Maverick 88 High Capacity Magazine Tube Installation
Вставка
- Опубліковано 14 жов 2024
- Today we install the High Capacity Kit from Brownells on the Mossberg Maverick 88. The kit is listed for a Mossberg 500 but is completely interchangeable with the Maverick 88.
This is the only video that I've seen that shows how to heat the tube for removal! Thanks
Nice Video showing how to apply heat to remove a Mossberg 88 Magazine Tube,
Thanks for the Video.
For those commenting that all you have to do is Just unscrew the Magazine tube you have obviously
Never removed a Magazine tube that has Red Loctite on it from the Factory on the threads !
This guy did what he needed to do to remove the Magazine with the Red Loctite on it.
Not all Mossbergs have Red Loctite on it but if it does you wont just casually reach up and twist it off.
Suggest you save this page when you do get one that has the Red Loctite on it when you find that it doesn,t screw off easily it may keep you from destroying your magazine tube .
Nice to be able to clean out the Magazine tube from surface rust inside the Magazine or change a Magazine spring or follower for maintenance.
a word of cautionary advice, set the receiver deeper into the jig, flush with the fore face, to avoid twisting the receiver. Great video and thorough coverage.
Thank you!
Well I didn't watch the video but I don't need to and I have no clue what you're talking about about worrying about twisting the receiver that stuff just basically falls apart once you take that screw loose on the end of the magazine tube so what are you talking about? you don't even need to put it in a vise ive done it 50 times literally on my lap.
@@jimjones395u just screwe the tube right off?
awesome tutorial! loved the idea of the 2x4 vise grip.
Thank you! Glad you enjoyed it.
@@radiofreenewhampshire644 From Rochester and work in Alton. I found that working the slide release was kinda a pain with that ATI stock on. Then i found Shoten armory extended slide release. Best 50$ I've spent for my build.
@@stevejackson9952 thanks for the information! I’ve contacted Shoten to find out where I can order one for myself!
The Maverick 88 comes in many configurations. Just order the one you want and you won't have to do this. The result in this vid is their #31046. 7+1 12ga 20" barrel.
I thought the same thing. Lol
Much less $$ too, but the build is fun and for people who are doing it in stages. It started when my brother bought the basic version of the gun and we looked into the mods that were available.
It is a helpful video for people buying it used.
I would if those were still available.. can’t find them anywhere
It's expensive to buy all these parts and do it yourself, but it's fun and I enjoy it because I get to learn a lot about this kind of stuff and it comes with a bit of pride when you take it to the range and people are like "wow where'd you get that?", and you can tell them that you built it.
Great presentation with important info. Thx
Thank you!
Good podcast! Im always learning something new.
Do you have a link so I can get the same item
Very nice presentation. I have the confidence to do this. Thank you.
Great video. Is there a reason you didn't reapply locktite when you reassembled with the replacement tube and barrel?
No reason at all - good advice!
because he didn't know if it would work. I've been searching for this since I bought it on 02.07.2009
It is NOT going to unscrew by itself, and you will be able to clean the tube, replace or clean the spring and replace the follower easily whenever you are cleaniing the gun without using a blowtorch every time.
Instead of heat use fingernail polish remover to loosen the lock-tite. Clean the threads and re-apply blue lock-tite on the threads upon re-assembly. YMMV.
How will you get it on the threads when it's already made up stupid?
Hilarious
@@Z3R0NU11 WTF??
I assume it is an 8 shot magazine tube if you load 2 3/4” shells. I would also recommend a bbl/buffer tube reinforcement brace.
Thank you for the video it was very helpful and I subscribed. I was hoping someone could answer a simple question. I have two magazines springs one is for my Maverick 88 security version which holds seven rounds and the other is for my normal Maverick 88 that holds five rounds but I don't know what the difference is as the two springs look almost identical length wise. Any pictures with worded details would be much appreciated or any advice. Thnx
Hard to find videos on extended maverick 88 magazines
I found that to be true too! That’s why I figured I’d make one. 😂
I lucked out and bought mine at a pawn shop and it already had the 20” barrel and 7 round mag tube
That’s awesome - they make several variations.
Great video. Have a question, just picked up a new Maverick 88 and wanted to change the barrel. Do you need to replace the stock magazine tube if you're adding a 18.5 barrel??
Nope, just remove the field bbl. and install and any other Mossberg 500 specific bbl. drops right in.
@@wespeacock793 Awesome, Thank You for your reply!
@@wespeacock793 Just had to look up what “bbl” means. Apparently you were too lazy to type ‘barrel’ so you used an abbreviation that doesn’t even make sense. Great work.
@@wespeacock793 Brazilian Butt Lift is the most commonly used acronym BBL. FYI. TMI? LMK.
@@timobrien2738 Dumbass! Screw you Tim, ever seen ad's in newspapers or Shotgun news? Guess I forgot the "period": "Bbl."
I don't want to replace my barrel! I just want an extension tube for my 18" barrel.
Can't. The takedown screw location won't let you.
Great video! New sub here, what training rounds do you have?
Thanks for the video! I’m behind enemy lines in CA!!! Send help!
😂keep your head down and your powder dry!
