a backing plate. That way you can save time and plastic. I think that would be a good option to include with the mold or a separate purchase item. Really enjoy the videos. Tight lines.
We discussed that idea of a solid plate yesterday, might be something he will test
Awesome mold, I have been using it since it came out. Thanks for the video.
🙏🙏
Wow, now I gotta have one!! Thanks for the video on this!!
absolutely brillant..anglingai are killing it well done guys
👍👍
This content gets better and better every video...killin it Chris!
thanks!!!!
Genius idea. Love the channel and all of Josh's creations. Amazing
Glad you like them!
Super stuff can’t wait to see what he comes up next 👍
we have some other "wild" ideas in development
Awesome video chris! Thanks for sharing! Love watching your videos!
🙌🙌
You also can add these to any bait with Mend-it or a lighter/soldering iron. No clear dip required
absolutely
awesome mold will have to add these to the list
Go for it!
That eye mold is slick👌🏻
*Gets ready to see some cool custom eye work*
Can't wait!
Looks like a great addition to the collection.
Very!
Very nice! Thanks for the video. Always learning something new each day. Un abrazo from Cartagena, Colombia.
Thanks for watching
Good video I like how you showed the product I can use this eye mold for fly tying there are a wide variety of fly's that you add eyes thank you.
🙏🙏
Wow! Incredible idea! That is a really awesome mold. It's a real privilege to see such genius at work. Stay on the gas pedal my friend, you are on your way to a million subscribers! Stay safe Makin baits
That's the plan!
Thank you for the amazing content. Its helping out big time!!!
Dang man, that is absolutely fantastic. You guys did an awesome job.
🙌
You could use the eye mold to make shad spots too. Just use the solid eye. Great mold and great video
What a cool mold. Josh really put some time in that for sure. #killingthemoldgame💥💥💥
Great collaboration on a super idea
Very Cool. Black pupil with Red and or red/orange Iris. . Killer color for bream. The solid eye would be great for making a spot tail minnow or Shad.
That's sick! I can't wait to see the final product with a dual injection. Could you do a bloodline with a skin pour? I'm assuming yes but youd probably have to do a little bit of a heating process to get it to bond better. I really want to try and combine all those techniques into a bait
I stopped paying attention in history class to watch this😂
haha dont fail the class
World's Worst Fishing we can use our phones in it cause he knows the remote learners do so🤷🏻♂️🤣
@@frogassassin1587 hate to say it. My son does the same thing.
Love all the molds you get!
Me too!
I absolutely love your videos keep it going
Thank you so much!
Chris that eye mold is super cool and those swim baits are a winner. 👍
Thanks 👍
fire. awesome idea!
You guys always seem to have another trick up your sleeve. AWESOME! 👍🍺🎣
I think that's the coolest thing I have ever seen!! WOW
🙌
Well Fluid dynamics CNC work What a great mold gonna be cool You will be able to do a lot of Bait
I found it. Thanks for the info.
I like it! It will go on the wish list.
What a sweet mold! Guy who made it is a genius
yeah he said the solution hit him one night
Now this is a really neat mold idea.
It's sweet
Awesome vid man
Love that eye mold!
The eyeball mold is wicked!
Indeed
Great job, Love it!!
Thanks so much!
Amazing.. Can't wait to buy one.
Hope you enjoy it!
unreal. they look great.
thanks
very creative how they come up with it
Pretty dang slick
Really cool videos! Makes me say “ohhh so that’s how they do it”
That’s some forward thinking for sure!!
yeah he did the impossible
HELL YEAH 1000000000000000000000% GENIUS JOSH DOES IT AGAIN!!!! -DROWNINGLURES
he's insane!! in a good way
@@WorldsWorstFishing dude they came out so nice 👌
@@anthonydunn9414 👍👍
Show...the best...muito bom...vamis trazer essa tecnologia parao Brasil....👋👋👋congratulations...Marcelo João....Brasil...Rio Grande do Sul....Canoas City...like
Can’t wait for more videos absolutely awesome
Thanks
Hey Chris, early on I was having trouble with the eyes shifting in the mold when shooting. I then strated using a tiny dab of vasaline in the eye socket and that helped keep the eyes in place. Every once in a while I will run into a bonding issue between the eye and the bait. I am wondering if its the vasaline causing that or not enough temperature. I shoot the bait pretty hot.......thaanks for your input.
Brilliant!
Can you use a C block or blending block with them? This is an exciting new mold!
Hey man awesome looking baits school can wait because I’m watching this
FREAKING GENIUS
yep
Man that’s an awesome mold 🤘🤘🤘
It sure is!
Well dang it I just put in a big order Tuesday at A.I. Now I gotta have this as well lol.
i seen these eye mold i think it great a guy took the time to come up with this very simple way of making eyes..but selling them might be a patient an you loose everything you ever worked for if they do have patient on eyes
I like bait plastics the best. The ultra clear is awesome and free shipping. I know your sponsored, but it’s good stuff
bait* plastics...very good plastic.
Great video & innovation!
Glad you liked it!
Amazing!
ok i am impressed...
The 1 person who dissed liked this as to be hater. Another BANGER video keep killing it
This is fantastic, posted just a few minutes after I made another large discounted order. Time to go back and purchase more stuff “5 inch open pour hint”
haha
someone had a great idea with this mold
Es una idea genial.me gustaría saber dónde consigues esos moldes.
You `should make some videos where you fish with your baits.
def hope to soon
Man never fishes, just makes baits😂
@@kolbybaker1924 my fishing is......about par lol
Pretty damn slick!
Yup thats dope
yessir
You should try a swirl or something like that . Loved the video keep it up 👍
Thanks for the idea!
That’s pretty cool. You could probably put a hook in the string of eyes and catch a fish with it.
those eyes are amazing! how about a spotted gar swim bait?
Excellent work. Do you have a favorite bluegill mold?
Awesome design wish i had all yhat stuff. Id make baits all day
Well that's just bloody genius!
Yep!
@@WorldsWorstFishing I thought that the Little Hammer spru flip was clever (and it is lol) but this eye solution must have been a Eureka moment for sure.
Thanks for the video. I have the 4 inch blood line mold and th 4 inch hand pour thes eyes will fit them right?. Thanks Mr.jones
Yes
Just made my day
That is a cool mold
Very nice . I see some kick ass swimbaits in the near future.
always!!
awesome video as always. What if they made a solid plate for one color eyes so the plastic can't get out
we discussed that...might be in thw works
I would like to see it on your other baits
Game changer
I will be using this for an ice fishing bait
there ya go
What spray adhesive are you using for the eyes? Mine vasaline idea works ok but i believe the adhesive might work better
I've spent $100s on eyes, this is will be a great buy. Getting it now
its so fun too
@@WorldsWorstFishing Do you still use loctite for the eyes?
Awesome