Boss BCB-60 Board and BD2 Waza Craft - Unbox, Assemble, Play
Вставка
- Опубліковано 10 вер 2024
- This is a video that has it all... an unboxing, coffee, a REALLY quick pedal board build and a quick test of the BD2 Waza Craft Overdrive!
Here are links to Thomann in case you want to buy anything...
Boss BCB-60 Pedal Board
www.thomann.de/...
Boss BD-2w
www.thomann.de/...
Boss RV6 Reverb
www.thomann.de/...
KHDK Ghoul Screamer
www.thomann.de/...
Mad Professor Simble
www.thomann.de/...
TC Viscous Vibe
www.thomann.de/...
Strymon DIG
www.thomann.de/...
Hughes & Kettner Deluxe 20
www.thomann.de/...
Ibanez RG7 Multiscale
www.thomann.de/...
Gear from this video Ibanez - imp.i114863.ne...
Here is tons of stuff I use in my videos...
imp.i114863.ne...
Current LIMITED TIME deals:
imp.i114863.ne...
a buddy of mine has been looking for ideas for a simple board. We discussed one with the es-5, but this may be just what he needs, for simplicity sake. Thanks HP!
i helped a friend of mine to assemble one of these a while ago and he is very happy with the board and yes it was very easy to set it up :)
It looks really neat and organized. The cable strip was a good idea to not make it look all messy and "cably" (Kabelsalat!). And it's stereo out. The BCB-60 is a good compromise for the "beginner" as you point out. Some players and/or DIY enthusiasts appreciate more freedom in the pedal layout, power supply and other options
14:45 of you want to know how to put some pedals in front of the amp and some in the FX Loop!
this was my first board ten years ago, brings back memories!
I had a pedalboard nostalgia and decided to order a bunch of boss pedals and the bcb60. I would have to say that it's really clever regarding using it for 4CM.
I'm glad the trusty unboxing knife is back ;-)
9:50 WHAT WE NEED IS A MONTAGE!!!! WOOOOAAAHHHHH MONTAGE!!!!!
I've owned a bcb60 for many a year, and it is still going strong.
The rubber feet are ok but do fall off after time and if not replaced this can be a bit slippy on certain surfaces.
I have a BCB 60 and I like it alot, doesn't look too pretty, and it's a little bit limited on space, but I covered the board in velcro so I have more room and it's perfect.
I would have added a small tuner though BUT, for what it costs I would go on a different route. Harley Benton SpaceShip 40, Harley Benton Powerplant Junior (which is isolated!) and like 10 pro snake patch cables. Total of €120 which is still cheaper than the BOSS and you have; a bigger board, isolated power and don't have to topmount everything ! Just my two cents here Henning ;)
I've got a strymon bluesky on here
Is that safe? According to boss this thing has 1000 mili amp power supply. And according to strymon their pedal needs 250. The rest of my pedals are very low power draw so I should be way under the 1000 limit of the boss power supply.
But I wanted some community feed back
Thanks guys!
The shimmer on that Rv-6 is so so cool. will probably continue using my pedal board that i custom made :P
Did you ever get it set up using the fx loop using the patch bay? I'm messing around with mine right now to do that and there is no obvious way to set it up... other than direct to the pedals...
I read a review of another power supply and the guy said to get rid of hum, just open the pedal battery compartments and use electrical tape to tape up the battery leads. Has anyone tried that?
Looks like a neat little board for a simple board.
What im looking for is how to rout the cables if you use a effects loop..
Actually not that interested by the pedal board... but seeing the viscous vibe made me look at your three months video about this one. Freaking cool.
hi I'd like to know if can I run the earthquaker avalanche run on the bcb60 pedal board?
The top two slots of the BCB-60 are meant to house a TU-12 or a TU-80 ... or both, I guess.
Sure, you can use them for anything else but it's a Boss board. It makes sense for them to accommodate their own gear.
Waza Craft has kind of saved Boss in my mind, they're really nice.
