Alfa Romeo Giulia Stelvio Read and clear codes using your iPhone/ android
Вставка
- Опубліковано 27 вер 2024
- How to use the od2 WiFi adapter to read and clear codes on Giulia and Stelvio as well as extra features
OBD2 adapter
amzn.to/3Fa1aU6
SGW gate (late 2018 up) needed to clear you can read without
shopeurocompul...
My Alfa Romeo storefront! OBD tools, cosmetic carbon, interior exterior mods. Multiecuscan cables
www.amazon.com...
I recently bought a used 2020 Stelvio Ti Lusso with 35,000 miles. I was super skeptical about the company's longevity because of rumored reliability and lack of dealerships in the states, but I've loved the look of the Stelvio since it came out and dove in because I've been watching your videos. I know it's not a Giulia, but I'm guessing despite the body differences, they're mechanically similar. I just bought an OBDLink MX+ right before seeing this particular video. I'm hoping it's comparable to the one in your video. This being said, I just wanted thank you so much for your tips and advice. Also, I really enjoy watching your videos. Keep up the great work.
Thanks for your words of advice and sharing your opinion
Your welcome thanks for watching!
Great video man! Keep up the great work!
Thank you!! I’ll be rolling out the content. I just got a cracked windshield so guess that will be an up coming repair one
@@alfamods2.0T hate to hear that! But, take the lemons and make lemonade! Additional content!
Been subbed since May 2024. When I bought my Giulia I found your channel to be the best.
So helpful thanks !
I don’t have a check engine light but I have an icon and a “service electronic throttle control” will that scanner help me figure out what the problem is with that?
Great video, thank you. Where'd you get the oem spoiler and is it held on by 3m tape? How much did it cost?
You can get OEM spoiler from people who change spoiler I have guy near me that has one for sale it’s just 3m tape yes. You have to trim down a few things on the OEM one since it is supposed to be mounted with bolts. I paid 325
Can you HELP. I have change my oil. How do i clear "days to oil change" ?
That one is annoying and takes a lot of attempts but it works. Keep in mind all this has to be done pretty quickly within 10 seconds.
1.Close the door
2.ignition on (don’t start)
3. Press gas pedal to the floor until clicks 6 times with in 10 seconds so quickly
4. Turn ignition off then start the car.
Took me 15 tries to get it but it works I’ll make a video next time I have to reset it
Where did you get that biscone badge for the fenders?
They are made by Koshi if in the USA madness autowerks sells them if outside the USA buy from koshi directly. They are super high quality
@@alfamods2.0T nice! Also I’m newly subscribed to your page and you’ve definitely put out helpful content with constructing my poor man’s QV lol
Will it clear esc, ast ,and brake codes or just engine codes
You need multiecuscan with the grey and blue obd2 adapters if you wanna clear the abs.
Do u have a link for the adapters
I need to do the same.
To clear esc and brakes codes Can you please help !
Can I do the proxy alignment with it? I have a 2017.
@@Joker-n4s no multiecuscan or alfaobd only or dealership Witech
One more question. My mileage stopped flashing but my ESC MIL is on does it have anything to do with the proxy alignment?
Can you do an oil reset with it?
Not with car scanner you can download
Multiecuscan that can do oil resets on the paid version it’s specific for alfa Romeo/ fiat diagnostics
@alfamods2.0T could you add a link for this multiecuscan? I need to do the same. Thanks.
Does it work without SWG module in the newer model?
You can read without it but to clear codes you need it. SGW is worth getting and leaving installed.
Hi There, I recently changed out my front brake pads on my 2020 Alfa Romeo Stelvio (I bet you know where this is going). I didn't realize I needed to disconnect the negative cable to the battery. So, I have all types of lights lite on the dash. The car is also in "limp" mode, only the front right and rear left brakes are operating. Will this scan tool be able to clear that issue and all the lights? Thanks for you content...I wish I saw your video about disconnecting the battery before I did it! THANKS!
Where you ever able to fix this problem? It just happened to me yesterday and I’m trying to get rid of the codes
When i try to buy it it says “This item cannot be shipped to your selected delivery location. Please choose a different delivery location.” :(
Where are you located? Maybe I can send you another link if your outside the USA
@@alfamods2.0T California…
@@Smilldon wow that’s crazy surprising
www.ebay.com/itm/153187642003?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=LOFGd1ROSh2&sssrc=2349624&ssuid=sXsLlHlLSQe&var=&widget_ver=artemis&media=COPY
@@alfamods2.0T that one works thanks!
@@alfamods2.0Tthis link no longer works
Liked and subscribed!
Thank you!