I've been searching for a light rail or a light mounted in the pump grip. No such luck. I also want to keep my short 18.75 barrel and the light in the pump grip would be great. Mag extensions are also needed not to exceed the length of the barrel. Even if it gives no more than one or more shots. One shot can save your life. Do you have any info? I already have a Kick Lite stock and Blue force gear 3 position sling on it and a side saddle. I think by me adding those you know I'm serious!. I wanna complete this build I've had this since 02.07.2009. Time for an upgrade with the planet going to hell! I want every advantage to defend my home and family!!!!!!
Why did you keep hitting that little switch right by the safety every time you pumped the shotgun ??
To allow the slide to move without dry-firing
Where can I. Find that stock. Thanks for a good review. Subbbed
Awesome
Thank you - it means a lot.
If I would have watched this video. would have saved me about 5 hours of trouble lol thank you
will the spring actually work? I just want spares so I can keep my shotty loaded at all times at the cap.
Excellent video!
Where can I order this kit from and also the stock? Please
Way to make something easy a lot harder than it needed to be
How so?
Will someone please post a link to the Maverick 88 High Capacity Magazine Tube kit?
Does it line up with a 28 inch barrell
3:10 "make sure the bolt assembly is to the rear before installing"
3 hours I've been searching online to find the answer to my problem. It doesn't have to be to the rear for removal and the owner's manual does not mention anything about barrel installation, only removal.
I hope that was the help you needed! Thank you for watching.
@@nyager2 yeah it was I took the barrel off my 88 in order to put on the longer one that comes with the gun and I couldn't get it back on and I thought I was missing something didn't know it would be so simple
What is the folding stock that you have installed and where can I buy it?
Hi Brogan - that’s an ATI brand folding stock. I believe that they’re out of Wisconsin. You can find their products on their website www.atioutdoors.com/product-category/shotguns/maverick/maverick-88-12-gauge/
Check out my video on the installation at ua-cam.com/video/zLglTsTanBk/v-deo.html
ATI also makes the Scorpion Grip for the AR-15 which I have on my AR and highly recommend, especially if you have any problems with your dominant hand.
Nice video
Sadly this cost more than just buying a 20" maverick 88..
Absolutely - much more 😂
My thoughts exactly
EXCELLANT!
I wonder what the max damage would be if I put this 20" tube under an 18.5" barrel..
He says the lugs don't match up between the extended tube and the 18.5 barrel.
I have a Maverick 88 with an 18.5" barrel, do I need to get another barrel so I can install a high capacity tube? mine is 6+1 right now. I want both my barrel and tube to match in length.
I believe so - you would need the stud to be in the correct place to secure the increased capacity magazine tube.
It would be cheaper to buy a 20" 88
@@diz7366 i have a 26'' 88 that hold's 5 plus 1 would mine be fine?
Was this the 20 gauge or 12 gauge
If holds 8 2-3/4” rounds and 7 3” rounds
Great video
do you think this kit works for one chambered in 20 ga?
You would definitely need a kit specific to the 20 gauge as the magazine tube and barrel would be specific to the gauge of the firearm.
What forend is that?
We’re the test shells 3 inch?
I checked - they measure about 2.5”. The magazine should hold seven 3” shells but I haven’t tried it personally.
@@radiofreenewhampshire644 then go down to 2 3/4 and you will hold 8 + 1 hell that's a lot of firepower!!! Only and idiot would run 3 inch shells in their home defense shotgun!!! Managed recoil 00 buck with 8 pellets at 1200 fps is plenty and in the space of my home I'd rather have 8 + 1 of those then 7 + 1 of the 3 inch and they're better for control and faster follow up shots while still being very powerful!!!
Great video, for 2 extra rounds I think I’ll pass on this.
Just fun projects
I was wanting this kit but with $300 for it it cost more than I payed for the gun
It’s a little over $200 at Brownells - they have great coupons from time to time that could get it below $200 if you follow them. No affiliation- just found them to be a solid vendor. www.brownells.com/shotgun-parts/magazine-tube-parts/magazine-tube-extensions/500-high-capacity-shotgun-kit-w-rifle-sights-8-rds-prod25124.aspx
Radio Free New Hampshire thanks sir
All that work for only 2 extra shells. Im good. I need a 10 round extension. Lol
Custom work in your future?
What brand (Orange) dummy rounds are you using?
Why not just buy a 20in 88 version and have 2 guns.
Absolutely more economical especially right now!
How much?
The heat won’t damage the aluminum receiver or threads?
No.
I didn't need to heat mine just a vice block and turn.
Well that's stupid for what he paid for the gun the hardware and the new barrel and mag extension he could have just bought a Mossberg 500 20 inch with 8 shot magazine I mean it's just stupid to do that
😂😂I’m not advocating that this is the best path financially, but if you have a longer barreled version and wish to convert it, this is how to do it.
Much cheaper to just buy another Maverick 88 in a different configuration.
bro your shotgun looks crooked xD
Terrible design.
Barrel must match tube,
Tube must match barrel.
I was given an 88 with no barrel.
Thinking of cutting it in half and chukkin it. All my 870's were super simple to mod and all function flawless.
The guy below wrote that it would be easier to just find the model and capacity you want and buy it.
Facts.
Enjoy your day my people!🇺🇸
Send it to me 😂😂