HOW TO FORSCAN F150, +Bambi mode, Disable start/stop, door chime
Вставка
- Опубліковано 21 сер 2024
- I got through how to get the ability to use forscan and some things you can change using it. Went over removing Sirius, enabling hi beam/fogs, auto start/stop and removing door chime.
Forscan footage starts at 5:30
OBD2 FOR FORSCAN
OHP ELMconfig Elm327 OBD2 USB...
amzn.to/2XcFJxQ
FORSCAN SPREADSHEET
docs.google.co...
I just disabled the start / stop on my 2020 F150, but for whatever reason, just re-writing the BCM in itself didn't work. Once I went into the FCIM and disabled the switch, the start / stop was then completely disabled. To each their own, but I purchased the extended license because I like to support the developers of the programs I use. Being able to permanently disable the most annoying feature on this truck is easily worth the price.
Something people need to keep in mind when they're using this..watch your battery voltage. The modules in these new vehicles are extremely voltage sensitive. They have a comfort zone, especially when it comes to programming. The vast majority of times, a vehicle is hooked up to battery sustainer when programming is done at the dealership. If your battery voltage starts dropping below threshold when you're in there re-writing things, you could potentially have issues. Whether you're programming, or performing diagnostics, always make sure you have proper battery voltage. It'll save you a lot of potential headaches.
Love the beer in the cup holder 😂
One of the best videos for beginners.
I find the Auto Start/Stop feature as a gas saving and safe driving tool. I have a 2017 F-150 and at 1st didn't like it but found that if you anticipate stops you can do so which allows the engine to stay on. To do this slowly apply the brakes until the truck comes to a stop. If for instance you are in bridge traffic just press on the brakes further and the engine will stop. Another bonus is you'll extend the life out of your brake pads!
Through a Ford engineering study that they did the auto start/stop saved between 1.9%-11% in new York city traffic. So unless your driving in that the amount your saving is less than 1mpg.
@@WICKEDAUTO1 I live on the coast, Gloucester, Ma to be exact. We have a drawbridge that separates Gloucester in two, an island side and the mainland. The Blynman Bridge avg. 10k openings per year making it one of the busiest in the world. Marine traffic has right of way and it's common to wait 15 minutes or more. Us locals are used to turning off our engines while waiting. I think Ford had us in mind when developing the Auto Start/Stop feature!
@@CapeAnnImages o wow, not only do I envy your location but this feature is definitely made for yall! Lol
@@WICKEDAUTO1 Here's the story on my F-150 and a little snap shot of where I live. capeannimages.blogspot.com/2017/10/new-wheels-for-lens.html
@@WICKEDAUTO1 1 mpg in a 26 gallon tank is about $5 per tank around here. It adds up if you drive in traffic most of the time. I think most people who complain about it have never seen traffic before and in that case they are perfectly justified. I bought my 2019 F150 used and this was already done. I am one of the few who want to re enable it. I think for most people if Ford just reversed the switch so it enables it rather than disables it, Ford would have a hit on their hands . . . then in the menu give you the option to reverse the switch so its on by default or vice versa. Now I just need to find where to get a copy of that spreadsheet. . . . OK this is an update . .. I found a spreadsheet but its not for my vehicle. If I use the before settings for the engine stop start (from this video) it thinks my truck is a 4 x 4 and since it is a 4 x 2 it throws a code. I need the stock settings for a F150 2WD for stop start.
Dude, is that a beer in your cup holder @ 2:23👌
yup.. a crona...dude is litterly drinking and driving...
Hopefully you’ll be able to upload your perfected settings to the replacement vehicle. That’ll be gratifying! Thanks for another well done video.
dude great video
i just signed my life away with a 19 platinum
im terrified to void the warranty but man this is compelling
nothing voids the warranty unless they can prove that whatever you did is what caused the problem. With forscan as long as you save your factory settings before making at changes, you can always change back to factory.
Ford has their ETIS site where you enter your vin and get the *Just-left-the-factory* configurations in case something does go wrong, and its not a module failure.
Bryan Dunn do you have a link?
CORRECTION!!!!: I was partially incorrect, buried in the ETIS site is a link for where to obtain the AS-BUILT data. The site is: motorcraftservice.com/AsBuilt
Shawn J I have a 19 platinum too, have you made any changes yet? I’ve tried, and so far there are a lot of modules that didn’t pop up for me. I changed the double honk when leaving the truck with it still running, and add the heated/cooled seats to the home screen. No my TPMS is displaying. Have you run into this yet?
Hola que tal.
Muchas gracias por compartir tú conocimiento con nosotros.
El programa es muy bueno, funciona y es barato para comprar.
Hi, how are you? Thank you very much for sharing your knowledge with us. The program is very good, it works, and it is cheap to buy.
Gracias Desde México.
Good info 👍
Great video! But where did you find the spreadsheet sheet? Just ordered my obd2 reader 😬
Its from the forum, enjoy all the changes!
docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/edit#gid=815852466
Good info but with my
Computer skills I best leave it alone 😉
New version of Forscan doesn't show any codes at all - it lists the specific items by name and you just go in and enable, disable, or choose any available option.
is it opening driver side door, during coding with forscan? Have a nice day!! :-)
It'd be nice if the team blessing us with this free software would consider changing the name to something that doesn't sound quite so much like, "foreskin."