Also, the BBE Supa Charger, while not perfect, is an isolated power supply and can be found for less than $100
Hey! what's in the other box!? open it!!
28:50... my word I dunno why I find this so funny. Perfect scatter brain moment.
I discovered your channel only yesterday, and I’ve been on a marathon since! Great content. I’m considering buying the BCB-60 but I have one question - since it has a non-isolated power supply, does it have noise issues commonly associated with them?
depends on the combination of pedals you use
@@EytschPi42 Do you think you could convince Thomann to produce a board similar to to this under the Harley Benton brand? maybe a bigger version (2 Rows with 2 expression pedal spots up front) but with input's and Stereo FX loop and outputs just like the Boss BCB-60, maybe with buffer for between £100 - £200
@@carlmclean9304 anything else your majesty?
@@indrajithak47 Ha ha smartass
Also I actually have stood on the BCB-60 with no problems! The only thing that happens eventually is that the locking catches tend to break off . . .
Hey dude! You were so confusing when you talked about how to connect some pedals in effects loops!!!!
Now I want a BCB-60. Well done Henning, well done.
Now put the ES-8 on it and try if you can handle that!
+Audio Joe =)
Hello - Can you run a 12V TC Nova delay pedal off the daisy chain of the BCB60 ? Thank You
no
@@EytschPi42 - Just thinking, could you not 'daisy chain' to 9v std outlets into one 18v (Sorry my electronics skills do not know if 9v + 9v actually = 18V lol) Thanks
Thats awesome more exposure for Milos. His Super-Germaniac is my main pedal now.
Nice ittle kit.
I dunno what kind of plastics they use but they seem to be durable over the years, I might get one of these for a smaller option than my monster-board.
That Simble sounds really cool! Looking forward to the reviews :D
Would you recommend to put the Uni Vibe I the effects loop?
Will it fit a Digitech Whammy DT? Thanks
I use this board and I love it, but don't use the included power supply. It makes the whole rig noisy. Also if 6 pedals are not enough just buy another of these boards and then you have 12 pedals!
What power supply do you use?
@@sid35gb Just the normal Boss PSA you can buy separately. It costs some money so I guess it was too expensive for them to include with the board.
Thanks for showing interesting stuff!
I planning to build my first pedal board. It will be really helpful if you clear my doubts.
My pedal order will be Boss Compressor, Revv g4, Chorus, DD8, RV6.
Do I need a noise gate? I’m confused on this part.
Is it okay to use one high gain pedal instead of OD and then distortion?
Thank You.
Your banshee review help me to choose my guitar I hope this time you’ll be my saviour.
Peace! ✌🏻
I have been looking at the Boss BCB-60 Board online and wondering if it would be a good purchase.
Thanks for the review and thoughts on the Boss BCB-60 Board.
Pretty neat pedalboard
Is the pedalboard output buffered or just a power supply?
Thx and have a good life.
Well the last pedal in the chain was the boss RV6 so there’s your buffer. All boss pedals have a buffer.
Do you like the waza vs the analog
You should do a whole gig rig build with power supplies and g2 and all.
that set up can last for 30 or more years !! nice
It seems like you would have to do a lot of adjusting to get used to that multi scale(fanned fret) guitar.
endlich der videobeweiß!! Es sieht wirklich aus wie Kaffe :D
I would consider this board just based on boss's pedal construction. If I buy something that doesn't make noise I want it to be a tank. Of course, it is more fun to build your own (pedal board), and suffer its defects, than to buy something proven, lol Also, to my ears, I am still liking the keeley mods I have heard (on the bluesdriver), but the waza voicing isn't bad.
Also I'd like to know if the inputs and outputs are buffered, there's no info online or in the manual about it.
+james souleyrette I would suspect that they are not. Probably just a straight away connection. But I don't know for certain.
+Josef Räder well I would think maybe because you have to have the board powered for you to use the board, if it was a straightaway connection it wouldn't have to be powered right?
