LS4 first start with DT headers

Поділитися
Вставка
  • Опубліковано 13 вер 2024

КОМЕНТАРІ • 17

  • @ThaUnknownOne
    @ThaUnknownOne 11 років тому

    Thanks for the info. I am running stock mostly on my GXP, but my stock muffler has a hole in it and needs to be replaced. I like the sound of your car and I can see from the videos you have done a LOT of extensive work. Do you think your exhaust would sound good on a stock GXP as a daily driver. Is it loud in the car? And how about the "helicopter" sound when DoD kicks in?

  • @1997L67GTP
    @1997L67GTP  11 років тому

    DT headers no cat, full 3 iinch to the back 1 36' cherry bomb for the resonator and a 2.5 inch rear cherry bombs as mufflers

    • @deanmalinko4713
      @deanmalinko4713 6 років тому

      GXPLS4 are you still running the dod or a delete kit? I'm stuck right now have everything same looks like, I've done head work and 1.82 rockers. Headers,zzp downpipe,ls7 mass air, ls2 throttle body. Would really appreciate your input.thanks

    • @deanmalinko4713
      @deanmalinko4713 6 років тому

      I have the speedmaster intake but Will not bolt up because of valley cover, wandering what you done about problem?? Thanks

  • @1997L67GTP
    @1997L67GTP  11 років тому

    absolutley cut out the stock mufflers the cherry bombs will be slightly deeper in sound but will sound great, you wont regret it. i would also highly recomend getting a downpipe as well.

  • @foxjunkie3013
    @foxjunkie3013 8 років тому +1

    Where do u get your parts from bro. Hard to find ls4 parts

  • @ThaUnknownOne
    @ThaUnknownOne 11 років тому

    Any suggestions on where to get the downpipe? I areally appreciate your
    help on this too. I looked at your thread in Grand Prix forum dot com as well.

  • @ThaUnknownOne
    @ThaUnknownOne 11 років тому

    Alright. I will be purchasing that from you. My hours are cut back so give me a week or so. So here is last nights issue. I went to AutoZone and O'Reilleys. Neither suggest or can tell me which cherry bombs to buy. They have NO CLUE. So they told me to ask for part numbers, or to cut my mufflers off and bring them to them so they can match what I had. Smh... I gave them the measurements you gave me in the beginning and they had no clue...

  • @1997L67GTP
    @1997L67GTP  11 років тому

    i have one for sale 80shipped but its catless. so youd have to have yours welded on to it. otherwise ZZPerformance are the only ones who sell them

  • @andersonstewart8362
    @andersonstewart8362 5 років тому

    Im just curious does the zzp performance downpipe bolt up to these headers

    • @nikkonich7285
      @nikkonich7285 4 роки тому +1

      Headers basically have a built in downpipe so know they will not bolt up

  • @anthoneysmith3436
    @anthoneysmith3436 5 років тому

    What all mods do u have and is that a typhoon intake

  • @redthebarber6107
    @redthebarber6107 7 років тому

    May I ask where your purchased your top motor mount?

    • @deanmalinko4713
      @deanmalinko4713 6 років тому

      Red H. It's a zzp upper billet mount about 90.00

  • @davidleib5565
    @davidleib5565 8 років тому

    what intake manifold are you running

  • @ThaUnknownOne
    @ThaUnknownOne 11 років тому

    What kind of exhaust are you using?

  • @davidleib5565
    @davidleib5565 8 років тому

    what intake manifold are you running