Forscan is a poke at the VW original, called VAGCOM.
Hi, I have an fiesta mk8 and I'm trying to disable start and stop but I dont have 726-48-02, it end on 726-27-07. Why?
I want to disable that.
Its just programmed differently, not all programming through forscan will work on all their models
silly question- i got a 19 lariat 3.5, two sons drove it and went out and got their own new 3.5s too- but XLTs...neither noticed till a couple weeks later, mine sounds like a v8, theirs dont...did some checking, 'enhanced engine sound' is fake v8 noise played thru the stereo system...sucks as its fake, but it does add to the 'bigbock feel' of driving te 3.5... I see in raptors it can be shut off with forscan- wondered if it could be turned on with XLT trim? oldest son drove mine again today, and swears the sound really made it 'feel' stronger... wonder if it could simply be turned on, or if stereo upgrade required...
I believe the forscan fix is for any trim level. Just check the spreadsheet for the change and see what the truck says and just go from there.
Where do you find the spreadsheet for all the codes on everything that can be modified. I have a 17 fusion platinum edition, and am very new to all of this. I’m actually a bit nervous but I hear so many great things about being able to change settings and enable and disable certain features.
In the description
WickedF150 Thank you for the fast reply. I’m don’t mean to keep bugging you man, but do you have any idea where or how I can find spreadsheets like what you showed but for a 17 fusion vs. f150s? I would greatly appreciate your help man.
@@rjlott9453 no problem and your fine man that's exactly what the channel is for! There is not spreadsheets for other models, 15+ Fords are basically the same. I programmed my wife's edge with the same spreadsheet. Some is different so just have to try your luck. I wouldnt add extra features but just changing stuff like...screen background/theme, seatbelts dings, global windows...all that is fine.
Hey man, when you changed that value for the auto start/stop what did it do? Because the notes don't say anything for the first code
It turns it off but it also then doesn't allow the battery management system to work, no idea what all that entails though
WICKEDRIDESZ Oooh okay I thought it would make the deffault to off, makes sense thanks
hey wicked auto.........how do i disable the really fricken annoying bounce back feature in the windows for my 2015 f150 i mean disable permanently as in forever and ever. thanks
I am not sure, you should check the forscan website forums and/or spreadsheet to see if it's possible
I wish I could add a picture here to help show what I am about to describe....I have a 2011 F150 XLT Super Crew. Above the stereo head unit is a digital display. It just sits there..I would like it to scroll either way because it hides a lot of my music information I want to see.....Do You know any way to make that happen? Thanks
Send a picture to the fb page
facebook.com/WickedF150-109302690410438/
I bought the adapter cable and downloaded Forscan and no matter what I try I can't get my computer to recognize the adapter cable when I try to connect. I need help !!
I know this is way late, some cable need an update software to work properly.
@@akbychoice I appreciate the advice. I had to buy a Bluetooth adapter, it worked fine.
Hello Sir, does any of this work with Ford Escape Hybrid 2012? If not, please advise where should I look. Thanks
More than likely not as this spreadsheet is 15+ but im not sure of any for a 12 escape
Can this be used with MacBook?
Does your dealership give you grief for changing settings on your truck? I talked to my dealership and they told me, it would violate the warranties and they would not honor anything that breaks.
No they haven't at all, they knew from the very first visit that I changed stuff. And they also cannot, not honor the warranty just because of that depending on what you change of course. For instance doing the global windows...that has zero affect on anything else so if your engine stops running right they cant say its because of the window through forscan. Plus you can always put everything back to stock before you take it in.
I wanted to be upfront with my dealership too before I did any modifications, but they are not comfortable about them at all. I live in a smaller town. They don’t they get many folks that want to modify their trucks. They did tell me that Ford is working on a patch to change the “Start/Stop” to a constant stop for owners if they want. But who knows how long before a patch is released. Thanks for your info! Keep up the good work!
@@BigTv8power well technically speaking they have to prove any modification you perform was the direct result of the failure of the warrantied* part to not cover it. But goodluck!!
Hello! I have a 2015 F150 , where is that I can find the spreadsheet
THE DESCRIPTION
Where did you get the spreadsheet for the codes?
The forum
What running boards do you have??
The factory 5 in wide ones...
I think it was in this video that you mentioned the GPS color screen changes you did in Forscan, can you please direct me to that mod? Thanks!
No that's not possible that I know of. I changed the whole theme/color of the entire sync system but the navigation is the same no matter what. I had changed it to where I could type in an address while driving with forscan, I'm not sure anymore what section that was in
do you know how to disable the speed limiter
Believe it can only be through an actual tune
How can we get the license to be able to modify the settings? I email forscan and haven’t gotten a response back from them
ua-cam.com/video/VeDZPgYjUdY/v-deo.html
Getting the license starts at 11:25
WickedF150 thank you for the helpful information, I was able to add the trailer control setting and now I am trying to go to the spreadsheet that you are showing at @9:58 but it seems that I am missing a step or the video cuts off for a second
@@frankperez166 the link for the spreadsheet is in the description