+james souleyrette It is powered to power the pedals you put into it. It's and integrated power supply
+Josef Räder but the inputs won't work if it isn't powered, if you just take a cable and plug it into that input A and try to go out output A without the board being powered it won't work.
+james souleyrette Then there might be some kind of buffer. Otherwise it should pass the signal through without being powered
hey henning, music is our passion too, so whats in the thomann box ???
Boss quality - can't even break that with a tank. Someone from USA should test that one.
Super Video! Bekomme ich da auch mein Bigsky rein, ohne Angst haben zu müssen, dass der Deckel auf die Potis drückt ?
How about a Waza BD comparison to the Keeley Oxblood Henning?
I think you should use the Viscous Vibe before drives next time. sounds better..
the PBOOOUUUAHHJJ sound. It's a great kind of sound, when a guitar makes it. When people make it it can be funny, unless they're vomiting.
Good tones from that bd2 waza.
looks nice and clean :)
19:55 - 20:20 song ?
how did you like the quality of the cables? any noise issues?
+Juan Pablo Calvo One of the power cables had a dodgy contact, but I got it second hand. The patch cables aren't noisy, have a relatively low profile and, to my ears, don't kill your tone. However, the lack of real space for a power supply means you're going to struggle with daisy chaining it all and enjoying the subsequent ground loop hum if your pedals happen to disagree.
+Martin Krauser great info! Thanks Martin!
This board has been in their catalogue for decades...i'va had one for over 10 years. why review it now? Did i miss something?
+Patsboem88 I was asked by a fan to review it !
+EytschPi42 right, makes sense. Nice of you to do that!
Vibe BEFORE the distortion
What's the power rating (milliamps) on the power supply
+nathan shw 2000mA
Ok its 2000
+EytschPi42 thanx Henning I got inpatient you said right at the end of your video
nice room dude...actually not nice is amazing :(
i feel a little jealous but happy for you :)
what about if i want to putt a noise gate there?effect loop or at front of amp???
ty
thanks to you im thinking about doing reviews as well! thanks, any tips?
Love the video
from the start of the video it sounds like we will be getting a lot more videos, at least until the street is completed.
Very nice pedalboard, i am actually thinking about buying a board but it has to wait (so many other things to buy wityh amp as the first one :D)
One of very few good things by Boss (only other good things by this company i know are tuner and looperswitcher
I'm an idiot, Henning. Talk to me like one.
Pondering putting together my first pedal board, could you do a video about your preference "bare-bones" style board and powering it etc? That would be awesome.
That flying rats ass, I finally figured out what it means: a flying rat is also known as a pigion therefor a flying rats ass is the asshole of a pidgion.
Kommt da noch ein eigenes Video für das BD-2wz ? 7-saiter kann man sich damit ja nicht ernsthaft antun... ;) Nimm doch mal bitte eine Tele dafür :)
Henning you must be so de-sensitized to new gear by now. You get it almost every day :)
Blues driver is a classic awesomeness pedal! How u r enjoying this Ibanez isnt? Hehe!
Gutes Video! Liebe Grüße aus NRW
WTF's with them wanting all that bucks to fix the street. Do you not pay road tax where you live or something Henning. Never heard of that over here, and bloody hell I would be in the shit if I had to find that money every now and then to fix the bloody street. Scandalous if you ask me.
I quite like this pedal board by Boss. I love how it's so compact and something you could quite easily use at home and put away easily when finished. saves having a load of pedals and wires everywhere. Must admit the case it comes in looks like the sort of thing you would get power tools such as drills and that in, and it even looks like the sort of thing one might even hang on a wall in a garage (LOL)
Excellent demonstration and video as ever, and the more I see these pedals, the more it even makes me thinking of maybe getting a cheap amp and some pedals, and going into recording analogue instead of using my virtual racks. I used to have a couple of Boss pedals years ago and they was real quality, though back in those days I never even dreamed of hooking them up together and only ever used them separately. I am loving the combinations you can get from having a pedal board and all the pedals wired up to each other this way, so you can experiment in getting, perhaps your own unique sound.
There was a similar thing at our place, we had to pay a shitload of money because they repaired/renewed the street.
Seems to be kinda common in germany.
+Audio Joe I could not afford to live there for sure. I mean come on 8K for 4 metres if that was me I would get a pickaxe, shovel and the materials and do it myself. Fuck paying that (LOL) Robbing fuka's man.
+Lee Lucas I don't understand it either, but there is nothing you can do about it.
14:25 all i want to hear...ty you sir and keep up the good work.. Subscribe and like,well done again!
Dude? If I send you a post dated check for $8000.00 for your street repair, can I have that Boss BCB-60 pedal board?
You’re in FFM?
Wetzlar
You can busk in the other streets to pay for your own! With your guitar and facemaking skills, you'd have it no time at all. Hah! Then you'd have to demo battery amps, portable power supplies and foldable chairs. :P
Incindentally, I busk using the BSB-60, and while it's not heavy and the hard plastic is sturdy and feels protective, I like the lightweight, small-footprint and affordable mini pedals, which are a very poor choice for this board. And almost a half of the surface gets wasted, which is really bad in what you want to be a portable setup. I'll try to trade it for a new Palmer board with the soft carrying case.
BTW, are you gonna demo that Simble or what? :P
good go m8!
I'm a little bit "verklemmt"😂😂😂
+Louis Oskar Lustermann
Haha, it's Yiddish, and spelled 'verklempt' or even 'farklempt'...
It stems from the german word of course but hasn't the exact the same meaning anymore.
Are you from Germany ?
Also left a sub for your funniness
Don't you have a tuner(about10 mins in)
Mongolia 🇲🇳
So, you get those coffee mugs from Ikea? I will now be getting some! I love those little tabs on the bottom!
+Fonzy Brookestone Did Henning just accidentaly demo an Ikea cup?
Martin Krauser Ha, I think so! Too bad I can't find them, or he would have made them some money!! Someone needs to send in coffee mugs they want demo'd, ha.
Next video, there's going to be a referral link to buy them. :P
ps: please dont open this side, steht auf beiden seiten.....und vielen Dank für den Bericht! Werde mir den Koffer kaufen. Zum Einen habe ich bis auf ein Zoom G1Next ausschließlich Boss Effekte, zum Anderen bekomme ich ein Netzteil incl. von Boss und zu allem Überfluss mit Deckel, der vor Staub schützt.... sehr, sehr Geil....
Who gives the flying rats ass? A flying rat, i believe.
I want to be your friend and come on a play date. 😆
Sorry mate, the EU is really out of control these days. Better off without them if you ask me.
Please open that thomann box!!
+marconteurs94 Yeah...Henning is teasing us with that huge Thomann box in the background!!
Exactly!!
Wow, that story about the street is totally crazy. Those knuckleheads should come up with a different way of getting the funds, instead of asking their citizens. What a big pile of bull.
Disgusting coffee slurping turned me off, I will change channels now.
"Beer" sound, that's a new one... Why does everyone shit on boss? I love there pedals, but never understood why so much hate? Where do you stand on this matter?
I think he meant "beer" in a good way, like a good dirty sound.
+Audio Joe haha ya, I just thought it was humorous
+LegendaryK4 I think it was ;)
+LegendaryK4 I used to hate BOSS, I think because it was too mainstream and they sometimes praised themselves too much. I wanted to be different and somewhat of a rebel I think :p When I grew older I let my ears and experience decide and now have the BOSS DD-20 delay and Super Chorus on my board. When nitpicking though, I have found more than often BOSS pedals come with some noise when they are engaged but yeah, so do some much more expensive pedals :) And I'm not talking about dirt pedals but modulation btw, where extra noise is really not expected. What I really do like about BOSS is that they just work and are built like a freakin' tank ! I also like the big footswitch they use, much less chance you miss it when wildly rocking out on stage and moor sturdy. I wish more brands would use these style of switching instead of the little knobs.
wenn du mal kein Dachschaden hast 😂
You know what ? Boss sucks! (Except es8)
too much talking